Buku Panduan Headset Interkom Nirkabel SYNCO XTalk XPro (Xpro5 Lima Pamaké)

Bubuka

This manual provides detailed instructions for the setup, operation, and maintenance of your SYNCO XTalk XPro Wireless Intercom Headset (Xpro5 Five Users). Please read this guide thoroughly to ensure optimal performance and longevity of your device. The SYNCO XTalk XPro series features enhanced signal reception, advanced Acoustic Echo Cancellation (AEC) technology, and a MasterFree Algorithm for flexible team communication.

Naon dina Box

The SYNCO XTalk XPro5 package includes the following components:

• 5 x Headset SYNCO XTalk Xpro
• 3 x Charging Stations
• 5 x Batré Lithium Ion anu tiasa dicas ulang
• 3 x Kabel Ngecas USB-C
• 5 x Kaca Depan Mikropon
• 5 x Bantalan Busa Ceuli Hiji
• 1 x Kantong Panyimpenan

Kanggo pituduh visual ngeunaan eusi bungkusan, mangga tingali pidéo unboxing di handap.

Disetél

Follow these steps to set up your SYNCO XTalk XPro headsets:

1. Ngeusi batre: Ensure all Lithium Ion batteries are fully charged using the provided charging stations.
2. Selapkeun Batré: Open the battery compartment on each headset and insert a charged battery.
3. Attach Mic Windshield: Place the mic windshield onto the microphone boom arm for improved audio clarity.
4. Daya Hurung: Locate the power toggle switch on the headset. Push the switch upwards to power on the headset. The headset is pre-paired from the factory (except XPro1) and ready to use. To ensure successful auto-reconnect, turn on the headsets in the sequence of Master → Level 1.
5. Pareum listrik: Push the power toggle switch downwards to power off the headset.

Parentah Operasi

The SYNCO XTalk XPro headsets are designed for intuitive team communication. Here are key operating features:

• Algoritma MasterFree: The system intelligently designates a master headset, allowing any unit to function as the master. This ensures continuous communication even if a master headset is lost or runs out of battery.
• Enhanced Signal Reception: An additional antenna design provides more stable communication over distances up to 500m (1,640ft) Line of Sight (LOS).
• AEC AI Technology: Active Acoustic Echo Cancellation (AEC) spanning 150Hz to 7kHz eliminates echoes, reverberation, and ambient noise, ensuring clear voice recognition in noisy environments.
• One-Button Remote Muting: The master headset can instantly mute all remote headsets, useful for managing conversations.
• Modeu naekeun: Enable intelligent spectrum switching with a click of a button to enhance communication quality.
• Pangimeutan sacara real-time: Utilize the 3.5mm jack for real-time audio monitoring from devices like cameras and recorders, allowing seamless communication while monitoring.

Masangkeun Headsét

The SYNCO XTalk XPro headsets are designed for easy pairing. For initial setup or re-pairing, use the SYNCO EasyGo software.

1. Download EasyGo: Ensure you have the latest version of SYNCO EasyGo software, firmware, and voice packs from the official SYNCO websitus.
2. Sambungkeun Headset: Connect one headset to your computer using the provided USB-C data cable.
3. Power On Headset: Turn on the headset. If the connection status in EasyGo shows 'Not Connected', try reversing the cable on the headset end and reconnecting.
4. Select Firmware & Voice Pack: In EasyGo, select the appropriate firmware (e.g., X5-BP LOW for 5 users) and voice pack.
5. Initiate Firmware Update: For the first-time firmware update of an X series headset, long-press the '+' and '-' buttons on the headset simultaneously until you hear two beeps, then a third beep. Release the '+' button first, then the '-' button, and immediately click 'Install' in EasyGo.
6. Restart Headset: After successful installation, unplug the cable and restart the headset. Repeat this process for all headsets.
7. Prosés papasangan: Once all headsets are updated, go to the 'Pairing' tab in EasyGo. Select the quantity of headsets (e.g., 5 for Xpro5). Click 'Start'. EasyGo will guide you to connect and power on headsets in the sequence of Master, Level 1, and Level 2.

Firmware Update

Regular firmware updates ensure your SYNCO XTalk XPro headsets have the latest features and performance improvements. Use the SYNCO EasyGo software for this process.

1. Download Updates: Obtain the latest firmware and voice pack files from the official SYNCO websitus.
2. Sambungkeun Headset: Connect one headset to your computer using the USB-C data cable.
3. Open EasyGo: Launch the SYNCO EasyGo software.
4. Select Firmware & Voice Pack: In the 'Install' tab, select the correct firmware file (e.g., X9_MAX_V2.0.5 for XMax) and the corresponding voice pack.
5. Install Update: Click 'Install' to begin the firmware update. Follow any on-screen prompts.
6. Restart Headset: After the installation is complete, unplug the data cable and restart the headset.
7. Repeat for all headsets: Perform this update process for each headset in your system.

Pangropéa

Proper maintenance ensures the longevity and performance of your headsets:

• beberesih: Use a soft, dry cloth to clean the headset surfaces. Avoid harsh chemicals or abrasive materials.
• Panyimpenan: Store headsets in the provided storage bag in a cool, dry place when not in use.
• Perawatan batré: Fully charge batteries before long-term storage. Avoid extreme temperatures.

Pamérésan masalah

Upami anjeun ngalaman masalah, cobian léngkah-léngkah ngungkulan masalah umum ieu:

• Teu Aya Sora/Sambungan Peuting-peuting: Ensure headsets are fully charged and within range. Check pairing status via EasyGo.
• Kualitas Audio goréng: Verify mic windshields are properly installed. Check for environmental interference.
• Headset Not Powering On: Ensure battery is correctly inserted and charged.
• Masalah Pembaruan Firmware: Ensure the data cable is securely connected and try reversing it. Confirm the correct firmware version is selected in EasyGo.

spésifikasi

Garansi sareng Rojongan

For warranty information and technical support, please visit the official SYNCO websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen resi pameseran anjeun pikeun klaim jaminan.