Brilluxa UT89XD Digital Multimeter Instruction Manual

1. Émbaran Kasalametan

Please read and understand all safety information and operating instructions before using this multimeter. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Salawasna pastikeun multimeter aya dina fungsi sareng rentang anu leres sateuacan ngukur.
• Ulah ngaleuwihan nilai input maksimum nu ditangtukeun pikeun tiap rentang.
• Pariksa heula kabel uji pikeun ayana karusakan sateuacan dianggo. Ganti upami insulasi na rusak.
• Do not use the multimeter if it appears damaged or is not operating properly.
• Laksanakeun ati-ati pisan nalika damel sareng voltagnyaeta luhur 30V AC RMS, 42V puncak, atawa 60V DC. Ieu voltagÉta nyababkeun bahaya shock.
• Ganti batréna langsung nalika indikator batré lemah némbongan pikeun mastikeun bacaan anu akurat.
• Ulah ngajalankeun multimeter dina gas ngabeledug, uap, atawa lingkungan berdebu.

2. Produk Langkungview

The Brilluxa UT89XD is a professional digital multimeter designed for accurate and reliable electrical measurements. It features True RMS detection, NCV (Non-Contact Voltage) measurement, LED test function, and a clear backlit display with a flashlight for use in various environments.

Gambar 2.1: Hareupeun view of the Brilluxa UT89XD Digital Multimeter with included test leads.

Fitur konci:

• Professional NCV (Non-Contact Voltage) detection for identifying live wires without direct contact.
• Pangukuran RMS anu leres pikeun bacaan anu akurat dina bentuk gelombang non-sinusoidal.
• Ukuran DC/AC Voltage up to 1000V and DC/AC Current up to 20A.
• 100mF large capacitance fast charging measurement.
• Dedicated LED test function (UT89XD model).
• Integrated flashlight and automatic screen backlight for visibility in dark conditions.
• Audible/visual alarm for various functions including V/A/Cap/Diode/hFE/NCV/Live/LED.
• Data Hold function to freeze displayed readings.
• Automatic power off to conserve battery life.

3. Setélan

3.1 Pamasangan batré

The UT89XD multimeter requires four 1.5V (R03) batteries for operation. Batteries are not included.

1. Teang panutup kompartemen batré dina tonggong multimeter.
2. Paké obeng pikeun loosen screw nu ngamankeun panutup batré.
3. Cabut panutup batré.
4. Insert four 1.5V (R03) batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
5. Ganti panutup batré jeung tighten screw nu aman.

Gambar 3.1: Tukangeun view of the multimeter, indicating the battery compartment location.

3.2 Sambungan Kabel Uji

Sambungkeun kabel uji kana jack input anu pas dina multimeter:

• Nyambungkeun beureum test lead to the VΩHzLED jack pikeun voltage, resistance, frequency, LED test, and other measurements.
• Nyambungkeun hideung test lead to the COM (common) jack for all measurements.
• For current measurements up to 600mA, connect the beureum test lead to the mAµA jack.
• For current measurements up to 20A, connect the beureum test lead to the 20A MAX jack.

4. Parentah Operasi

To operate the multimeter, turn the rotary switch to the desired function. Use the PILIH button to toggle between different measurement modes within a single rotary switch position (e.g., AC/DC voltage, Dioda/Kontinuitas).

Figure 4.1: The UT89XD multimeter being used to measure components on a circuit board.

4.1 DC / AC Voltage Pangukuran

1. Hurungkeun saklar rotary ka V~ (Vol. ACtage) atawa V- (DC Voltage) posisi.
2. If the switch position covers both AC and DC, press PILIH pikeun milih mode nu dipikahoyong.
3. Sambungkeun lead test sacara paralel ka sirkuit atanapi komponén anu diuji.
4. Baca voltage nilai dina tampilan.

4.2 DC/AC Current Measurement

Awas: Never connect the multimeter in parallel to a voltage source when measuring current, as this can damage the meter and pose a safety hazard. Always connect in series with the load.

1. Hurungkeun saklar rotary ka mAµA~ (Arus AC) atanapi mAµA- (Arus DC) atanapi 20A~ (Arus AC) atanapi 20A- posisi (Arus DC).
2. If the switch position covers both AC and DC, press PILIH pikeun milih mode nu dipikahoyong.
3. Connect the test leads in series with the circuit. Ensure the red lead is in the correct current input jack (mAµA or 20A).
4. Baca nilai ayeuna dina tampilan.

4.3 Résistansi Ukur

1. Hurungkeun saklar rotary ka Ω posisi.
2. Pastikeun sirkuit geus dipareuman énergina sateuacan ngukur résistansi.
3. Sambungkeun lead test kana komponén anu bakal diukur.
4. Maca nilai résistansi dina tampilan.

4.4 Pangukuran Kamampuh

1. Hurungkeun saklar rotary ka nF posisi.
2. Pastikeun kapasitor discharged pinuh saméméh pangukuran pikeun nyegah karuksakan méteran.
3. Sambungkeun lead test peuntas terminal kapasitor.
4. Maca nilai kapasitansi dina tampilan.

4.5 Pangukuran Frékuénsi sareng Siklus Tugas

1. Hurungkeun saklar rotary ka Hz% posisi.
2. Pencét PILIH pikeun ngaganti antara frékuénsi (Hz) sareng siklus tugas (%).
3. Sambungkeun kabel tés kana sumber sinyal.
4. Baca nilai frékuénsi atawa siklus tugas dina tampilan.

4.6 NCV (Vol. Non-Kontaktage) Pangukuran

1. Hurungkeun saklar rotary ka NCV posisi.
2. Move the top of the multimeter near the conductor or outlet.
3. Méter bakal ngaluarkeun sora bip jeung lampu indikator NCV bakal kedip-kedip lamun voltase ACtage dideteksi. Frékuénsi bip sareng kedip-kedip ningkat kalayan vol anu langkung kuattage.

4.7 LED Test (UT89XD Only)

1. Hurungkeun saklar rotary ka LED posisi.
2. Connect the red test lead to the anode (+) of the LED and the black test lead to the cathode (-) of the LED.
3. The multimeter will supply a test current, and the LED should light up if functional. The forward voltage serelek bakal dipintonkeun.

4.8 Diode and Continuity Test

1. Hurungkeun saklar rotary ka Dioda / Kontinuitas position (often indicated by a diode symbol and a speaker symbol).
2. Pencét PILIH to toggle between Diode Test and Continuity Test.
3. Pikeun Uji Dioda: Connect the red lead to the anode and black lead to the cathode. The forward voltage drop bakal dipidangkeun. Balikkeun kabelna; sirkuit kabuka (OL) kedah dipidangkeun.
4. Pikeun Continuity Test: Connect the test leads across the circuit or component. An audible beep indicates continuity (low resistance).

4.9 Transistor hFE Test

1. Hurungkeun saklar rotary ka hFE posisi.
2. Insert the transistor leads (Emitter, Base, Collector) into the corresponding holes in the hFE socket on the multimeter, ensuring correct NPN or PNP type.
3. Read the hFE value (DC current gain) on the display.

4.10 Fungsi Husus

• Tombol TAHAN: Pencét pikeun ngabekukeun bacaan ayeuna dina tampilan. Pencét deui pikeun ngaleupaskeun.
• Tombol Lampu Latar/Senter: Press briefly to turn on/off the screen backlight. Press and hold to turn on/off the flashlight.
• REL (Relative Measurement) Button: Used to store a reading as a reference and display subsequent measurements as a deviation from this reference.

5. Pangropéa

5.1 beberesih

Ngusap kasus kalayan iklanamp cloth and mild detergent. Do not use abrasives or solvents. Ensure the multimeter is powered off and test leads are disconnected before cleaning.

5.2 Ngagantian batré

When the low battery indicator appears on the display, replace the batteries as described in Section 3.1. Always replace all four batteries simultaneously with new ones of the same type.

5.3 Ngagantian sekering

If the current measurement function fails, the fuse may need replacement. Refer to the specifications for the correct fuse type and rating. Fuse replacement should only be performed by qualified personnel. Disconnect all test leads and power off the meter before opening the case.

6. Cara ngungkulan

• Teu aya tampilan atanapi tampilan anu lemah: Pariksa pamasangan batré sareng ngecasna. Ganti batré upami diperyogikeun.
• Bacaan anu salah: Ensure the correct function and range are selected. Check test lead connections. Verify battery charge.
• Pangukuran arus teu jalan: Check the fuse. Ensure test leads are connected to the correct current input jacks.
• "OL" (Kaleuwihan beban) ditampilkeun: Nilai anu diukur ngaleuwihan rentang anu dipilih. Pindah ka rentang anu langkung luhur atanapi pastikeun inputna aya dina kamampuan méter.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information and technical support, please contact Brilluxa customer service or visit their official websitus. Simpen resi pameseran anjeun salaku bukti pameseran.

You may also find additional product information by scanning the QR code on the back of your device or visiting the following link: Product Information (C190409390)