Bubuka
Thank you for choosing the Scheppach HMS1500 Planer/Thicknesser. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your machine. Please read these instructions carefully before initial use and keep them for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your tool.
Parentah Kasalametan Umum
PERHATOSAN: Baca sadaya peringatan kaamanan, pitunjuk, ilustrasi, sareng spésifikasi anu disayogikeun sareng alat listrik ieu. Gagalna nuturkeun sadaya paréntah anu didaptarkeun di handap tiasa nyababkeun shock listrik, seuneu, sareng/atawa tatu anu serius.
- Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu. Alat-alat listrik nyiptakeun percikan api anu tiasa nyababkeun lebu atanapi haseup. Jauhkeun murangkalih sareng jalma-jalma nalika ngajalankeun alat listrik. Distractions bisa ngabalukarkeun anjeun leungit kontrol.
- Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngaropéa colokan dina sagala cara. Entong nganggo colokan adaptor sareng alat listrik anu dibumikeun (dibumi). Colokan anu teu dirobih sareng outlet anu cocog bakal ngirangan résiko kejutan listrik. Hindarkeun kontak awak sareng permukaan bumi atanapi bumi, sapertos pipa, radiator, rentang, sareng kulkas. Aya ngaronjat résiko shock listrik lamun awak anjeun earthed atawa grounded. Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh. Cai asup kana alat listrik bakal ningkatkeun résiko shock listrik. Ulah nyiksa ari. Ulah make ari keur mawa, narik, atawa cabut colokan alat kakuatan. Jauhkeun ari tina panas, minyak, ujung seukeut, atawa bagian pindah. Kabel anu ruksak atanapi kabeungkeut ningkatkeun résiko kasetrum listrik.
- Kasalametan Pribadi: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Wear a dust mask if the operation creates dust. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- Pamakéan sareng Perawatan Alat Daya: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Specific Planer/Thicknesser Safety:
- Always ensure the workpiece is free of nails, screws, or other foreign objects before planing.
- Never plane material shorter than 300mm (12 inches) without a push block.
- Keep hands clear of the cutter head at all times.
- Ensure all guards are in place and functioning correctly before operation.
- Always feed the workpiece against the direction of rotation of the cutter head.
- Do not remove jammed workpieces until the machine is switched off and the cutter head has stopped completely.
- Connect the machine to a dust extraction system to minimize airborne dust.
Produk Leuwihview
The Scheppach HMS1500 is a versatile 2-in-1 planer and thicknesser designed for woodworking tasks. It allows for precise surface planing (jointing) and thicknessing of various wood types, ensuring straight and parallel surfaces. Key features include a powerful motor, adjustable tables, and an integrated dust extraction port.
Gambar 1: Operator using the Scheppach HMS1500 for planing wood. Always wear appropriate personal protective equipment.
Gambar 2: Rincian view of the wood passing through the planer, demonstrating the precise cutting action of the 2-blade cutter head.
Gambar 3: The machine features transport handles and wheels for easy mobility within the workshop.
Gambar 4: Pahareup-hareup view of the Scheppach HMS1500, showcasing its robust construction and controls.
Gambar 5: Tukangeun view of the machine, highlighting the integrated dust extraction port for a clean working environment.
Gambar 6: Tilu saparapat view of the Scheppach HMS1500, showing the planer tables and thicknesser bed configuration.
Catetan dina Video: Teu aya pidéo produk resmi ti nu ngajual anu relevan pikeun dilebetkeun kana manual instruksi ieu.
Setup sareng Majelis
Before operating the machine, ensure it is properly assembled and secured. Refer to the assembly diagrams in your packaging for detailed steps.
- Ngabongkar bungkusan: Carefully remove all components from the packaging. Check for any damage during transit. Retain packaging for future transport or storage.
- Majelis Dasar: Assemble the stand/base according to the provided instructions. Ensure all bolts are securely tightened. The machine is heavy (71 kg), so assistance may be required.
- Machine Mounting: Mount the planer/thicknesser unit onto the assembled stand. Secure it firmly using the provided fasteners.
- Sambungan Ékstraksi Lebu: Connect a suitable dust extraction system to the integrated dust port. This is crucial for maintaining a clean workspace and for your health.
- Sambungan listrik: Ensure the power supply matches the machine's requirements (220-240V). Plug the machine into a grounded outlet.
- Cék awal: Before first use, manually check that all moving parts are free to move and that all guards are correctly positioned and secured.
Parentah Operasi
1. Planing (Jointing) Operation
- Adjusting the Infeed Table: Set the desired depth of cut using the infeed table adjustment knob. The maximum depth of cut is 3mm.
- Nyaluyukeun pager: Position the aluminum fence at the desired angle (90-135°) and secure it firmly.
- Ngasupkeun Benda Kerja: Place the workpiece on the infeed table. Ensure it is flat and free of defects. Turn on the machine. Carefully feed the workpiece into the cutter head, keeping your hands away from the blades. Use push blocks for shorter pieces.
- Maintaining Pressure: Apply even pressure to the workpiece as it passes over the cutter head and onto the outfeed table.
2. Thicknessing Operation
- Converting to Thicknesser: Lift and secure the planer tables out of the way to expose the thicknesser bed.
- Adjusting Thickness: Use the handwheel to adjust the height of the thicknesser table to achieve the desired final thickness. The maximum thicknessing height is 160mm.
- Ngasupkeun Benda Kerja: Turn on the machine. Feed the workpiece into the thicknesser opening. The feed rollers will automatically pull the wood through. Do not force the workpiece.
- Sababaraha Pass: For significant material removal, take multiple shallow passes rather than one deep pass to prevent overloading the motor and ensure a smoother finish.
Pangropéa
Regular maintenance ensures the longevity and safe operation of your Scheppach HMS1500.
- beberesih: After each use, disconnect the machine from the power supply. Clean all wood chips and dust from the tables, cutter head area, and dust extraction port. Use a brush or compressed air. Do not use solvents that may damage painted surfaces.
- Inspeksi agul jeung ngagantian: Regularly inspect the planer blades for sharpness and damage. Dull or chipped blades can lead to poor finish and increased motor strain. Replace both blades simultaneously to maintain balance. Refer to the detailed instructions in the full manual for blade replacement procedures.
- Table Lubrication: Periodically apply a thin coat of dry lubricant (e.g., silicone spray or paste wax) to the planer and thicknesser tables to reduce friction and prevent rust.
- Motor and Belt Inspection: Check the motor ventilation openings for obstructions. Inspect drive belts for wear or damage. Replace if necessary.
- Pamariksaan Umum Pangiket: Pariksa sacara berkala sadaya mur, baut, sareng sekrup pikeun pageuhna. Kencengkeun upami diperyogikeun.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin teu ngamimitian. | No power supply; Emergency stop engaged; Thermal overload tripped. | Check power connection; Release emergency stop button; Allow motor to cool down and reset. |
| Poor surface finish (e.g., tear-out, ripples). | Dull or damaged blades; Incorrect depth of cut; Too fast feed rate; Wood grain issues. | Replace or sharpen blades; Reduce depth of cut; Slow down feed rate; Adjust feed direction relative to grain. |
| Wood jams during thicknessing. | Excessive depth of cut; Workpiece too wide/thick; Feed rollers dirty or worn. | Reduce depth of cut; Ensure workpiece dimensions are within limits; Clean feed rollers. |
| Geter kaleuleuwihan atawa noise. | Loose fasteners; Unbalanced blades; Worn bearings. | Check and tighten all fasteners; Ensure blades are correctly installed and balanced; Contact service for bearing replacement. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Scheppach customer support.
Spésifikasi teknis
| Fitur | Spésifikasi |
|---|---|
| Modél | HMS1500 |
| Produsén | Scheppach |
| Sasayogian tanaga | 220-240 V |
| Daya Motor | 2200 Watt |
| Planing Lebar | 260 mm |
| Thicknessing Height | 160 mm |
| Jumlah wilah | 2 |
| Cutter Kepala Speed | 6500 rpm |
| Max. Depth of Cut (Planing) | 3 mm |
| Jointer Table Dimensions | 1040 x 280 mm (Aluminum) |
| Fence Swivel Range | 90-135 ° |
| Bahan Mesin | Cast Iron, Aluminum |
| Item Beurat | 71 kg |
| Warna | Biru |
Garansi sareng Rojongan
Scheppach products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to the following information:
- Garansi: This product is covered by legal guarantees. Please retain your proof of purchase for warranty claims.
- Wangsul: A 30-day return policy may apply, subject to retailer terms and conditions.
- Rojongan Palanggan: For technical assistance, spare parts, or warranty inquiries, please contact Scheppach's specialized customer support. Contact details can typically be found on the Scheppach websitus atanapi dokuméntasi pameseran Anjeun.
