SIHOO L3D Office Chair Instruction Manual

Bubuka

This manual provides detailed instructions for the assembly, operation, and maintenance of your SIHOO L3D Office Chair. Designed for ergonomic support and comfort, this chair features a faux leather finish, adjustable backrest, and seat depth. Please read this manual thoroughly before use to ensure proper setup and to maximize your chair's lifespan and performance.

Émbaran Kasalametan

• Kapasitas Beban Maksimum: Do not exceed the maximum weight recommendation of 300 pounds (136 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Pastikeun sadaya sekrup sareng baut parantos diketatkeun pageuh sateuacan dianggo. Pariksa sacara berkala sareng kencengkeun deui upami diperyogikeun.
• Keep hands and fingers clear of moving parts during adjustment to prevent pinching.
• Paké korsi dina datar, permukaan stabil pikeun nyegah tipping.
• Ulah nangtung dina korsi.

Parentah Majelis

Assembly typically takes approximately 20-40 minutes. All necessary tools and hardware are included. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Ngabongkar komponén: Carefully remove all parts from the packaging. Verify that all components listed in the parts list are present. The hardware (screws, bolts) is typically provided in a blister package with extra pieces.
2. Gantelkeun Casters ka Base: Insert the casters into the holes at the ends of the chair base. Press firmly until they click into place.
3. Pasangkeun Lift Gas ka Base: Place the gas lift cylinder into the center hole of the wheeled base.
4. Pasang Korsi sareng Sandaran: Connect the seat cushion and backrest according to the provided diagrams. Ensure all screws are aligned and tightened securely. Some parts may require careful alignment.
5. Pasang Armrests: Secure the armrests to the seat and backrest assembly using the provided screws.
6. Sambungkeun Rakitan Korsi ka Lift Gas: Sacara ati-ati tempatkeun korsi sareng sandaran anu parantos dirakit kana tabung pengangkat gas.
7. Cék ahir: Pastikeun sadaya sambungan pageuh sareng korsi stabil sateuacan dianggo.

Image: The SIHOO L3D Office Chair, highlighting its design and adjustability.

Parentah Operasi

Nyaluyukeun Backrest

The backrest of the SIHOO L3D chair can be adjusted to three different height levels, providing up to 1.5 inches (approximately 4 cm) of vertical adjustment. To adjust, simply lift the backrest upwards. It will click into place at each level. To lower, lift it past the highest setting, and it will reset to the lowest position.

Adjusting the Seat Depth

Customize your seating experience with the adjustable seat depth, allowing for a maximum adjustment of 1.97 inches (approximately 5 cm). This feature helps you find the perfect fit for your hips and thighs, enhancing comfort and ergonomic support.

Nyaluyukeun Jangkungna Korsi

The seat height can be adjusted to suit various desk heights and user preferences. The seat height ranges from approximately 16.75 inches (42.5 cm) to 19.75 inches (50 cm) at the center front. Use the lever located under the seat to raise or lower the chair. To raise, lift the lever while taking your weight off the seat. To lower, lift the lever while seated.

Fungsi Recline

The chair features a recline function where the backrest can tilt backward. Please note that the recline position is not lockable and will return to an upright position when pressure is released. The recline mechanism offers minimal tension or resistance.

Mobilitas

The chair is equipped with a five-wheel base for easy movement. The casters are designed to roll smoothly on various floor surfaces, including hardwood floors. Avoid lifting the chair by the seat or arms without supporting the base, as the wheeled base may separate.

Pangropéa sareng Perawatan

• Ngabersihan Kulit Faux: The premium faux leather surface is designed to be easy to clean and resists stains, scratches, and peeling. For general cleaning, wipe with a soft, damp lawon. Pikeun noda tougher, make solusi sabun hampang tur usap garing langsung. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive.
• Perawatan pigura: Wipe the metal frame with a soft, dry cloth to remove dust.
• Pangropéa Caster: Pariksa roda sacara berkala pikeun rambut atanapi kokotor anu tiasa ngahalangan gerakan anu lancar. Bersihkeun sakumaha diperyogikeun.
• Pariksa Hardware: Regularly inspect all screws and bolts to ensure they remain tight. Re-tighten any loose hardware to maintain stability and safety.
• Hindarkeun sinar panonpoé langsung: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the chair away from direct sunlight when possible.

Pamérésan masalah

Spésifikasi produk

Garansi sareng Rojongan

For warranty information, technical support, or to inquire about replacement parts, please contact SIHOO customer service directly. Refer to the product packaging or the official SIHOO websitus pikeun detil kontak panganyarna.

SIHOO Official Websitus: Visit the SIHOO Store on Amazon