ComMarker Omni1 5W UV Laser Engraving Machine User Manual

1. Bubuka

The ComMarker Omni1 5W UV Laser Engraving Machine is a versatile and precise tool designed for engraving a wide array of materials. It features a 5-watt UV laser with a 355nm wavelength, ensuring minimal thermal effect and high accuracy. The machine is equipped with an electric lifting column for easy focus adjustment and supports both EZCAD and LightBurn software for flexible operation.

This manual provides essential information for the safe and effective use of your Omni1 UV laser engraver, from initial setup to advanced operation and maintenance.

Fitur konci:

• UV Laser Technology: 355nm wavelength for cold light engraving, preventing material burning.
• Precision luhur: Engraving accuracy of 0.0019mm and marking speed up to 10000mm/s.
• Angkat listrik: One-button control for precise focus adjustment.
• Wide Bahan kasaluyuan: Engraves on PE, PVC, PP, PS, PLA, PC, PMMA, POM, nylon, ABS, aluminum, gold, platinum, silver, titanium, brass, stainless steel, wood, cloth, glass, cardboard, and more.
• Rojongan Sofwér: Compatible with EZCAD 2 and LightBurn.
• Desain kompak: Lightweight at 23.5kg for portability.

2. Setélan

Before operating your ComMarker Omni1, ensure all components are present and correctly assembled. Follow the steps below for a smooth setup process.

2.1. Unboxing and Component Verification

Carefully unpack all items from the packaging. Verify that all components listed below are included:

• 1x 5W UV Laser Engraving Machine (Omni1 Body)
• 1x 70mm x 70mm Lens
• 1x 150mm x 150mm Lens
• 1x Foot Switch
• 1 x Panguasa
• 1x Lifting Platform
• 1x Goggles
• 1x Preview Pembantu
• 2x Placing Helper
• 1 x Allen konci
• 1x USB Driver (includes EZCAD software)
• 1 sét Sekrup
• 1x adaptor kakuatan
• 1 x Kabel Data
• 1x Wire Cable

Figure 2.1: Included components with the ComMarker Omni1 5W UV Laser Engraver.

2.2. Parentah Majelis

Follow the visual guide in the video below for detailed assembly steps.

1. Fasten the Supporting Pole: Secure the supporting pole to the main base unit using the provided four screws and Allen wrench.
2. Place the Laser Head: Carefully place the laser head onto the supporting shelf, ensuring proper alignment with the screw holes. Fasten the four screws to secure it.
3. Connect External Signal Cable: Connect the external signal cable from the laser head to the control console.
4. Sambungkeun Kabel Daya: Connect the power cable for the laser head to the control console.
5. Connect Galvanometer Cable: Attach the cable of the galvanometer to its designated port.
6. Connect Wire Cable: Connect the wire cable with the Control Console.
7. Connect Wire on Supporting Pole: Connect the wire on the supporting pole.
8. Connect Power Adaptor: Plug in the main power adaptor to the machine and a power outlet.
9. Sambungkeun Foot Switch: Connect the foot switch to the 'Pedal' port on the machine.

Catetan: Rotary and Enclosure accessories require separate purchase and connection to their respective ports.

3. Nyuping

This section guides you through the basic operation of the ComMarker Omni1, from powering on to performing your first engraving.

3.1. Power On and Initial Checks

1. Release Emergency Button: Rotate the red emergency stop button to release it.
2. Hurungkeun Daya: Press the main power button to turn on the machine.
3. Saklar laser: Ensure the laser ON/OFF switch button on the laser head is on. The indicator light will alternately flash blue and green. After 1-2 minutes, it will turn solid green, indicating the laser is ready.
4. Remove Lens Lid: Always remove the lens lid before using the machine.

3.2. Nyaluyukeun Panjang Fokus

Accurate focal length is crucial for optimal engraving results. The Omni1 features an electric lifting column for easy adjustment.

1. Place Test Card: Place the provided test card or your material on the engraving platform.
2. Activate Red Light Positioning: Use the dual red light positioning feature to project two red dots onto your material.
3. Adjust Laser Head: Press the up or down buttons on the machine to lift or lower the laser head until the two red light points overlap into a single dot.
4. Verify Focal Length: Use the ruler to check the focal length. The ideal focal length is indicated on the yellow sticker on the laser head (e.g., 333mm). Adjust until the measurement matches.

3.3. Software Installation and Usage (EZCAD & LightBurn)

The ComMarker Omni1 supports both EZCAD and LightBurn software. Install the necessary drivers and software from the provided USB drive.

3.3.1. EZCAD Software Installation

1. Sambungkeun USB Drive: Plug the USB drive into your computer.
2. nyalin Files: Open the USB drive and copy the 'Omni 1' folder to your desktop.
3. Pasang Supir: Right-click 'This PC' (or 'My Computer') and select 'Manage'. Go to 'Device Manager'. Find 'USBBLMCV4' (or 'Unknown Device') under 'Other devices'. Right-click and select 'Update driver'. Choose 'Browse my computer for drivers' and navigate to the 'driver' folder within the 'Omni 1' folder you copied. Click 'Next' to install. Device manager should refresh and display 'BJJJCZ Device'.
4. Open EZCAD: Navigate to the 'software15' folder within 'Omni 1' and double-click 'EZCAD2.exe' to open the software.
5. Load Correction File: In EZCAD, click 'Param (F3)'. Tick 'Use the correction file'. Browse to the 'plug' folder within 'software15' and select 'markcfg7'. Click 'OK'. Calibration is now finished.

3.3.2. LightBurn Software Installation

LightBurn is a powerful third-party software (license purchase needed) compatible with Mac and Windows.

1. Download LightBurn: Visit lightburnsoftware.com and download the appropriate version for your operating system.
2. Install LightBurn: Run the installer and follow the on-screen prompts. Ensure to install the FTDI serial driver and EZCad2 driver (if prompted).
3. Nyetél Alat: In LightBurn, click 'Find My Laser' or 'Create Manually'. Choose 'JCZFiber'. Click 'Next'. Import the EZCad config file ('markcfg7' from the 'plug' folder). Verify the laser type is 'UV/YAG' and set the work area dimensions (e.g., 160mm x 160mm for a 150x150mm lens). Click 'Finish'.
4. Load COR File: In LightBurn, go to 'Device Settings' (wrench icon). Click 'Load COR file' and select 'jcz15.cor' from the 'software15' folder. This calibrates the machine.

3.4. Engraving Examples

The Omni1 UV laser is capable of engraving intricate designs on various materials with high precision and minimal heat impact.

Figure 3.1: Diverse materials engraved by the ComMarker Omni1 UV Laser Engraver.

4. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your ComMarker Omni1 UV Laser Engraving Machine.

4.1. beberesih

• Ngabersihan lensa: Gently clean the lens with a lint-free cloth and lens cleaning solution specifically designed for optical components. Avoid abrasive materials.
• Ngabersihan Platform: Regularly clean the engraving platform to remove dust, debris, and material residue.
• Bersihan Luar: Ngusap bagian luar mesin ku kaén anu lembut sareng garing.

4.2. Kaperawatan Umum

• Kaayaan Lingkungan: Operate the machine in a clean, dust-free environment with stable temperature and humidity.
• Manajemén Kabel: Pastikeun sadaya kabel disusun rapih sareng henteu ditegangan pikeun nyegah karusakan.
• Panyimpenan: When not in use, cover the machine to protect it from dust and potential damage.

5. Cara ngungkulan

This section addresses common issues you might encounter with your ComMarker Omni1 and provides potential solutions.

5.1. Isu umum jeung Solusi

6. Spésifikasi

Detailed technical specifications for the ComMarker Omni1 5W UV Laser Engraving Machine.

7. Garansi

For detailed warranty information regarding your ComMarker Omni1 5W UV Laser Engraving Machine, please refer to the official warranty documentation provided with your product or contact ComMarker customer support directly. Warranty terms and conditions may vary.

8. Rojongan

If you require further assistance, technical support, or have questions not covered in this manual, please contact ComMarker Laser, the official seller.

• Penjual: ComMarker Laser
• Toko Amazon: Visit ComMarker Store on Amazon

For specific inquiries, please refer to the contact information provided on the ComMarker official websitus atanapi dina bungkusan produk anjeun.