isinwheel SK14 Electric Bike for Kids User Manual

1. Bubuka

Thank you for choosing the isinwheel SK14 Electric Bike for Kids. This manual provides essential information for the safe assembly, operation, and maintenance of your electric bike. Please read it thoroughly before use and retain it for future reference.

The isinwheel SK14 is designed as a 2-in-1 electric balance bike, featuring a powerful 250W motor, 14-inch inflatable tires, and a swappable battery. It offers three speed settings (3/6/10 mph) and is equipped with both an electronic brake and a disc brake for reliable stopping power. The adjustable seat ensures comfort for growing children, and the advanced shock absorption system provides a smoother ride on various terrains.

2. Émbaran Kasalametan

PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa maot.

• Salawasna nganggo helm sareng alat kaamanan anu pas (bantal dengkul, bantalan siku) nalika naek.
• Adult supervision is required at all times when a child is operating the electric bike.
• Ensure the rider's age and skill level are appropriate for this product.
• Before each ride, check that all bolts and fasteners are tight, brakes are functioning correctly, and tires are properly inflated.
• Do not ride in traffic, on public roads, or in areas with pedestrians. Use in safe, open environments.
• Avoid riding in wet conditions, on steep inclines, or over large obstacles.
• Tetep leungeun jeung suku jauh ti bagian nu pindah.
• Do not modify the electric bike. Any modifications can compromise safety and void the warranty.
• The maximum weight recommendation for the rider is 154 pounds.

3. Naon dina Box

Carefully unpack all components and check against the list below. If any items are missing or damaged, contact customer support immediately.

• isinwheel SK14 Electric Bike Frame
• Instruksi Manual
• Kartu mérek
• Charger
• Konci Hex
• rengkuh
• As hareup
• Kabayang hareup
• Rear Fender
• Korsi
• Batré

4. Setup jeung Majelis

Assembly is required. Please follow these steps carefully. Tools needed (Hex Key, Wrench) are included.

1. Pasang roda hareup: Attach the front wheel to the fork using the front axle and secure it with the provided nuts and wrench. Ensure the wheel spins freely and is centered.
2. Pasangkeun Stangna: Lebetkeun gagang stang kana tabung garpu teras kencengkeun clamping bolts with the hex key. Ensure the handlebars are straight and secure.
3. Pasang Kursi: Insert the seat post into the frame's seat tube. Adjust the seat height to an appropriate level for the rider, ensuring their feet can comfortably touch the ground. Secure the seat post with the quick-release lever or bolt.
4. Install the Rear Fender: Attach the rear fender to the designated mounting points on the frame.
5. Ngeusi batre: Before first use, fully charge the battery. Refer to the 'Battery Charging' section for detailed instructions.
6. Periksa Tekanan Ban: Ensure both tires are inflated to the recommended pressure (usually found on the tire sidewall).

Illustration of battery installation and removal.

5. Parentah Operasi

5.1 Ngeusi batre

The SK14 features a removable battery for convenient charging.

1. Remove the battery from the bike by pressing the release latch and sliding it out.
2. Sambungkeun carjer ka stop kontak témbok standar.
3. Connect the charger's output plug to the battery's charging port.
4. Lampu indikator dina carjer bakal nembongkeun status ngecas (contona, beureum keur ngecas, héjo keur dicas pinuh).
5. Once fully charged (approximately 5 hours), disconnect the charger from the battery and then from the wall outlet.
6. Reinstall the battery into the bike, ensuring it clicks securely into place.

The removable battery connected to its charger.

5.2 Powering on / Pareum tur Speed ​​Control

1. Daya Hurung: Press the power button on the LED display unit. The display will illuminate, showing battery level and current speed mode.
2. Modeu Laju: The bike has three adjustable speed gears: 3 mph, 6 mph, and 10 mph. Use the buttons on the display unit to switch between these modes according to the rider's skill and environment.
3. Operasi throttle: To engage the motor, press the finger paddle throttle. The bike will accelerate based on the selected speed mode.
4. Pareum listrik: Pencét terus tahan tombol daya nepi ka layar pareum.

The clear LED display shows power and speed information.

5.3 System ngerem

The SK14 is equipped with a dual braking system for enhanced safety: an electronic brake and a disc brake.

• To slow down or stop, gently squeeze the brake lever on the handlebars.
• Practice braking in a safe, open area to familiarize the rider with the bike's stopping distance.

The dual braking system provides reliable stopping power.

5.4 Operasi Lampu Utama

The super bright headlight ensures visibility and safety, especially during evening rides.

• The headlight can be turned on or off using a dedicated button on the display unit or handlebars, if available. Refer to the specific controls on your bike.

The super bright headlight for improved visibility.

6. Pangropéa

Regular maintenance ensures the longevity and safe operation of your isinwheel SK14.

• beberesih: Lap sapédah ku iklanamp cloth after each ride. Avoid using high-pressure water jets directly on electrical components.
• Ban: Regularly check tire pressure and inflate as needed. Inspect tires for wear, punctures, or damage.
• Rem: Periodically check brake lever tension and brake pad wear. Adjust or replace as necessary.
• Perawatan batré: Store the battery in a cool, dry place. If not used for extended periods, charge it every 1-2 months to maintain battery health. Do not expose the battery to extreme temperatures.
• Pengikat: Regularly check all bolts, nuts, and screws to ensure they are tight.
• Inspeksi umum: Inspect the frame, fork, and other components for any signs of damage or wear.

7. Cara ngungkulan

This section addresses common issues you might encounter with your SK14 electric bike.

If you encounter issues not listed here or require further assistance, please contact isinwheel customer service.

8. Spésifikasi

9. Garansi jeung Rojongan

isinwheel provides a 365-day quality assurance for the SK14 Electric Bike. This warranty covers manufacturing defects and issues with the battery or other accessories. In case of a problem, contact customer service for prompt assistance and potential reissue of parts, avoiding lengthy repair processes.

For any questions, concerns, or support needs, please utilize our 24/7/365 customer services online. Refer to the brand card included in your package for contact details or visit the official isinwheel websitus.

10. Produk Langkungview