Bubuka
This manual provides detailed instructions for the safe and efficient operation of your Longer Ray5 20000mW Laser Engraver with Air Assist Kit. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Émbaran Kasalametan
PERHATOSAN: Laser engravers are powerful tools that can cause serious injury if not used correctly. Always follow these safety guidelines:
- Always wear appropriate laser safety goggles when operating the machine.
- Never look directly into the laser beam or at its reflection.
- Ensure the work area is well-ventilated to dissipate fumes and smoke.
- Jauhkeun bahan anu gampang kaduruk tina jalur laser.
- Ulah ninggalkeun mesin unattended salila operasi.
- Pastikeun mesin disimpen dina permukaan anu stabil sareng rata.
- Jauhkeun barudak jeung piaraan ti wewengkon operasi.
- Pegatkeun sambungan kakuatan saméméh ngalakukeun sagala pangropéa atawa pangaluyuan.
- Familiarize diri jeung prosedur shutdown darurat.
Eusi pakét
Pastikeun yén sadaya komponén aya dina bungkusan:
- Longer Ray5 20000mW Laser Engraver Unit
- Pompa Bantuan Udara
- Air Assist Nozzle and Tubing
- Adaptor kakuatan
- Kabel USB
- Kacamata Kasalametan
- Manual pangguna (dokumén ieu)
- Material Samples (may vary)
Image: Air assist kit components including the pump, nozzle, and tubing.
Disetél
- Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan.
- Majelis: Follow the included quick start guide for assembling the main laser engraver frame and attaching the laser module.
- Air Assist Installation:
- Connect the air assist pump to the designated port on the laser module using the provided tubing.
- Ensure the air assist nozzle is securely attached to direct airflow to the engraving/cutting point.
- Sambungan Daya: Connect the power adapter to the engraver and then to a suitable power outlet.
- Sambungan Komputer: Connect the engraver to your computer via USB, or prepare for Wi-Fi/TF card connection.
Image: The Longer Ray5 laser engraver with the air assist pump connected and ready for operation.
Parentah Operasi
1. Parangkat Lunak sareng Konéktivitas
The Longer Ray5 supports various software and connection methods:
- Parangkat Lunak anu cocog: LaserGRBL and LightBurn.
- Sistem Operasi: Supports Windows 7+, MacOS, and Linux.
- Métode Konéksi: Wi-Fi, USB, App, and TF card.
Image: Display showing the Longer Ray5's compatibility with LaserGRBL and LightBurn software, and various connection options including Wi-Fi, USB, App, and TF card across Windows, MacOS, and Linux operating systems.
2. Kamampuh Ngukir jeung Motong
The 20W diode laser offers high-efficiency performance for various materials.
- motong: Capable of cutting up to 25mm of wood and 35mm of acrylic. It can also cut 0.05mm metal.
- Ukiran: Engrave hundreds of colors on metallic steel and a wide range of other materials.
- Bahan: Acrylic, metal, wood, stainless steel, and more.
Image: Illustration demonstrating the 20W diode laser's capability to cut 25mm wood and 35mm acrylic.
Gambar: Examples of engraving capabilities, showcasing over 380 colors on metallic surfaces and other DIY artworks.
Image: A collection of various items demonstrating the versatile material selection for engraving and cutting, including wood, metal, and acrylic.
3. Fungsi Bantuan Udara
The integrated air assist kit significantly improves cutting and engraving quality.
- Enhanced Cutting: The adjustable airflow (10-30L/min) suppresses smoke and dust, preventing laser energy attenuation and ensuring cleaner, smoother edges.
- Reduced Yellowing: Air assist helps prevent charring and yellowing on materials during laser processing, especially for wood and acrylic.
Image: A visual comparison showing the benefits of air assist, resulting in cleaner cuts and reduced processing time (e.g., 12 minutes with air assist vs. 20 minutes without).
4. Operasi Kontinyu
The Longer Ray5 is designed for powerful continuous working capacity, supporting 24/7 continuous engraving. A single computer can control multiple machines.
Image: Depiction of multiple Longer Ray5 machines working simultaneously, illustrating continuous operation and the ability for one computer to control several units.
Pangropéa
Regular maintenance ensures optimal performance and extends the lifespan of your laser engraver.
- Ngabersihan Lensa Laser: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
- Puing jelas: Remove any accumulated dust or debris from the work area and machine components.
- Check Belts and Rails: Inspect drive belts for tension and wear. Keep linear rails clean and lubricated as per manufacturer recommendations.
- Air Assist Filter: If your air assist pump has a filter, clean or replace it regularly to ensure efficient airflow.
- Pembaruan firmware: Pariksa produsén urang websitus pikeun sagala apdet firmware sadia pikeun ngaronjatkeun kinerja atawa nambahkeun fitur.
Pamérésan masalah
Bagian ieu ngabahas masalah umum anu anjeun tingali.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Laser teu némbak | Power not connected, software error, laser module fault. | Check power connections. Verify software settings. Contact support if laser module is suspected faulty. |
| Kualitas ukiran/potongan anu goréng | Incorrect focus, dirty lens, wrong power/speed settings, material issues, no air assist. | Adjust laser focus. Clean the laser lens. Optimize power/speed settings for the material. Ensure air assist is active. |
| Mesin teu nyambung ka komputer | USB cable issue, driver not installed, Wi-Fi configuration error. | Try a different USB port/cable. Install necessary drivers. Reconfigure Wi-Fi connection. |
| Haseup/kebul anu kaleuleuwihi | Insufficient ventilation, air assist not active or weak. | Ensure proper ventilation. Check air assist pump and tubing for blockages. Increase air assist flow. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | RAY5 |
| Daya Kaluaran laser | 20000mW (20W) |
| Jenis laser | Laser dioda |
| Cutting Depth (Wood) | Nepi ka 25mm |
| Cutting Depth (Acrylic) | Nepi ka 35mm |
| Metal Cutting Capability | 0.05 mm |
| Air Assist Flow | 10-30 L/min (Adjustable) |
| Layar cabak | 3.5 inci |
| Konektipitas | Wi-Fi, USB, App, TF Card |
| Software cocog | LaserGRBL, LightBurn |
| Dirojong OS | Windows 7+, MacOS, Linux |
| Produsén | Leuwih lila |
| Tanggal Kahiji Sadia | 1 Agustus 2024 |
Garansi sareng Rojongan
For warranty information and technical support, please refer to the official Longer websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
Sumberdaya Online: Nganjang ka Longer Store on Amazon pikeun émbaran produk tambahan sarta rojongan.