1. Bubuka
This manual provides instructions for the PDP Afterglow Wave Wireless RGB Gaming Controller, designed for use with Nintendo Switch, Switch Lite, Switch - OLED Model, and Nintendo Switch 2 consoles. This controller features customizable RGB LED lighting, built-in motion controls, programmable back buttons, and a long-lasting rechargeable battery for an enhanced gaming experience.
Gambar 1.1: Hareupeun view of the PDP Afterglow Wave Wireless RGB Gaming Controller.
2. Setélan
2.1 Ngecas Awal
Before first use, fully charge the controller. Connect the included USB-A to USB-C cable to the controller's USB-C port and a powered USB port (e.g., Nintendo Switch dock, computer, or USB wall adapter). The LED indicators on the controller will show charging status and turn off when fully charged. A full charge provides up to 20 hours of play time.
Image 2.1: The controller's USB-C port for charging.
2.2 Nyambungkeun ka Nintendo Switch
- Pastikeun konsol Nintendo Switch anjeun diaktipkeun sareng diropéa kana parangkat lunak sistem panganyarna.
- Tina Menu RUMAH, pilih Controllers, tuluy Robah Pakem / Orde.
- Pencét jeung tahan tombol Tombol singkronisasi on the top of the Afterglow Wave controller for a few seconds until the player LEDs begin to flash. The Sync Button is a small circular button located between the shoulder buttons.
- Once the controller pairs, the player LED(s) corresponding to the controller number will remain lit.
- The controller maintains a reliable wireless connection up to 30 feet from the console.
Image 2.2: Wireless connection in use.
3. Parentah Operasi
3.1 Kadali Dasar
The Afterglow Wave controller features standard Nintendo Switch button layouts, including:
- Left Analog Stick / L3 Button: Pikeun gerakan sareng kontrol kaméra.
- D-Pad: Input arah.
- Minus (-) Tombol: Aksés menu dina kaulinan atanapi fungsi sistem.
- Tombol Potret Layar: Ngarekam cuplikan layar.
- Right Analog Stick / R3 Button: Pikeun kadali kaméra atawa aksi husus.
- Tombol A, B, X, Y: Tombol aksi.
- Tombol tambah (+) : Aksés menu dina kaulinan atanapi fungsi sistem.
- Tombol imah: Balik deui ka Menu HOME.
- Tombol L, R, ZL, ZR: Tombol taktak sareng pemicu.
Gambar 3.1: Leuwihview tina tombol-tombol pangontrol.
3.2 Kustomisasi Lampu RGB
The controller features eight customizable RGB LED lighting zones and four pre-set modes. Refer to the quick start guide or the official PDP website for detailed instructions on how to cycle through modes and customize lighting effects.
Image 3.2: Customizable RGB lighting zones.
3.3 Tombol Balik Anu Tiasa Diprogram
The controller includes two programmable quick-action back buttons located on the underside. These buttons can be mapped to replicate other controller functions for quicker responses in gameplay. Consult the quick start guide for instructions on how to program these buttons.
Image 3.3: Programmable back buttons.
3.4 Kontrol Gerakan
The controller has built-in motion controls for immersive gameplay in compatible titles. These controls are automatically active when connected to the Nintendo Switch.
4. Pangropéa
4.1 Ngecas Batré
To maintain optimal battery life, charge the controller regularly. Use the provided USB-A to USB-C cable. Avoid using damaged cables or chargers. Do not expose the controller to extreme temperatures.
4.2 beberesih
Clean the controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Avoid getting moisture into any openings.
4.3 Panyimpenan
Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the battery has a partial charge (around 50%) to help preserve its lifespan.
5. Cara ngungkulan
- Controller teu nyambung: Ensure the controller is charged. Verify the Nintendo Switch is in "Change Grip/Order" mode. Press and hold the Sync button on the controller until LEDs flash. If issues persist, try restarting the Nintendo Switch console.
- Batré teu ngecas: Check the USB-C cable and the power source. Try a different cable or USB port. Ensure the controller's charging port is free of debris.
- Buttons or joysticks unresponsive/drifting: Ensure the controller is fully charged. Try recalibrating the joysticks and motion controls through the Nintendo Switch system settings (System Settings > Controllers and Sensors > Calibrate Control Sticks / Calibrate Gyroscope).
- Lampu RGB teu jalan: Check the controller's manual or PDP support website for instructions on how to activate and cycle through lighting modes. Ensure the controller is powered on.
- hirup batré pondok: Ensure the controller is fully charged before use. Reduce RGB lighting brightness or turn off lighting effects to conserve battery.
6. Spésifikasi
- Jumlah modél: 500-252-BK
- merek: PDP
- Kasaluyuan: Nintendo Switch, Switch Lite, Switch - OLED Model, Nintendo Switch 2
- Konektipitas: Wireless (up to 30-foot range)
- Batré: 1 Lithium Polymer (included), up to 20 hours play time per charge
- Fitur: 8 RGB lighting zones with 4 pre-set modes, 2 programmable back buttons, built-in motion controls, ergonomic design
- ukuran: 6.29 x 2.55 x 5.31 inci
- beurat: 12.63 ons
- Lisensi resmi: Muhun, ku Nintendo
7. Garansi jeung Rojongan
The PDP Afterglow Wave Wireless RGB Gaming Controller is officially licensed by Nintendo. For warranty information, product support, or further assistance, please refer to the documentation included with your product or visit the official PDP websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
