ECHTPower Wireless Controller User Manual

Bubuka

Hatur nuhun pikeun meuliasing the ECHTPower Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS devices. Featuring Hall Effect joysticks for precise control, customizable RGB lighting, programmable back buttons, and adjustable vibration, this manual will guide you through its setup, operation, and maintenance.

Figure 1: ECHTPower Wireless Controller in Classic Gray.

Eusi pakét

• 1 x ECHTPower Wireless Controller (Model: ES01GY)
• 1 x Kabel Ngecas USB-C
• 1 x Manual Pamaké (dokumén ieu)

Layout Controller

Gambar 2: Hareupeun view of the controller showing buttons and joysticks.

• 1. Left Analog Stick: Hall Effect joystick for precise movement.
• 2. D-Pad: Directional pad for navigation.
• 3. Minus (-) Button: Tombol fungsi sistem.
• 4. Screenshot Button: Capture in-game screenshots.
• 5. Home Button: Return to the system home screen.
• 6. Plus (+) Button: Tombol fungsi sistem.
• 7. A/B/X/Y Buttons: Tombol aksi baku.
• 8. Right Analog Stick: Hall Effect joystick for camera control or aiming.
• 9. M Button: Macro programming button.
• 10. Tombol Turbo: Activate/deactivate turbo function.
• 11. L/R Buttons: Kancing taktak.
• 12. ZL/ZR Buttons: Tombol pemicu.
• 13. MR/ML Buttons: Tombol mundur anu tiasa diprogram.
• 14. Port USB-C: Pikeun ngecas sareng sambungan kabel.

Gambar 3: Balik view of the controller highlighting the MR and ML programmable buttons.

Setup sareng Sambungan

Ngecas Controller

Before first use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., console, PC, USB wall adapter). The LED indicators will show charging status and turn off when fully charged. A full charge provides approximately 10-16 hours of continuous gameplay.

Nyambung ka Nintendo Pindah

1. Tina Menu HOME, pilih "Controllers" > "Robah Cepengan/Pesenan".
2. Dina controller, pencét jeung tahan tombol Tombol imah for 3 seconds until the LED indicators start flashing rapidly.
3. Sakali nyambung, LED pamuter anu saluyu dina controller bakal hurung padet.
4. To wake up the Switch console from sleep mode, press the Tombol imah dina controller.

Note: This controller cannot wake up the Switch2 console.

Figure 4: The controller is compatible with Nintendo Switch and other platforms.

Nyambungkeun ka PC (Windows)

• Nirkabel (Bluetooth):
  1. Pastikeun PC Anjeun tos Bluetooth diaktipkeun.
  2. Dina controller, pencét jeung tahan tombol Tombol imah for 3 seconds until the LED indicators flash rapidly.
  3. On your PC, go to Bluetooth settings and select "Add device" or "Add Bluetooth or other device".
  4. Select "Bluetooth" and choose "Pro Controller" or "Wireless Controller" from the list.
  5. Once paired, the LED indicators will stop flashing and remain solid.
• Kabel (USB-C):
  1. Connect the controller to your PC using the USB-C cable.
  2. The controller will be automatically recognized as a gamepad.

Nyambungkeun ka Alat Android/ios

1. Aktipkeun Bluetooth dina alat Android atawa ios Anjeun.
2. Dina controller, pencét jeung tahan tombol Tombol imah for 3 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select "Pro Controller" or "Wireless Controller" to pair.
4. Once paired, the LED indicators will stop flashing and remain solid.

Parentah Operasi

Balé Pangaruh Joysticks

The controller features advanced Hall Effect joysticks, which use magnetic sensors instead of traditional mechanical contacts. This design significantly reduces stick drift, enhances precision, and increases durability compared to conventional joysticks.

Figure 5: Hall Effect joysticks offer enhanced precision and durability.

RGB adjustment cahayana

The analog sticks are equipped with RGB LED lights that can display 9 different colors. You can customize the lighting effects:

• Modeu Warna Tunggal: Pencét jeung tahan tombol Tombol lampu (usually located near the back buttons or on the front face) to cycle through the 9 available colors. Release the button to select your desired color.
• Mode engapan: Terus pencét Tombol lampu to activate breathing mode, where colors gradually change.
• Pareuman Lampu: Pencét jeung tahan tombol Tombol lampu until the lights turn off.

Programmable Back Buttons (MR/ML) and Macro Function

The MR and ML back buttons can be programmed to single buttons or complex macros, providing a competitive edge and reducing hand fatigue.

1. Single Button Assignment:
   1. Pencét éta Tombol M once. The LED indicators will flash slowly.
   2. Press the back button you wish to program (MR or ML). The LED indicators will flash rapidly.
   3. Press the button you want to assign (e.g., A, B, X, Y, L, R, ZL, ZR, D-Pad directions, or analog stick clicks).
   4. Press the back button (MR or ML) again to confirm. The LED indicators will stop flashing.
2. Rékam makro:
   1. Pencét jeung tahan tombol Tombol M for 3 seconds until the LED indicators flash rapidly.
   2. Press the back button you wish to program (MR or ML).
   3. Input the sequence of buttons you want to record (e.g., A, B, X, Y, then release).
   4. Pencét éta Tombol M again to save the macro. The LED indicators will stop flashing.
3. Clear Assignment/Macro:
   1. Pencét éta Tombol M once. The LED indicators will flash slowly.
   2. Press the back button (MR or ML) you want to clear.
   3. Pencét éta Tombol M again. The LED indicators will stop flashing, and the assignment/macro will be cleared.

TURBO Continuous Fire Function

The TURBO function allows for rapid, continuous input of a button press, reducing the need for repeated presses.

1. Activate TURBO: Pencét jeung tahan tombol Tombol Turbo, then press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR). The button will now continuously fire as long as you hold it down.
2. TURBO Hold Mode: To activate continuous fire without holding the button, press the Tombol Turbo, then press the desired action button, and then press the Tombol Turbo again. The button will now continuously fire on its own.
3. Saluyukeun laju TURBO: While in TURBO mode, press and hold the Tombol Turbo sarta mindahkeun éta Right Analog Stick Up/Down to cycle through 3 different speeds (slow, medium, fast).
4. Deactivate TURBO: Pencét jeung tahan tombol Tombol Turbo, then press the action button again. Alternatively, press the Tombol Turbo and the action button twice to deactivate TURBO Hold mode.

Figure 6: The TURBO function simplifies rapid button presses during gameplay.

Adjustment Geter

The controller features 4 levels of vibration intensity to match your preference and game immersion.

• Pikeun nyaluyukeun inténsitas geter, pencét terus tahan tombol Tombol Turbo sarta mindahkeun éta D-Pad Up/Down.
• The vibration intensity will cycle through 4 levels: None, Low, Medium, High.

Figure 7: The controller's vibration motors provide immersive feedback.

6-Axis Gyro Sénsor

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. This feature quickly detects the controller's tilt angle, providing intuitive and responsive gameplay, especially in titles that utilize motion aiming or steering.

Video Demonstrasi

Pangropéa sareng Perawatan

• Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Hindarkeun ngalaan controller ka suhu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
• Do not disassemble the controller. This will void the warranty.
• Nyimpen controller dina tempat anu aman lamun teu dipaké pikeun nyegah karuksakan.
• If the controller will not be used for an extended period, charge it at least once every three months to maintain battery health.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

ECHTPower products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please contact ECHTPower customer support through the retailer's platform or visit the official ECHTPower websitus.

Punten tahan bukti pameseran anjeun pikeun klaim garansi.