Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your iOttie iTap 3 Magnetic Dash & Windshield Mount Car Phone Holder. Please read these instructions carefully before use to ensure optimal performance and safety.
Produk Leuwihview
The iOttie iTap 3 is a magnetic phone holder designed for secure mounting on vehicle dashboards and windshields. It features strong N52 magnets for a firm grip and a versatile design for adjustable viewing angles. The mount is compatible with MagSafe devices and includes a magnetic ring adapter for universal compatibility with other smartphones.
Image: The iOttie iTap 3 Magnetic Dash & Windshield Mount, shown with a smartphone magnetically attached and the included magnetic ring adapter.
Naon dina Box
- iTap 3 Magnetic Mount
- Dash/Windshield Mounting Base
- Cingcin adaptor magnét
- Panungtun Alignment
- Pad Padan
Setup sareng Instalasi
Pilihan Pamasangan
The iTap 3 offers two primary installation methods: dashboard or windshield mounting. The super strong, reusable suction cup base provides a secure hold. For optimal adhesion, ensure the surface is clean and dry.
Image: Illustration of suitable dashboard mounting surfaces and unsuitable surfaces like leather or curved dashboards.
penting: If your vehicle has a curved or leather dashboard, mount the product on the windshield for best results. The dashboard pad is intended for flat, hard plastic surfaces.
Magnetic Ring Adapter Installation (for non-MagSafe devices)
For smartphones without MagSafe compatibility, use the included magnetic ring adapter. This adapter attaches to the back of your phone or phone case to enable magnetic mounting.
- Clean the back of your phone or phone case thoroughly.
- Use the alignment guide to determine the optimal placement for the magnetic ring adapter on your device.
- Peel off the adhesive backing from the magnetic ring adapter.
- Carefully apply the adapter to the designated area on your phone or case, ensuring it is on the outermost part and not underneath any layers that would obstruct its magnetic function. Press firmly for 30 seconds.
Image: Visual guide for attaching the magnetic ring adapter to the back of a phone or phone case, emphasizing correct external placement.
Dashboard Pad Installation (Optional)
If mounting on a dashboard, the included dashboard pad can provide a smoother, more secure surface for the suction cup.
- Clean the desired dashboard area thoroughly with an alcohol wipe and allow it to dry completely.
- Peel off the protective film from the dashboard pad.
- Press the dashboard pad firmly onto the cleaned dashboard surface for 30 seconds. Allow 24 hours for the adhesive to cure before attaching the mount.
Image: A hand cleaning a car dashboard surface, preparing for mount installation.
Image: Hands applying the adhesive dashboard pad to a car dashboard.
Ngalampirkeun Gunung
- Ensure the suction cup and mounting surface (dashboard pad or windshield) are clean.
- Place the suction cup firmly against the surface.
- Press down the locking lever on the base of the mount to create a vacuum seal.
Image: Hands demonstrating the attachment of the iOttie iTap 3 mount to a dashboard pad by pressing down the locking lever.
Operasi
Attaching Your Device
Once the mount is securely installed, simply place your MagSafe-compatible phone or phone with the magnetic ring adapter onto the magnetic face of the mount. The powerful N52 magnets will securely hold your device.
Nyaluyukeun Viewdina Angle
The iTap 3 features a telescopic arm and a ball joint for flexible positioning:
- Panangan Teleskopik: The arm extends from 4 inches to 6.75 inches and pivots on a 260-degree arc. Loosen the knob on the arm to adjust its length and angle, then tighten to secure.
- Ball Joint: The magnetic face is connected via a ball joint, allowing for 360-degree rotation and tilting. This enables easy switching between landscape and portrait modes and finding your preferred viewsudut ing.
Image: A diagram illustrating the extension and 260-degree pivot range of the mount's telescopic arm.
Image: A smartphone mounted on the iOttie iTap 3, demonstrating the flexibility of the ball joint for various viewdina sudut.
Pangropéa
To maintain the strong suction of the mount, periodically clean the suction cup with warm water and air dry. Do not use harsh chemicals or abrasive materials, as this may damage the suction cup or the mount's finish.
Pamérésan masalah
| Masalah | Solusi anu mungkin |
|---|---|
| Mount not sticking to dashboard/windshield. | Ensure surface is clean, dry, and flat. Clean suction cup with warm water and air dry. If dashboard is curved or textured, use windshield mounting. Allow dashboard pad to cure for 24 hours if used. |
| Telepon teu dicekel pageuh. | Verify the magnetic ring adapter is correctly installed on the outermost part of your phone/case. Ensure no obstructions between phone and mount. For MagSafe devices, ensure case is MagSafe compatible. |
| Mount feels loose after adjustment. | Tighten the adjustment knob on the telescopic arm and the ball joint connection firmly after positioning. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Dimensi produk | 5.3 x 2.53 x 2.7 inci |
| Item Beurat | 4.5 ons |
| Nomer modél | ITMNCG |
| Fitur husus | Adjustable, Non-Slip, Tilt Head |
| Alat nu cocog | Smartphones (MagSafe, Qi2, and others with adapter) |
| Tipe Pamasangan | Dasbor, Kaca hareup |
Garansi sareng Rojongan
iOttie products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official iOttie website. For technical support or further assistance, please contact iOttie customer service through their official channels.
Anjeun tiasa mendakan langkung seueur inpormasi sareng dukungan dina iOttie Store on Amazon.
