Bubuka
The TECKNET Door & Window Alarm system provides enhanced security for your home, office, or other properties. Designed for easy installation and versatile application, these alarms offer immediate alerts upon unauthorized entry through doors or windows. Featuring adjustable volume levels and multiple operating modes, the system is adaptable to various security needs.
Figure 1: TECKNET Door & Window Alarms (9-Pack)
Fitur konci
- 2-in-1 Alarm & Chime Modes: Choose between a loud alarm for security breaches or a gentle chime for entry/exit notifications.
- 3-Tingkat Kontrol Volume: Adjust the alarm/chime volume to suit your environment and preference.
- Nirkabel & Pamasangan Gampang: Self-adhesive backing allows for quick and tool-free setup on various surfaces.
- Desain kompak & portabel: Small size makes it ideal for home, hotel, RVs, sheds, and more.
- Magnetic Sensor Activation: Triggers when the main unit and magnetic sensor are separated by more than 0.78 inches.
Figure 2: Alarm Components and Controls
Guide Setup
1. Pamasangan batré
The alarms come with batteries pre-installed. Before use, ensure the alarm is in the 'OFF' position to prevent accidental activation. Remove the battery insulating tab from the main alarm unit.
2. Persiapan beungeut
Clean the installation area thoroughly to ensure optimal adhesion of the self-adhesive pads. The surface should be dry and free of dust or grease.
Gambar 3: Léngkah-léngkah Pamasangan anu Gampang
3. Mounting the Alarm Units
- Peel off the protective film from the 3M adhesive pads on the back of both the main alarm unit and the magnetic sensor.
- Attach the main alarm unit to the door or window frame.
- Align and attach the magnetic sensor to the door or window itself, ensuring it is within 0.78 inches (approximately 2 cm) of the main unit when the door/window is closed. The arrow on the main unit should point towards the magnetic sensor.
- Press firmly for a few seconds to secure both parts.
Figure 4: Critical Mounting Distance for Proper Function
Catetan penting:
- The alarm will only function correctly if the main unit and magnetic sensor are within the specified distance when the door/window is closed.
- Ensure the installation area is clean and the sensor is installed within 0.5 inches from the arrow side of the alarm.
Parentah Operasi
1. Powering on / Pareum
Locate the ON/OFF switch on the side of the main alarm unit. Slide the switch to the 'ON' position to activate the alarm, and to 'OFF' to deactivate it.
2. Mode Selection (Alarm/Chime)
The alarm unit features a 2-in-1 function. Use the mode switch to select between:
- Mode Alarm: Produces a loud, continuous siren when triggered. Ideal for security.
- Modeu hurung: Produces a short, pleasant sound (like a doorbell) when triggered. Useful for monitoring entry/exit without a full alarm.
3. Volume Control
Adjust the volume using the 3-level volume switch on the side of the main unit. Select the desired loudness based on your environment and needs.
Figure 5: Alarm and Chime Modes with Volume Settings
4. Triggering the Alarm/Chime
When the main alarm unit and the magnetic sensor are separated (e.g., a door or window is opened), the alarm or chime will activate based on the selected mode. The LED light on the main unit will also illuminate.
Video 1: Demonstration of TECKNET Door & Window Alarm functionality, including sound and activation.
Pangropéa
1. Ngagantian batré
If the alarm's sound becomes weak or it stops functioning, the batteries may need replacement. To replace batteries:
- Ensure the alarm is in the 'OFF' position.
- Carefully slide the main alarm unit upwards off its mounting plate. The mounting plate will remain attached to the door/window frame.
- Unscrew the small screw on the back of the main unit to access the battery compartment.
- Replace the old LR44 batteries with new ones, ensuring correct polarity.
- Secure the battery compartment cover and slide the unit back onto its mounting plate.
2. beberesih
Wipe the alarm units periodically with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
3. Adhesion Check
Periodically check the adhesion of both units to ensure they are securely attached to the surface. Reapply new adhesive pads if necessary.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alarm not activating. | Alarm is in 'OFF' mode. | Slide the switch to 'Alarm' or 'Chime' mode. |
| Alarm not activating. | Batré lemah atawa béak. | Ganti batré LR44. |
| Alarm not activating. | Magnetic sensor is not properly aligned or too far from the main unit. | Ensure the magnetic sensor is within 0.78 inches of the main unit and aligned with the arrow. |
| Sora alarm lemah. | batré lemah. | Ganti batré LR44. |
| Alarm hurung teu disangka-sangka. | Magnetic sensor is too far from the main unit, or units are not securely mounted. | Re-align the magnetic sensor or re-secure the units with new adhesive. |
spésifikasi
- model: TK-WA901
- Sumber Daya: Battery Powered (LR44 x 4 per unit)
- Ukuran (Unit Utama): Kira-kira 3.93 x 1.37 x 0.69 inci
- Dimensions (Magnetic Sensor): Kira-kira 1.57 x 0.39 inci
- Activation Gap: Less than 0.78 inches (2 cm)
- Tingkat volume: 3 (Henteu, Sedeng, Luhur)
- Modeu: Alarm, Chime, Off
- warna: Bodas
Garansi & Rojongan
TECKNET nawiskeun 36-Bulan jaminan for registered products. If you encounter any problems in using the product, please feel free to contact our professional customer service team for assistance.
Kanggo dukungan, mangga buka situs resmi TECKNET websitus atanapi tingal inpormasi kontak anu disayogikeun dina bungkusan produk anjeun.
