Manual Pamaké Mesin Ukiran Laser SCULPFUN S9

1. Bubuka

The SCULPFUN S9 is a high-performance laser engraving and cutting machine designed for precision work on various materials. Featuring advanced laser beam shaping technology, it offers powerful cutting capabilities comparable to 90W CO2 lasers, along with ultra-fine engraving precision. This manual provides essential information for the safe and effective operation of your SCULPFUN S9 machine.

Figure 1: SCULPFUN S9 Laser Engraving Machine.

2. Émbaran Kasalametan

Operating a laser engraving machine requires strict adherence to safety guidelines to prevent injury. Please read and understand all safety warnings before use.

• Perlindungan panon: The laser filter cover blocks 98% of UV light, allowing observation without protective glasses. However, always exercise caution. Ensure no pets or unauthorized individuals are exposed to the laser point.
• Stopan Darurat: The machine is equipped with a power switch for immediate shutdown in emergencies. Familiarize yourself with its location.
• Perlindungan permukaan: Use the provided A4-sized steel pad to protect your work surface from laser damage and reduce fire risks.
• Ventilasi: Operate the machine in a well-ventilated area to disperse fumes and particles generated during engraving and cutting.
• Bahan anu gampang kaduruk: Avoid operating near highly flammable materials. Always monitor the machine during operation.

Figure 2: Laser filter cover for eye protection.

Figure 3: A4 metal pad for surface protection.

3. Setup jeung Majelis

3.1 Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian assembly:

• 1 x X-axis component
• 2 x X profiles
• 2 x Y profiles
• 1 x Control box component
• 3 x Ngadukung suku
• 1 x Laser component
• 1 x 12V 5A Power adapter
• 1 x Kabel Daya
• 1 x kabel USB
• 1 x Assembly kit with screws for steps 1-5
• 2 x Belts
• 1 x M5 T-type hexagonal screwdriver
• 1 x M4 L-type hexagonal screwdriver
• 1 x M3 L-type hexagonal screwdriver
• 1 x 8-10 mm Screw wrench
• 10 x ikatan

Gambar 4: Leuwihview tina komponén anu kalebet.

3.2 Parentah Majelis

The SCULPFUN S9 features an all-metal structure designed for robustness and stability. Assembly is straightforward and typically takes 10 to 20 minutes. Follow the detailed instructions provided in the included assembly guide (not part of this digital manual) for step-by-step installation. Ensure all screws are tightened securely for optimal performance and safety.

Reserved fixing holes are present on the four feet and the body for securing the machine and data cable, enhancing stability during operation.

Figure 5: Close-up of the robust metal frame.

4. Parentah Operasi

4.1 Kasaluyuan Software

The SCULPFUN S9 is compatible with a wide range of mature engraving software:

• LaserGRBL
• LightBurn (supports Windows and Apple systems)
• Benbox
• GrblController
• LiteFire

It supports PWM mode engraving.

Figure 6: Compatible software and operating systems.

4.2 Dirojong File Formulir

The machine supports various engraving file formats, including:

• JPG
• PNG
• DXF
• SVG
• G-kode
• NC
• BMP
• TIF
• PDF
• AI

4.3 Engraving and Cutting Capabilities

The S9 utilizes the latest 5.5W diode laser beam shaping technology, resulting in an ultra-fine compressed laser focus spot of 0.06*0.06 mm and an engraving accuracy of 0.01 mm. This provides superior penetration and cutting precision.

• motong: Capable of cutting wood up to 15mm thick, 10mm acrylic, and 10mm plywood.
• Ukiran: Suitable for engraving ceramics and stainless steel, among other materials.

Gambar 7: Kelamples of cutting capabilities (15mm wood, 10mm acrylic).

Figure 8: Demonstration of 0.06mm ultra-fine laser focus for high-precision engraving.

Gambar 9: Kelamples of materials suitable for engraving, including wood, cardboard, leather, and ceramics.

Gambar 10: Kelamples of materials suitable for cutting, including wood, acrylic, cardboard, fabric, bamboo, and plastic sheets.

4.4 adjustment fokus

The laser module features a fixed focus design with an easy sliding mechanism for height adjustment. Refer to the assembly guide for precise focusing instructions to achieve optimal engraving and cutting results.

Figure 11: Fixed focus and sliding design for easy height adjustment.

4.5 Expandable Engraving Area

The SCULPFUN S9's structure uses standard 2020 V-slot anodized aluminum, allowing for easy expansion of the engraving area. You can purchase the SCULPFUN extension kit to enlarge the working area up to 400x950 mm (37.4"x16.14"), which is beneficial for larger projects.

Figure 12: Illustration of the expandable working area from 420x410mm to 950x410mm.

5. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.

• Ngabersihan lensa: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
• Pelumasan Rel: Oleskeun saeutik pelumas kana rel pituduh pikeun mastikeun gerakan modul laser anu lancar.
• Ngaleungitkeun puing: Regularly remove dust and debris from the machine, especially around the laser module and ventilation areas, to prevent overheating and obstruction.
• Tegangan sabuk: Check the tension of the drive belts periodically. Adjust if they are too loose or too tight to ensure accurate movement.

6. Cara ngungkulan

This section addresses common issues you might encounter with your SCULPFUN S9.

If you encounter issues not listed here, please refer to the official SCULPFUN support resources or contact customer service.

7. Spésifikasi

8. Garansi jeung Rojongan

The SCULPFUN S9 machine comes with a one-year warranty. For any inquiries or support needs, please contact SCULPFUN customer service. They aim to provide attentive service and quick responses within 12 hours.

For further assistance, you may visit the official SCULPFUN store on Amazon: SCULPFUN Store.