1. Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Juno 2-Inch Flat Trim Canless Wafer LED Downlight. This innovative lighting solution is designed for quick and easy installation in various ceiling spaces, eliminating the need for traditional recessed housings. It features an all-in-one design with switchable white color temperature and adjustable lumen output, offering versatile lighting for accent, task, or general illumination.
Figure 1: Juno 2-Inch Flat Trim Canless Wafer LED Downlight with its remote driver box.
2. Émbaran Kasalametan
Mangga baca sadaya pitunjuk sacara saksama sateuacan dipasang sareng simpen manual ieu kanggo rujukan ka hareup. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi bahaya sanésna.
- Pareuman heula daya dina pemutus sirkuit sateuacan ngamimitian pamasangan atanapi ngalaksanakeun pangropéa naon waé.
- Sadaya sambungan listrik kedah saluyu sareng standar Kode Listrik lokal sareng Nasional (NEC). Upami anjeun teu wawuh sareng sambungan kabel listrik anu leres, konsultasi ka tukang listrik anu mumpuni.
- Ulah ngarobah atawa ngarobah produk sagala cara.
- Mastikeun suplai voltage cocog sareng fixture (120 Volt).
- This product is suitable for wet locations and is IC Rated for direct contact with insulation.
- Do not install damaged products. Inspect the product upon receipt.
3. Eusi Paket
Pariksa yén sadaya komponén aya sareng henteu ruksak sateuacan neraskeun pamasangan:
- LED Lens (Integrated with Downlight Fixture)
- Mounting Hardware (Spring clips, remote driver box)
Note: The downlight fixture and remote driver box are typically pre-assembled or connected.
4. Fitur
The Juno 2-Inch Flat Trim Canless Wafer LED Downlight offers advanced features for optimal lighting performance and ease of use:
- Canless Design: No housing required, allowing installation directly into ceiling drywall.
- Switchable White Color Temperature (SWW5): Easily select from five color temperature options:
- 2700K Bodas Lemes
- 3000K Haneut Bodas
- 3500K nétral Bodas
- 4000K Cool Bodas
- 5000K Beurang
- Adjustable Lumen Output (ALO25): Choose from three brightness levels (Low, Medium, High) to suit your needs.
- Dimmable: Compatible with most standard TRIAC dimmers, dimming down to 10 percent.
- Énergi Éfisién: Long-life LEDs and a high-efficiency driver ensure superior illumination and extended service life.
- IC dipeunteun: Approved for direct contact with insulation, simplifying installation in insulated ceilings.
- Wet Location Certified: Suitable for use in bathrooms, showers, and outdoor covered areas.
Figure 2: Switches on the remote driver box allow selection of color temperature and lumen output.
Figure 3: Visual guide to the different color temperatures available.
5. Setup jeung Instalasi
The canless design simplifies installation. Follow these steps for a secure and proper setup:
- Pareuman Daya: Sateuacan ngamimitian, pastikeun listrik ka area pamasangan dipareuman dina pemutus sirkuit.
- Nyiapkeun bubuka: Cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the ceiling space.
- Sambungkeun Wiring:
- Open the remote driver box.
- Connect the building's supply wires (hot, neutral, ground) to the corresponding wires in the driver box using appropriate wire connectors.
- Pastikeun sadaya sambungan aman sareng insulated leres.
- Close the driver box cover.
Figure 4: The remote driver box houses the electrical connections and adjustment switches.
- Select Settings (Pre-Installation): Before inserting the downlight into the ceiling, use the switches on the remote driver box to select your desired color temperature (2700K-5000K) and lumen output (Low, Medium, High). These settings can be adjusted later if needed, but it's easier before final installation.
- Insert Driver Box: Place the remote driver box into the ceiling opening. Its slim design allows it to fit into tight spaces.
- Pasang Downlight:
- Gently push the spring-loaded clips on the sides of the downlight upwards.
- Insert the downlight into the ceiling opening.
- Once the downlight is fully inserted, release the clips. The clips will spring back down and firmly secure the fixture against the ceiling.
Figure 5: Dimensions of the downlight and driver box for installation planning.
- Mulangkeun Daya: Turn the power back on at the circuit breaker. Test the downlight's functionality.
6. Parentah Operasi
Your Juno LED Downlight is designed for simple operation once installed.
- Hurungkeun/Pareuman: Ngadalikeun lampu maké switch témbok baku disambungkeun ka sirkuit.
- Dimming: If connected to a compatible TRIAC dimmer switch, adjust the brightness by manipulating the dimmer control. The light can be dimmed down to 10% of its maximum output.
- Adjusting Color Temperature and Lumen Output:
The color temperature and lumen output are set via switches located on the remote driver box (refer to Figure 2). To change these settings after installation, you will need to access the driver box, which may require temporarily removing the fixture from the ceiling or accessing the box through an attic/access panel if it was placed there. It is recommended to set these preferences during installation.
- Saklar Suhu Warna: Select from 2700K, 3000K, 3500K, 4000K, or 5000K.
- Lumen Output Switch: Choose Low, Medium, or High brightness.
7. Pangropéa
The Juno LED Downlight requires minimal maintenance due to its durable design and long-life LEDs.
- beberesih: Pastikeun kakuatan pareum sateuacan beberesih. Ngusap alatna ku lemes, garing, atawa rada damp lawon. Ulah make cleaners abrasive atawa pangleyur, sabab bisa ngaruksak finish atawa komponén listrik.
- Umur LED: The integrated LEDs are designed for extended operation and do not require replacement under normal use.
8. Cara ngungkulan
Upami anjeun ngalaman masalah sareng downlight anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Taya kakuatan pikeun fixture nu. Sambungan kabel leupas. Faulty switch or circuit breaker. | Pariksa circuit breaker jeung switch témbok. Turn off power, check all wire connections in the driver box. Test switch or breaker; replace if necessary. |
| Lampu kedip-kedip atanapi redup teu leres. | switch dimmer sauyunan. kabel leupas. sirkuit overloaded. | Ensure dimmer is TRIAC compatible and designed for LED lighting. Pareuman kakuatan, pariksa sadaya sambungan kabel. Kurangi beban dina sirkuit atanapi konsultasi ka tukang listrik. |
| Suhu warna atanapi kacaangan anu teu leres. | Switches on driver box set incorrectly. | Access the remote driver box and adjust the color temperature and lumen output switches to desired settings. |
Upami masalahna tetep saatos nyobian solusi ieu, hubungi dukungan palanggan.
9. Spésifikasi
| Atribut | Rincian |
|---|---|
| merek | Juno |
| Ngaran modél | WF2 RD ALO25 SWW5 90CRI 120 MW M6 (Round LED) |
| Ukuran | 2-Inch Flat Trim |
| Warna | Matte Bodas |
| Bahan | Aluminium, Polycarbonate |
| Tipe Sumber Cahaya | LED |
| Voltage | 120 volt |
| Wattage | 9.2 watt |
| Fitur husus | Adjustable Color Temperature (2700K-5000K), Dimmable (Triac), Energy Efficient, Waterproof |
| Tipe Pamasangan | Flush Mount (Canless) |
| Pamakéan jero rohangan / outdoor | Indoor, Outdoor (Wet Location Certified) |
| Dimensi produk | 3.2"L x 3.2"W x 1.3"H (Fixture) |
| Item Beurat | 13.2 ons |
| Sertifikasi | CSA certified, Title 24, Energy Star, IC Rated |
10. Garansi jeung Rojongan
Garansi: This product comes with a Limited Warranty. Please refer to the product packaging or the manufacturer's official website for specific terms and conditions of the warranty.
Rojongan Palanggan: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Juno customer support. Contact information can typically be found on the product packaging or the official Juno websitus.
Sumberdaya Online: For additional information, product updates, or FAQs, visit the official Juno websitus: www.acuitybrands.com/brands/juno
