Geeni Smart Water Alarm Leak Detector with Siren - User Manual

Bubuka

The Geeni Smart Water Alarm Leak Detector with Siren is designed to provide early warning of water leaks in your home. This device helps prevent potential water damage by detecting leaks and alerting you through its built-in siren and mobile application. It integrates with your home Wi-Fi network for remote monitoring and smart home automation.

Fitur konci

• Instant Leak Detection: Rapidly identifies the presence of water.
• Tanda Real-Time: Sends immediate notifications to your smartphone.
• Built-in 80dB Alarm: Emits a loud siren to alert occupants.
• Monitor from Anywhere: Access device status and alerts remotely via the Geeni app.
• Integrasi Smart Home: Compatible with other Geeni smart home products for automated responses.
• Waspada Batré Lemah: Ngabéjaan anjeun nalika batréna kedah diganti.
• Setélan Gampang: Dirancang pikeun instalasi anu gancang sareng gampang.
• 24/7 Peace of Mind: Continuous monitoring for enhanced home safety.

Figure 1: Key features of the Geeni Smart Water Alarm Leak Detector.

Eusi pakét

Pastikeun yén sadaya item aya dina bungkusan:

• 1x Geeni Smart Water Sensor
• 1x Siren Mounting Adhesive
• 1 x Manual Pamaké
• 2 x Batré AAA

Gambar 2: Eusi anu kalebet dina pakét produk.

Produk Leuwihview

Familiarize yourself with the components of your Geeni Smart Water Alarm Leak Detector:

• Lampu LED: Indicates device status (e.g., pairing mode, leak detected).
• Set Key: Used for pairing and resetting the device.
• Speaker: Emits the 80dB siren alarm.
• Probe Sénsor: The part that detects water. Must be placed flat on the surface where leaks may occur.
• Kompartemen batré: Holds 2x AAA batteries.
• Panjang kabel: The sensor probe is connected to the main unit by a 3.28 ft (1 m) cable.

Gambar 3: Hareup jeung tukang view of the device with labeled components and dimensions.

Disetél

1. Masang Batre

1. Buka kompartemen batré di tukang unit utama.
2. Insert 2x AAA batteries, ensuring correct polarity.
3. Tutup kompartemen batré anu aman.

2. Download and Install the Geeni App

• Milarian pikeun "Geeni" in the Apple App Store or Google Play Store.
• Unduh sareng pasang aplikasina.
• Ngadaptarkeun akun anyar atanapi log in upami anjeun parantos gaduh.

3. Pair the Device with Wi-Fi

1. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The device does not support 5 GHz networks.
2. Open the Geeni app and tap the "+" icon to add a new device.
3. Follow the on-screen instructions in the app to put the water sensor into pairing mode and connect it to your Wi-Fi network. The LED light on the device will indicate its pairing status.

4. Nempatkeun alat

Strategically place the water sensor in areas prone to leaks:

• Di handapeun wastafel (dapur, kamar mandi)
• In basements
• Caket pemanas cai
• In laundry rooms
• Behind dishwashers or refrigerators

Use the provided mounting adhesive to secure the main unit. Ensure the sensor probe lies flat on the surface where water might accumulate first.

Gambar 4: Kelamples of multi-use placement for the water sensor.

Operasi

Leak Detection and Alerts

Once installed and connected, the Geeni Smart Water Alarm continuously monitors for water. When the sensor probe detects water:

• The device will emit a loud 80-decibel siren.
• You will receive an immediate notification on your smartphone via the Geeni app.

Figure 5: Real-time leak detection and app notification.

Nyaluyukeun Setélan Alarm

You can customize the alarm settings through the Geeni app:

• Volume Sirineu: Adjust the volume from mute (0dB) up to 80dB.
• Durasi Alarm: Set the duration of the siren from 30 seconds to 180 seconds.

Figure 6: Alarm volume and duration adjustment options.

Pangropéa

Ngagantian batré

The device is powered by 2x AAA batteries with an expected lifespan of 3-4 months. The Geeni app will send a low battery alert when replacement is needed.

1. When a low battery alert is received, open the battery compartment.
2. Remove the old batteries and insert two new AAA batteries, observing correct polarity.
3. Tutup kompartemen batré.

Nguji Alat

It is recommended to periodically test the water sensor to ensure it is functioning correctly:

1. Place a small amount of water (e.g., a few drops) onto the sensor probe.
2. Verify that the siren sounds and you receive a notification on your smartphone.
3. Dry the sensor probe thoroughly after testing.

Pamérésan masalah

• Alat teu nyambung ka Wi-Fi:
  Ensure your Wi-Fi network is 2.4 GHz. The device does not support 5 GHz. Try moving the device closer to your Wi-Fi router. If issues persist, try deleting the device from the Geeni app and re-pairing it following the setup instructions.
• Henteu aya bewara aplikasi:
  Check your smartphone's notification settings for the Geeni app to ensure notifications are enabled. Also, verify that the device is properly connected to Wi-Fi and has sufficient battery power.
• Siren not sounding or too quiet:
  Check the battery level. Ensure the siren volume is not set to mute in the Geeni app settings.
• Sensor not detecting water:
  Ensure the sensor probe is lying flat and making good contact with the surface where water might collect. Clean the sensor contacts if they appear dirty.
• Device appears offline in app:
  Check your Wi-Fi connection. If the Wi-Fi network is down or unstable, the device may appear offline. Replace batteries if they are low.

For further assistance, refer to the support section within the Geeni app or visit support.mygeeni.com.

spésifikasi

Garansi sareng Rojongan

Émbaran jaminan

This Geeni product comes with a 1-taun jaminan kawates ti tanggal beuli. Punten tahan bukti pameseran anjeun pikeun klaim garansi. Garansi nyertakeun defects dina bahan jeung workmanship dina pamakéan normal.

Rojongan Palanggan

If you encounter any issues or have questions regarding your Geeni Smart Water Alarm Leak Detector, please contact Geeni customer support:

• Dukungan Online: Nganjang support.mygeeni.com
• Rojongan In-App: Access support directly through the Geeni mobile application.