Bubuka
Thank you for choosing the Bontempi PlayPodsPro LED Wireless Headphones, Model 48 3010. These headphones are designed to provide an immersive listening experience with advanced features such as Active Noise Cancellation (ANC/ENC) and Bluetooth connectivity. This manual will guide you through the setup, operation, and maintenance of your new headphones to ensure optimal performance.
Image: Bontempi PlayPodsPro LED Wireless Headphones, unfolded and ready for use, with the product packaging visible in the background. This image illustrates the product's design and presentation.
Eusi pakét
Mangga parios pakét kanggo barang-barang ieu:
- Bontempi PlayPodsPro LED Wireless Headphones (Model 48 3010)
- Kabel Ngecas USB
- Manual pangguna (dokumén ieu)
Image: The retail packaging for the Bontempi PlayPodsPro LED Wireless Headphones. The box highlights key features such as ANC, Bluetooth compatibility, folding design, and USB charging.
Disetél
1. Ngecas Headphone
- Panggihan port ngecas USB dina headphone.
- Connect the included USB charging cable to the headphones.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator on the headphones will illuminate during charging and change color or turn off when fully charged.
- Antosan sakitar 2-3 jam kanggo ngecas pinuh sateuacan dianggo anu munggaran.
2. Powering on / Pareum
- Pikeun Ngahurungkeun: Press and hold the Power button (often marked with a ⑂ symbol) for approximately 3-5 seconds until the LED indicator lights up and you hear an audible prompt.
- Pikeun mareuman: Press and hold the Power button for approximately 3-5 seconds until the LED indicator turns off and you hear an audible prompt.
3. Papasangan Bluetooth
To connect your headphones to a Bluetooth-enabled device (smartphone, tablet, MP3 player):
- Pastikeun headphone tos dicas pinuh sareng pareum.
- Press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes rapidly (usually blue and red), indicating pairing mode.
- Dina alat anjeun, aktipkeun Bluetooth sareng milarian alat anu sayogi.
- Select "Bontempi 48 3010" or "PlayPodsPro LED" from the list of found devices.
- Once connected, the LED indicator on the headphones will typically show a solid blue light or flash slowly, and you will hear a confirmation tone.
- Upami dipenta pikeun kecap akses, lebetkeun "0000".
Image: The Bontempi PlayPodsPro LED Wireless Headphones in a folded position, clearly displaying the control buttons on the earcup, including power, volume, track control, and LED functions. This view is useful for identifying charging ports and control layout.
Ngoperasikeun Headphone
Kadali Langkungview
The main controls are located on the earcup. Refer to the image in the Setup section for visual identification.
- Tombol Daya (⑂): Press and hold to power on/off. Short press for Play/Pause during music playback or to Answer/End calls.
- Volume Up (VOL+ / ▶▶|): Pencét pondok pikeun ningkatkeun volume. Pencét lila pikeun skip ka lagu salajengna.
- Volume Down (VOL- / |◀◀): Pencét pondok pikeun ngirangan volume. Pencét lila pikeun skip ka lagu saméméhna.
- Tombol LED: Activates or changes the LED light patterns.
Aktif Noise pembatalan (ANC)
The PlayPodsPro LED headphones feature Active Noise Cancellation (ANC) to reduce ambient noise.
- To Activate ANC: Locate the dedicated ANC switch or button (if present, otherwise it might be integrated with the power button or another control). Press or slide it to activate ANC.
- To Deactivate ANC: Press or slide the ANC control again.
- A specific LED indicator or audible prompt may confirm ANC status.
Puterkeun Musik
- Puter / Reureuh: Pencét pondok tombol Daya.
- Lagu salajengna: Long press the Volume Up (VOL+) button.
- Lagu Sateuacanna: Long press the Volume Down (VOL-) button.
Manajemén Telepon
- Ngajawab / mungkas Telepon: Short press the Power button when a call comes in or during a call.
- Nolak Telepon: Press and hold the Power button for approximately 2 seconds when a call comes in.
LED Lights Functionality
The headphones feature integrated LED lights. Use the dedicated LED button to cycle through different light modes or to turn the lights on/off.
Pangropéa
beberesih
- Ngusap headphone ku lawon lemes, garing, tanpa lint.
- Ulah make cleaners abrasive, pangleyur, atawa sprays kimiawi.
- Ulah meunang Uap kana sagala bukaan.
Panyimpenan
- Simpen headphone dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- When not in use for extended periods, store them in their folded position (if applicable) to save space and protect the earcups.
Perawatan batré
- Pikeun ngahémat umur batré, eusian pinuh headphone sahenteuna tilu bulan sakali upami henteu dianggo sacara rutin.
- Hindarkeun sering-sering ngosongkeun batré.
Pamérésan masalah
| Masalah | Solusi |
|---|---|
| Headphone teu hurung. | Pastikeun headphone tos dicas pinuh. Sambungkeun kana sumber daya nganggo kabel USB. |
| Teu tiasa dipasangkeun sareng alat Bluetooth. |
|
| Taya sora atawa volume low. |
|
| Pangurangan Bising Aktif (ANC) teu tiasa dianggo. | Ensure the ANC feature is activated. Check for any specific ANC indicator lights. |
spésifikasi
| Ngaran modél | PlayPodsPro LED |
| Nomer Modél Item | 48 3010 |
| merek | Bontempi |
| Warna | Hideung |
| Faktor Bentuk | Wireless Leres |
| Konektipitas | Bluetooth |
| Kontrol bising | Pembatalan Noise aktip |
| Fitur husus | Lights (LED) |
| Bahan | palastik |
| Item Beurat | 12.2 ons (347 gram) |
| Dimensi produk | 9.21 x 7.05 x 3.31 inci |
| Produsén | Bontempi |
Garansi sareng Rojongan
For warranty information or technical support, please refer to the documentation included with your purchase or contact Bontempi customer service directly. Details for contacting support can typically be found on the official Bontempi websitus atanapi dina bungkusan produk.