Bubuka
This manual provides essential information for the safe and proper use of your Moni i-Size Multi Infant Car Seat. Designed for infants from 40 to 87 cm in height (Group 0+), this car seat ensures maximum safety and comfort for your child. Please read these instructions carefully before use and keep them for future reference.
Émbaran Kasalametan penting
- Always install the car seat rear-facing in the vehicle. This is the safest way for infants to travel.
- Ensure the 3-point safety harness is correctly fastened and adjusted to your child's size.
- Pernah ninggalkeun anak anjeun unattended dina korsi mobil.
- Ulah make korsi mobil lamun geus kalibet dina kacilakaan, sanajan euweuh karuksakan katempo.
- Tingali buku panduan nu boga kandaraan anjeun pikeun pedoman pamasangan korsi mobil anu khusus.
- The car seat is suitable for children from birth up to 13 kg.
Komponén produk
The Moni i-Size Multi Infant Car Seat includes the following main components:
- Ergonomic carrying handle (3-position adjustable)
- Adjustable memory foam headrest
- Kanopi panonpoé anu tiasa diatur sareng tiasa dicabut
- 3-point safety harness with shoulder pads and lower buckle covers
- Soft full-body support cushion
- panutup removable sarta bisa diumbah
Image: Moni i-Size Multi Infant Car Seat with the footmuff attached, showing the overall design and carrying handle.
Image: Moni i-Size Multi Infant Car Seat without the footmuff, highlighting the internal padding and harness system.
Setup sareng Instalasi
This car seat is designed for rear-facing installation using the vehicle's 3-point seat belt.
Installing the Car Seat in Your Vehicle
- Place the car seat on the vehicle seat, ensuring it is positioned rear-facing.
- Route the vehicle's 3-point seat belt through the designated belt guides on the car seat. Refer to the labels on the car seat for correct routing.
- Fasten the vehicle's seat belt buckle.
- Pull the shoulder belt tightly to remove any slack, ensuring the car seat is securely fastened and does not move more than 1 inch (2.5 cm) from side to side or front to back at the belt path.
- Ensure the carrying handle is in the upright or designated travel position as per the instructions.
Gambar: Sisi view of the car seat, illustrating the correct belt path for vehicle installation.
Nyaluyukeun Headrest
The memory foam headrest is adjustable to accommodate your child's growth. Locate the adjustment mechanism (usually a lever or button at the back or top of the headrest) and slide the headrest up or down until it is at the correct height for your child's shoulders.
Gambar: Deukeut view of the adjustable headrest and the 3-point harness system.
Parentah Operasi
Ngamankeun Anak anjeun
- Teundeun anak anjeun dina korsi mobil.
- Gabungkeun dua létah gesper teras selapkeun kana gesper dugi ka anjeun ngadangu sora klik.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack in the harness straps at the child's collarbone.
- Ensure the shoulder pads are positioned correctly over your child's shoulders.
Gambar: Hareupeun view of the car seat showing the 3-point harness system properly fastened.
Adjusting the Carrying Handle
The ergonomic carrying handle can be adjusted to 3 positions. Press the buttons on both sides of the handle simultaneously and rotate the handle to the desired position (carrying, stable base, or storage).
Image: Car seat with the carrying handle in the upright position, ready for transport.
Using the Sun Canopy
The sun canopy is adjustable and removable. Extend or retract the canopy as needed to protect your child from direct sunlight. To remove, detach it from its anchor points on the car seat frame.
Pangropéa sareng Perawatan
Cleaning the Fabric Cover
The fabric cover is removable and washable.
- Carefully remove the fabric cover from the car seat frame.
- Wash the cover at 30 degrees Celsius (86 degrees Fahrenheit) using a mild detergent.
- Do not bleach, tumble dry, or iron the cover.
- Allow the cover to air dry completely before reattaching it to the car seat.
Ngabersihkeun pigura
Lap bagian plastik sareng logam tina rangka jok mobil nganggo adamp lawon jeung sabun hampang. Ulah make cleaners abrasive atawa pangleyur.
Pamérésan masalah
Car Seat Feels Loose After Installation
Ensure the vehicle's 3-point seat belt is routed correctly through all designated belt guides and pulled tightly. The car seat should not move more than 1 inch (2.5 cm) at the belt path. Re-read the installation instructions and consult your vehicle's manual.
Harness is Difficult to Adjust
Check for any twists in the harness straps. Ensure the harness adjustment strap is not obstructed. If the harness is still stiff, ensure the child is not leaning against the straps, which can create tension.
Buckle is Sticking
Clean the buckle area. Food crumbs or debris can cause sticking. Do not lubricate the buckle. If the issue persists, contact customer support.
Spésifikasi produk
| Fitur | Rincian |
|---|---|
| Modél | i-Size Multi |
| Disarankeun Umur | Ti mimiti lahir |
| Kapasitas beurat | 0 nepi ka 13 kg |
| Height Capacity (Rear-facing) | 40 nepi ka 87 cm |
| Ukuran produk (L x W x H) | 42 x 33 x 73 cm |
| Beurat produk | 3 kg |
| Komposisi Bahan | 100% lawon poliéster |
| Jenis Abah | 3-titik abah kaamanan |
| Tipe Pamasangan | Vehicle 3-point seat belt (rear-facing) |
| Kasaluyuan | Compatible with Moni Kali, Tokyo, Rio, Ciara, Rafaello strollers (strollers not included) |
Garansi sarta Rojongan Palanggan
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Moni customer service. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official Moni websitus atanapi ngahubungan garis rojongan customer maranéhanana.
