1. Bubuka
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell Professional Sliding Table Saw TP-CC 10 T. Please read these instructions carefully before using the product and keep them for future reference. Understanding and following these guidelines will ensure optimal performance and extend the lifespan of your tool.
2. Parentah Kasalametan
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This table saw is designed for cutting wood and wood-like materials. Do not use it for other purposes.
- Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Hindarkeun kontak awak sareng permukaan bumi atanapi grounded.
- Kasalametan Pribadi: Always wear eye protection, hearing protection, and a dust mask. Do not overreach. Keep proper footing and balance at all times. Dress properly; avoid loose clothing or jewelry.
- Pamakéan sareng Perawatan Alat Daya: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
- Kasalametan Table Saw Spésifik: Ensure the blade guard is always in place and functioning correctly. Never reach into the blade area while the saw is running. Use push sticks or push blocks when cutting small pieces.
3. Produk Langkungview
The Einhell Professional Sliding Table Saw TP-CC 10 T is a powerful tool designed for precise woodworking. It features a 2000 W motor, a 254 mm carbide-tipped saw blade, and a sliding table for handling larger workpieces. Key components include a flexible parallel stop, an adjustable angle stop, and an efficient dust extraction system.
Gemblengna view of the Einhell Professional Sliding Table Saw TP-CC 10 T, highlighting its key features like the special saw blade, parallel stop, sliding table, and angle stop.
Fitur konci:
- Sliding Table: Facilitates precise cutting of larger workpieces.
- Parallel Stop: Mountable on both sides, with two positions on the right side, and a foldable extension for narrow cuts.
- Angle Stop: Solid aluminum construction with 15° increment adjustment, attachable to the sliding table.
- Saw Blade: 254 mm carbide-tipped blade, tiltable up to 45° and height adjustable.
- Fungsi Soft Start: Protects the motor and fuses during startup.
- Port ékstraksi lebu: For connecting a wet/dry vacuum cleaner to maintain a clean workspace.
- Desain mantap: Solid steel frame with rubberized feet for stability and low vibration.
- Transport Handles & Storage: Multiple handles and integrated holders for accessories and mounting parts for easy transport.
4. Setélan
Before initial use, ensure all components are present and undamaged. Refer to the packaging list for verification.
4.1. Unpacking jeung Majelis
- Carefully remove the table saw and all accessories from the packaging.
- Place the saw on a stable, level surface.
- Attach any necessary feet or stands if not pre-assembled.
4.2. Masang Mata Gergaji
- Pastikeun ragaji dicabut tina sumber listrik.
- Leupaskeun hansip sabeulah.
- Use the provided tools to loosen the blade retaining nut and remove the old blade (if applicable).
- Install the new 254 mm carbide-tipped blade, ensuring the rotation direction matches the arrow on the saw.
- Securely tighten the retaining nut and reattach the blade guard.
Detail of the special saw blade, 254 mm diameter with 24 teeth, designed for efficient cutting.
4.3. Attaching the Parallel Stop
- The parallel stop can be mounted on either side of the saw table.
- Slide the parallel stop into the guide rail and secure it at the desired position using the locking mechanism.
- For narrow cuts, the parallel stop can be positioned closer to the blade using its foldable extension.
The parallel stop, which can be mounted on both sides of the table for versatile cutting operations.
4.4. Positioning the Angle Stop
- Insert the angle stop into the T-slot on the sliding table.
- Adjust the angle to the desired setting (from -60° to +60° with 15° increments) and lock it in place.
Angle stop adjustable from -60° to +60°.
4.5. Nyambungkeun ékstraksi Debu
- Connect a suitable wet/dry vacuum cleaner to the 36 mm/63.5 mm dust extraction port on the saw.
- Ensure a secure connection to minimize dust exposure.
The 36 mm/63.5 mm dust extraction port, designed for connecting an Einhell wet/dry vacuum cleaner to keep the work area clean.
5. Parentah Operasi
Always ensure the saw is stable and the workpiece is properly supported before making any cuts.
5.1. Adjusting Blade Height and Angle
- Use the handwheel to adjust the blade height. The blade should extend slightly above the workpiece.
- To adjust the blade angle for bevel cuts, loosen the locking mechanism and tilt the blade up to 45 degrees. Securely lock it in place before cutting.
The saw blade, showing its ability to tilt up to 45 degrees and its height adjustment mechanism.
5.2. Using the Sliding Table
- For cross-cutting or cutting larger panels, place the workpiece on the sliding table.
- Ensure the workpiece is firmly against the angle stop or a suitable jig.
- Push the sliding table smoothly and steadily through the blade.
The sliding table feature, which can be locked in place for precise cuts.
5.3. Rip Cutting with the Parallel Stop
- Set the parallel stop to the desired width of cut.
- Ensure the workpiece is flat on the table and firmly against the parallel stop.
- Feed the workpiece slowly and evenly into the blade, using a push stick for the final portion of the cut.
A user operating the table saw, demonstrating its use for cutting a wooden plank, emphasizing safety with protective eyewear and mask.
6. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng operasi anu aman tina ragaji méja anjeun.
6.1. beberesih
- Salawasna cabut heula kabel gergaji sateuacan diberesihan.
- Remove sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum cleaner.
- Clean the sliding table and guide rails to ensure smooth operation.
6.2. Perawatan sabeulah
- Inspect the saw blade regularly for sharpness and damage. Replace dull or damaged blades immediately.
- Resin beresih jeung tumpukan pitch tina sabeulah ngagunakeun cleaner sabeulah cocog.
6.3. Inspeksi Umum
- Pariksa sagala screws na fasteners pikeun tightness.
- Pariksa kabel listrik pikeun karusakan naon waé.
- Ensure all moving parts operate smoothly. Lubricate as necessary according to the product's specific guidelines (if provided in a full manual).
Integrated supports for storing accessories and mounting parts, ensuring a tidy workspace.
7. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tiasa pendak sareng gergaji méja anjeun.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Saw teu ngamimitian | Teu aya catu daya; Saklar rusak; Protéksi overload diaktipkeun | Check power connection; Inspect switch; Allow motor to cool down and reset overload protection. |
| Mata pisauna teu motong kalawan mulus atawa kaina kaduruk | Dull or dirty blade; Incorrect blade for material; Improper feed rate | Replace or clean blade; Use appropriate blade; Adjust feed rate. |
| Geter kaleuleuwihi | Loose blade; Unstable saw; Damaged blade | Tighten blade nut; Ensure saw is on a stable surface; Replace damaged blade. |
| Dust extraction ineffective | Clogged hose; Loose connection; Vacuum cleaner not powerful enough | Clear hose; Secure connections; Use a more powerful vacuum cleaner. |
8. Spésifikasi
Technical data for the Einhell Professional Sliding Table Saw TP-CC 10 T.
| Fitur | Spésifikasi |
|---|---|
| Produsén | Einhell |
| Nomer modél | 4340435 |
| Ukuran produk (L x W x H) | 62.9 x 48.5 x 73 cm |
| Beurat | 22.85 kg |
| Warna | Hideung / Beureum |
| Jinis kakuatan | AC |
| Voltage | 240 volt |
| Kakuatan | 2000 Watt |
| Blade Length / Diameter | 254 milimeter |
| Bahan Sabeulah | Tungsten Carbide |
| Fitur husus | adjustment jero |
| Komponén Kaasup | Table saw, sliding table, saw blade |
| Sertifikasi | GS |
9. Garansi jeung Rojongan
Your Einhell Professional Sliding Table Saw TP-CC 10 T comes with a 3-Year Professional Warranty upon online registration. This warranty covers manufacturing defects and ensures the quality and longevity of your product.
9.1. Pendaptaran jaminan
To activate your 3-year professional warranty, please register your product online on the official Einhell website within the specified period after purchase. Refer to the product packaging or the Einhell website for detailed registration instructions.
9.2. Rojongan Palanggan
For technical assistance, spare parts, or warranty claims, please contact Einhell customer support. You can find contact information on the official Einhell website or through your local dealer. When contacting support, please have your model number (TP-CC 10 T) and serial number ready.
The comfortable handle for easy and quick transport of the table saw.
