Buku Panduan Pangguna Setrika Uap Tefal FV 5781 Easygliss Eco

Bubuka

Thank you for choosing the Tefal FV 5781 Easygliss Eco Steam Iron. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new steam iron. Please read these instructions carefully before first use and keep them for future reference.

Parentah Kasalametan penting

• Salawasna mastikeun voltage indicated on the iron's rating plate matches your mains voltage.
• Ulah ninggalkeun beusi unattended bari eta dihurungkeun atawa disambungkeun ka mains.
• Jauhkeun beusi sareng kabelna tina jangkauan barudak sareng piaraan nalika dihurungkeun atanapi tiis.
• Entong neuleumkeun beusi, kabel listrik, atanapi nyolok kana cai atanapi cairan sanésna.
• Unplug the iron from the mains socket before filling with water, emptying, or cleaning.
• Anggo setrika ngan ukur pikeun tujuan anu dimaksud: nyetrika baju.
• Do not operate the iron if it has been dropped, if there are visible signs of damage, or if it is leaking. Contact an authorized service center.
• Tapak sapatuna tiasa janten panas pisan. Hindarkeun kontak sareng permukaan anu panas.
• Salawasna nempatkeun beusi dina permukaan stabil, tahan panas nalika istirahat.

Produk Leuwihview

Familiarize yourself with the components of your Tefal FV 5781 Easygliss Eco Steam Iron.

Gambar 1: Pahareup-hareup view of the Tefal FV 5781 Easygliss Eco Steam Iron, showcasing its white and green design, water tank, and control dial.

Gambar 2: Handapeun view of the iron, highlighting the Durilium Airglide soleplate with its steam vents and precision tip.

Gambar 3: The iron shown with its approximate dimensions: 30 cm length, 15 cm height, and 13.5 cm width at the base.

Gambar 4: The iron in operation, emitting powerful steam from its soleplate, demonstrating its steam function.

Setup jeung pamakéan munggaran

1. Ngabongkar bungkusan: Taliti piceun beusi tina bungkusan na. Cabut pilem pelindung atanapi stiker tina soleplate.
2. Pangeusian cai: Ensure the iron is unplugged. Open the water filling inlet and fill the water tank with tap water up to the 'MAX' level indicator. Do not overfill. For areas with hard water, consider using a mix of tap water and distilled water (50/50).
3. Pemanasan Kahiji: Plug the iron into a suitable mains socket. Set the temperature dial to the maximum setting. Allow the iron to heat up completely. During the first use, a slight odor or smoke may be emitted; this is normal and will disappear after a short period.
4. Initial Steam Burst: To clean the steam vents, press the steam boost button a few times over an old cloth. This helps remove any manufacturing residues.

Parentah Operasi

Setélan Suhu

• Sort your laundry according to fabric type and recommended ironing temperature.
• Turn the temperature dial to the appropriate setting for your fabric. Refer to the fabric care labels on your garments.
• The indicator light will illuminate while the iron is heating and turn off when the desired temperature is reached.

Uap Setrika

• Pastikeun tank cai dieusian.
• Setel kenop suhu ka setelan nu cocog jeung uap (biasana ditandaan ku simbol uap dina kenop).
• Once the iron reaches the set temperature, you can activate the continuous steam by moving the steam control lever.
• For stubborn creases, use the Nguatkeun Kukus function by pressing the dedicated button.
• The Uap nangtung function allows you to steam hanging garments. Hold the iron vertically a few centimeters from the fabric and press the steam boost button.

Setrika garing

• If you wish to dry iron, ensure the steam control lever is set to the 'no steam' position.
• Setel kenop suhu ka setelan nu dipikahoyong.

Fungsi Semprot

• Press the spray button to moisten stubborn creases. Ensure the water tank contains water.

Perawatan sareng Pangropéa

Ngabersihkeun Soleplate

• After each use, allow the iron to cool down completely.
• Usap soleplate nganggo iklanamp cloth. Do not use abrasive cleaners or metallic scouring pads, as these can damage the Durilium Airglide coating.
• If starch or synthetic fibers have melted onto the soleplate, clean it with a soft damp cloth while the iron is still warm (but unplugged).

Descaling (Self-Clean Function)

Regular descaling helps maintain optimal steam performance and prolongs the life of your iron. The Tefal FV 5781 Easygliss Eco features an integrated anti-calc system.

1. Eusian bak cai nepi ka tingkat MAX.
2. Plug in the iron and set the temperature to maximum. Allow it to heat until the indicator light goes out.
3. Cabut setrika. Cepeng sacara horizontal di luhur bak cuci piring.
4. Activate the self-clean function (refer to the specific button/lever on your iron, usually marked "Self Clean" or similar). Shake the iron gently over the sink until all the water and scale have been flushed out.
5. Plug the iron back in and let it heat up to dry the soleplate. Unplug and let it cool down.

Panyimpenan

• Saatos dianggo, cabut beusi sareng kosongkeun cai sésana tina tanki.
• Ngidinan beusi pikeun niiskeun lengkep sateuacan disimpen.
• Store the iron vertically on its heel rest in a safe, dry place.

Pamérésan masalah

spésifikasi

• model: Tefal FV5781 Easygliss Eco
• merek: Tefal
• Tipe: Beusi uap
• Soleplate: Durilium Airglide
• Fitur husus: Eco-design, energy saving, Durilium Airglide soleplate
• warna: Bodas, Héjo
• Ukuran (approx.): 30 cm (Length) x 15 cm (Height) x 13.5 cm (Width)

Garansi sareng Rojongan

Your Tefal FV 5781 Easygliss Eco Steam Iron is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tefal website. For technical support, spare parts, or service inquiries, please contact Tefal customer service in your region. Keep your proof of purchase for warranty claims.

Sumberdaya Online: Kanggo inpormasi tambahan, FAQ, sareng pendaptaran produk, mangga buka resmi Tefal websitus.