Bubuka
Thank you for choosing the Heller 2000W Oscillating Upright Fan Heater. This appliance is designed to provide efficient and comfortable heating for small to medium-sized rooms. To ensure safe and optimal performance, please read this manual thoroughly before operating the heater and keep it for future reference.
Parentah Kasalametan penting
Nalika nganggo alat-alat listrik, pancegahan dasar kedah diturutan pikeun ngirangan résiko kahuruan, kejutan listrik, sareng tatu pikeun jalma, kalebet ieu:
- Baca sadaya parentah sateuacan nganggo manaskeun ieu.
- Pemanas ieu panas nalika dianggo. Pikeun nyingkahan kaduruk, ulah ngantep kulit anu bulistir némpél permukaan anu panas. Anggo gagang nalika mindahkeun pemanas ieu.
- Simpen bahan-bahan anu gampang kaduruk, sapertos parabot, bantal, sprei, kertas, baju, sareng gorden sahenteuna 1 méter (3 kaki) ti payun pemanas sareng jauhkeun tina sisi sareng tukang.
- Awas pisan diperlukeun nalika manaskeun mana wae anu dipaké ku atawa deukeut barudak atawa invalids sarta iraha wae manaskeun ieu ditinggalkeun operasi sarta unattended.
- Sok cabut pamanas upami teu dianggo.
- Ulah ngoperasikeun manaskeun mana wae ku kabel ruksak atawa colokan atawa sanggeus pamanas malfunctions, geus turun atawa ruksak dina ragam nanaon. Balik manaskeun ka fasilitas layanan otorisasi pikeun ujian, adjustment listrik atawa mékanis, atawa perbaikan.
- Ulah make di luar.
- Pemanas ieu henteu dimaksudkeun pikeun dianggo di kamar mandi, tempat cuci sareng lokasi jero ruangan anu sami. Entong milarian manaskeun dimana éta tiasa murag kana bak mandi atanapi wadah cai sanés.
- Ulah ngajalankeun ari handapeun karpét. Ulah nutupan ari ku karpet lémparan, runners, atawa panutup sarupa. Atur tali jauh ti wewengkon lalulintas sarta dimana eta moal tripped leuwih.
- Pikeun megatkeun sambungan manaskeun, balikkeun kadali kana OFF, teras cabut colokan tina stop kontak.
- Entong nyelapkeun atanapi ngantepkeun barang asing asup kana ventilasi atanapi bukaan knalpot sabab ieu tiasa nyababkeun shock listrik atanapi seuneu, atanapi ngaruksak manaskeun.
- Pikeun nyegah kamungkinan seuneu, ulah meungpeuk asupan hawa atanapi knalpot dina cara naon waé. Ulah dipaké dina surfaces lemes, kawas ranjang, dimana bukaan bisa jadi diblokir.
- A manaskeun boga panas tur arcing atawa sparking bagian jero. Entong dianggo di daérah dimana béngsin, cét, atanapi uap atanapi cairan anu gampang kaduruk dianggo atanapi disimpen.
- Paké manaskeun ieu ngan sakumaha ditétélakeun dina manual ieu. Pamakéan sanés anu henteu disarankeun ku produsén tiasa nyababkeun kahuruan, kejutan listrik, atanapi cilaka ka jalma.
- This heater includes a tip-over switch and overheat protection for enhanced safety. If the heater tips over or overheats, it will automatically shut off.
Produk Leuwihview

Figure 1: Heller 2000W Oscillating Upright Fan Heater. The heater is white, upright, with a large circular grille on the front. Two control knobs are visible on the top surface, along with a small red indicator light. The brand name 'HELLER' is printed below the grille, and a power switch is located at the base.
komponén:
- Kenop kontrol: Used to adjust heat settings and oscillation.
- Hawa outlet grille: Where heated air is expelled.
- Lampu Indikator Kakuatan: Caang nalika manaskeun beroperasi.
- Saklar kakuatan: Main on/off switch located at the base.
- Dasar: Provides stability for the upright design.
Disetél
- Ngabongkar: Taliti cabut manaskeun tina bungkusan na. Simpen bungkusan pikeun neundeun atanapi transportasi ka hareup.
- panempatan: Place the heater on a firm, level surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, curtains, and other combustible materials. Do not place the heater directly under a power outlet.
- Sambungan Daya: Ensure the heater is switched off (power switch at the base is in the 'OFF' position). Plug the power cord into a suitable 220-240V AC, 50Hz electrical outlet. Do not use extension cords or power boards.
Parentah Operasi
- Daya Hurung: Ensure the heater is properly set up and plugged in. Turn the main power switch at the base to the 'ON' position.
- Pilih Setélan Panas: Use the right control knob (thermostat/mode selector) to choose your desired heat setting:
- Ngan kipas: Pikeun sirkulasi hawa tanpa panas.
- Panas Lemah (1000W): For gentle warmth.
- Panas Tinggi (2000W): For maximum heating power.
- Adjust Thermostat (if applicable): Use the left control knob to set the desired room temperature. The heater will cycle on and off to maintain this temperature. Turn the knob clockwise for a higher temperature setting.
- Aktipkeun osilasi: To enable the oscillation function, turn the oscillation control knob (often integrated with the heat setting knob or a separate button/switch). This will allow the heater to rotate from side to side, distributing warm air more evenly across the room.
- Pareum listrik: To turn off the heater, first turn the heat setting knob to the 'OFF' position, then switch the main power switch at the base to 'OFF'. Finally, unplug the heater from the wall outlet.
Pangropéa
Regular cleaning and proper storage will help prolong the life of your heater.
- Sateuacan beberesih: Salawasna cabut manaskeun tina stop kontak listrik sarta ngidinan pikeun niiskeun lengkep saméméh beberesih.
- Bersihan Luar: Ngusap permukaan luar tina manaskeun ku lemes, damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif sabab tiasa ngaruksak permukaan.
- Ngabersihan grille: Use a vacuum cleaner with a brush attachment to remove dust and lint from the air inlet and outlet grilles.
- Panyimpenan: Upami teu dianggo, simpen pemanas di tempat anu tiis sareng garing, langkung saé dina bungkus aslina, pikeun ngajagaan tina lebu sareng karusakan.
- Ulah neuleumkeun manaskeun dina cai atawa cairan séjén.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pemanas teu hurung. | Not plugged in; Power switch off; Overheat protection activated; Tip-over switch activated. | Ensure plug is firmly in outlet; Turn power switch ON; Unplug, wait 30 mins, then restart; Place heater on a flat, stable surface. |
| Taya kaluaran panas. | Heat setting too low; Thermostat set too low; Overheat protection activated. | Increase heat setting; Adjust thermostat to a higher setting; Unplug, wait 30 mins, then restart. |
| Osilasi teu jalan. | Pungsi osilasi teu diaktipkeun. | Ensure oscillation control is turned ON. |
| Pemanas ngadadak pareum. | Overheat protection activated; Tip-over switch activated. | Unplug, allow to cool for 30 minutes, check for obstructions, then restart; Ensure heater is on a stable, level surface. |
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | HELLER |
| Nomer modél | HOFH2 |
| Kaluaran kakuatan | 2000W |
| Warna | Bodas |
| Faktor Bentuk | Jejeg |
| Fitur husus | Portable, Oscillating, Tip-over switch, Overheat protection |
| Item Beurat | 3 kg |
| Ukuran Paket | 28.2 x 21.7 x 13.5 cm |
| Pamakéan jero rohangan / outdoor | jero rohangan |
Garansi sareng Rojongan
This Heller product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact Heller customer support. If you experience any issues with your heater that cannot be resolved using the troubleshooting guide, please contact the retailer or Heller customer service for assistance.





