Buku Panduan Pangguna Pembersih Udara SHARP KI-SS50-W Plasmacluster sareng Humidifier

1. Produk Langkungview

The SHARP KI-SS50-W is an advanced air purifier with humidification capabilities, featuring SHARP's unique Plasmacluster 25000 technology. This unit is designed to improve indoor air quality by suppressing airborne and adhered viruses, pollen, and other microscopic particles, while also maintaining optimal humidity levels.

Fitur konci:

• Plasmacluster 25000 Technology: Effectively removes positive and negative static electricity, preventing pollen and microscopic particles from adhering to surfaces.
• Efficient Air Purification: Recommended for rooms up to approximately 23 tatami mats, with a purification time of 12 minutes for an 8-tatami room.
• Kapasitas Humidifikasi Tinggi: Features a two-layer humidifying filter, providing a maximum humidification capacity of 600mL/h.
• Operasi sepi: Achieves a low noise level of 43dB during 'strong' humidification, ensuring a comfortable environment.
• Desain Ipis sareng Hemat Ruang: With a depth of only 230mm, it can be placed neatly against walls without obstructing daily life.
• User-Friendly Mobility: Equipped with casters with stoppers for easy movement and secure placement, convenient for households with children.

Gambar 1.1: Hareupeun view of the SHARP KI-SS50-W Plasmacluster Air Purifier with Humidifier.

Image 1.2: Product dimensions showing height (619mm), width (384mm), and depth (230mm).

2. Setup Guide

2.1 Ngabongkar bungkusan

1. Sacara saksama cabut pembersih hawa tina bungkusanna.
2. Remove all protective films, tapes, and packing materials from the unit.
3. Check that all components are present: main unit, humidifying filter, water tank, and power cord.

2.2 Pamasangan Filter

The filters are typically pre-installed but may require removal of protective plastic bags before first use.

1. Buka panel pungkur unit.
2. Remove the HEPA filter, deodorizing filter, and pre-filter. Ensure any plastic packaging is removed from these filters.
3. Reinstall the filters in the correct order: pre-filter, deodorizing filter, and then the HEPA filter. Ensure they are securely in place.
4. Tutup panel pungkur.

Gambar 2.1: Ngabeledug view showing the pre-filter, double deodorizing filter, and HEPA filter.

2.3 Water Tank Preparation (for Humidification)

1. Cabut tangki cai tina sisi unit.
2. Unscrew the cap at the bottom of the water tank.
3. Fill the tank with clean tap water. Do not use hot water or water with additives.
4. Tutup deui tutupna.
5. Place the water tank back into the unit, ensuring it clicks into place.

Image 2.2: Demonstrates the easy-to-handle water tank and casters for mobility.

2.4 Nempatkeun

Place the unit on a flat, stable surface. Ensure there is adequate space around the unit for optimal airflow (at least 30 cm from walls or furniture). Avoid placing it near heat sources or in direct sunlight.

3. Parentah Operasi

3.1 Daya Hurung/Pareuman

• Sambungkeun kabel listrik ka stop kontak témbok.
• Pencét éta Kakuatan tombol dina panel kontrol pikeun ngahurungkeun atanapi mareuman unit.

3.2 Pamilihan Mode

The unit offers various operating modes:

• Modeu Pemurnian Udara: Activates the air purification function.
• Humidification Mode: Activates humidification along with air purification. Ensure the water tank is filled.
• Plasmacluster Spot Mode: Concentrates Plasmacluster ions for targeted deodorization or static electricity removal.
• Mode sari: Optimized for effective pollen removal.

Press the respective mode buttons on the control panel to select your desired operation.

3.3 Fan Speed ​​adjustment

You can adjust the fan speed to suit your needs:

• Otomatis: Otomatis nyaluyukeun laju kipas dumasar kana kualitas hawa.
• jempé: For quiet operation, ideal for nighttime.
• Sedeng: Operasi baku.
• luhur: For rapid air purification or humidification.

Ngagunakeun éta Laju kipas button to cycle through the options.

3.4 Fungsi Timer

Set the unit to operate for a specific duration:

• Pencét éta Timer button to select the desired operating time (e.g., 2 hours, 4 hours, 8 hours).
• The unit will automatically turn off after the set time.

Image 3.1: Control panel and illustration of low noise operation at 43dB.

3.5 Plasmacluster Technology Explained

The Plasmacluster technology generates positive (H+) and negative (O2-) ions, similar to those found in nature. These ions are released into the air and attach to the surface of airborne mold and bacteria. They transform into highly oxidative OH radicals, which extract hydrogen (H) from the protein on the surface of the mold/bacteria, breaking down the protein. The extracted hydrogen (H) and OH radicals then combine to form water (H2O), which returns to the air.

4. Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur panyaring hawa anjeun.

4.1 Pembersihan Pra-filter

Clean the pre-filter approximately once a month, or more frequently depending on usage and air quality.

1. Pareuman unit sareng cabut colokan tina stop kontak listrik.
2. Open the rear panel and remove the pre-filter.
3. Use a vacuum cleaner to remove dust and debris from the pre-filter. For stubborn dirt, wash it gently with water and a mild detergent.
4. If washed, ensure the pre-filter is completely dry before reinstalling.

Image 4.1: Illustration of cleaning the pre-filter with a vacuum cleaner while it's still attached to the rear panel.

4.2 Humidifying Filter and Water Tank Cleaning

Clean the humidifying filter and water tank regularly to prevent mold and bacteria growth.

1. Remove the water tank and humidifying filter from the unit.
2. Wash the water tank with water and a soft brush.
3. Clean the humidifying filter by soaking it in a solution of water and citric acid or a specialized humidifier cleaner to remove mineral deposits. Rinse thoroughly.
4. Ensure all parts are dry before reassembling and placing them back into the unit.

4.3 Unit Utama beberesih

• Ngusap bagian luar unit nganggo kaén anu lembut sareng garing.
• Ulah make cleaners abrasive atawa pangleyur.

4.4 Filter ngagantian

The HEPA filter and deodorizing filter have a lifespan and will need to be replaced periodically. Refer to the indicator lights on the unit or the product specifications for recommended replacement intervals (typically every 10 years for the HEPA filter under normal use).

5. Cara ngungkulan

If you encounter any issues, please refer to the following common problems and solutions before contacting customer support.

6. Spésifikasi

7. Émbaran jaminan

This SHARP product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

8. Rojongan Palanggan

For further assistance, technical support, or inquiries regarding your SHARP KI-SS50-W air purifier, please contact SHARP customer service.

• Websitus: Visit the official SHARP websitus pikeun sumber rojongan tur FAQs.
• Telepon: Tingali kana dokuméntasi produk anjeun pikeun nomer kontak layanan palanggan régional.
• Puseur Palayanan: Information on authorized service centers can be found on the SHARP websitus.