No

Manual pamaké

Bohlam Pangganti 2 PC Cocog sareng Satco A3662 60W 130V - Eb4

Bubuka

This manual provides essential information for the safe and effective use of your new replacement bulbs. Please read this manual thoroughly before installation and retain it for future reference.

These bulbs are designed as a direct replacement for Satco A3662 bulbs, offering 60W power at 130V.

Produk Leuwihview

A single clear light bulb with a flame-like tip and a brass screw base.

Image: A clear, flame-tip light bulb with a standard screw base. This bulb is designed for general illumination purposes.

The product consists of two replacement bulbs, specifically designed to be compatible with Satco A3662 models. They feature a CA10 bulb shape and operate at 60 watts and 130 volts, providing reliable illumination.

Setup sareng Instalasi

  1. Kasalametan munggaran: Before attempting installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
  2. Ngidinan Cooling: If replacing an existing bulb, allow the old bulb to cool completely before handling to prevent burns.
  3. Leupaskeun bohlam heubeul: Cabut bohlam anu lami tina stop kontak sacara ati-ati ku cara muterkeunana ngalawan arah jarum jam.
  4. Selapkeun Bohlam Anyar: Gently screw the new replacement bulb into the socket by turning it clockwise until it is snug. Do not overtighten.
  5. Mulangkeun Daya: Once the new bulb is securely installed, restore power to the fixture.
  6. Tes: Hurungkeun saklar lampu pikeun mastikeun bohlamna jalan kalawan bener.

Catetan: Always handle light bulbs by their base to avoid transferring oils from your skin to the glass, which can reduce bulb life.

Parentah Operasi

These bulbs are designed for standard on/off operation via a light switch. They do not require any special operating procedures beyond typical light bulb usage.

  • Ensure the bulb is installed in a compatible fixture with the correct voltage (130V).
  • The bulbs are rated for 60W. Do not exceed the maximum wattagrating lampu anjeun.
  • These bulbs are suitable for indoor use.

Pangropéa

These replacement bulbs are designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • beberesih: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • ngagantian: Replace bulbs when they burn out. The average life of these bulbs is approximately 5000 hours.
  • Panyimpenan: Store unused bulbs in their original packaging in a cool, dry place to protect them from damage.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Bohlam teu hurung.Taya kakuatan pikeun fixture nu.
Bohlam teu ngaco dina leres.
Bulb geus ngahontal tungtung hirup.
Pariksa circuit breaker / sekering.
Pastikeun bohlamna pageuh pageuh.
Ganti bohlam ku nu anyar.
Bohlam kedip-kedip.Sambungan leupas.
Saklar dimmer sauyunan (lamun lumaku).
Tighten bohlam dina stop kontak.
Ensure fixture is not on a dimmer if bulb is non-dimmable.
Bulb kaduruk kaluar gancang.Vol kaleuleuwihantage.
Sering naek sapédah on/off.
Ventilasi dina alatna goréng.
Pariksa fixture voltage.
Reduce frequency of switching.
Ensure adequate airflow around bulb.

spésifikasi

AtributNilai
Jenis produkBohlam ngagantian
KasaluyuanSatco A3662
Wattage60W
Voltage130V
Wangun BulbCA10
Rata Kahirupan5000 Jam
kaayaanAnyar
Dasar BulbFlanged
Pamakéan jero rohangan / outdoorjero rohangan

Garansi sareng Rojongan

Information regarding specific warranty terms for this product is not provided in the available data. For any product support or warranty inquiries, please contact the seller or manufacturer directly through the platform where the purchase was made.

Pabrikan: Generik

ASIN: B0CX8MSH8W

© 2024 Generik. Sadaya hak disimpen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.