1. Bubuka
Thank you for choosing the Visual Land Soundwave A1 Active Noise Cancelling Earbuds. These earbuds are designed to provide a superior audio experience with advanced features such as active noise cancellation, long playtime, and water resistance. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
Naon dina Box
- Soundwave A1 Earbuds (Left and Right)
- Ngecas Case
- Kabel Ngecas USB-C
- Tip Ceuli Tambahan (rupa-rupa ukuran)
- User Instructions (this manual)

Figure 1.1: Soundwave A1 Earbuds and Charging Case
2. Émbaran Kasalametan
Please read all safety warnings and instructions before using this product to ensure proper operation and prevent damage. Keep this manual for future reference.
- Ulah ngantepkeun earbud atanapi wadah ngecas ka suhu anu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
- Hindarkeun ragrag atanapi ngagentoskeun alat kana tabrakan anu kuat.
- Do not disassemble, repair, or modify the product. This will void the warranty.
- Jauhkeun tina jangkauan barudak sareng piaraan.
- Anggo ngan ukur kabel ngecas USB-C anu disayogikeun atanapi kabel anu sami anu disertipikasi.
- Ngadangukeun sora dina volume anu luhur teuing lila bisa ngabalukarkeun karusakan pangrungu. Atur volume ka tingkat anu aman.
3. Setélan
3.1 Ngecas Earbuds sareng Case
Before first use, fully charge the Soundwave A1 earbuds and charging case. The case has a 500 mAh battery capacity, providing up to 30 hours of additional playtime. A 15-minute charge can provide up to 5 hours of playtime.
- Simpen earbud kana wadah ngecas, pastikeun dipasangna kalayan leres.
- Sambungkeun kabel ngecas USB-C kana port ngecas dina casing sareng tungtung anu sanésna kana sumber daya USB (contona, adaptor témbok, port USB komputer).
- Indikator LED dina wadah ngecas bakal hurung pikeun nunjukkeun status ngecas. Sakali dicas pinuh, indikator tiasa pareum atanapi robih warna.

Figure 3.1: Earbuds in Charging Case with LED Indicators
3.2 Nyapasangkeun sareng Alat Anjeun
The Soundwave A1 earbuds use Bluetooth 5.3 for a stable and efficient wireless connection.
- Pastikeun yén earbuds dieusi sareng disimpen di jero wadah ngecas.
- Open the charging case lid. The earbuds will automatically enter pairing mode (or press and hold the pairing button on the case if available, refer to quick start guide for specific button location).
- Dina smartphone anjeun, tablet, atawa alat Bluetooth-diaktipkeun sejen, buka setélan Bluetooth.
- Milarian pikeun new devices. You should see "Soundwave A1" appear in the list of available devices.
- Select "Soundwave A1" to connect. Once connected, you will hear an audible confirmation, and the earbuds' indicator lights may change.
- For future use, the earbuds will automatically connect to the last paired device when removed from the case and Bluetooth is enabled on your device.
3.3 Achieving a Comfortable Fit
The Soundwave A1 earbuds come with 3 different ear tip sizes to ensure a secure and comfortable fit for optimal sound quality and noise cancellation.
- Try different ear tip sizes to find the best seal for your ear canal. A good seal is crucial for effective active noise cancellation and bass response.
- Lembut selapkeun earbuds kana ceuli anjeun sarta rada pulas pikeun ngamankeunana.
4. Ngoperasikeun Earbuds
4.1 Kontrol Toél
The Soundwave A1 earbuds feature intuitive touch controls for managing audio playback and calls. Specific touch gestures may vary slightly; refer to the quick start guide for detailed commands.
| Fungsi | Aksi |
|---|---|
| Play / Reureuh | Ketok tunggal dina boh earbud |
| Lagu salajengna | Ketok dua kali dina earbud katuhu |
| Lagu saméméhna | Ketok dua kali dina earbud kénca |
| Ngajawab / mungkas Telepon | Ketok tunggal dina boh earbud |
| Nolak Telepon | Pencét jeung tahan boh earbud |
| Aktipkeun Asisten Sora | Ketok tilu kali dina boh earbud |
4.2 Active Noise Cancellation (ANC) and Transparent Mode
The Soundwave A1 earbuds are equipped with 6-microphone Active Noise Cancellation for superior ambient noise reduction. They also feature a transparent mode for increased awareness of your surroundings.
- ANC On: Ngurangan bising ti luar, idéal pikeun perjalanan atanapi lingkungan anu bising.
- Modeu transparan: Allows you to hear your surroundings while still enjoying your audio, useful for conversations or when situational awareness is needed.
- ANC Pareum: playback audio standar tanpa pembatalan noise.
To switch between ANC modes, typically press and hold the touch control area on one of the earbuds for a few seconds. An audible prompt will confirm the mode change.
4.3 Tahan Cai (IPX5)
The Soundwave A1 earbuds are IPX5 water-resistant, meaning they can withstand splashes of water from any direction. This makes them suitable for workouts, running, and light rain.
- Ulah beuleum earbuds dina cai.
- Casing ngecasna teu tahan cai. Jaga supaya tetep garing.
- After exposure to sweat or water, ensure the earbuds are completely dry before placing them back into the charging case to prevent damage.
5. Pangropéa
Proper maintenance will extend the lifespan of your Soundwave A1 earbuds.
- beberesih: Rutin ngabersihkeun earbuds sareng wadah ngecas ku lawon anu lemes, garing, teu aya lint. Ulah make cleaners abrasive atawa pangleyur.
- Tips ceuli: Remove the ear tips and clean them with water and mild soap if necessary. Ensure they are completely dry before reattaching.
- Ngecas Kontak: Upami Anjeun ngalaman masalah ngecas, gently bersihkeun kontak nu ngecas dina duanana earbuds jeung jero wadahna ku swab katun garing.
- Panyimpenan: Upami teu dianggo, simpen earbud dina wadah ngecasna pikeun ngajaga sareng ngajaga daya tetep dicas. Simpen di tempat anu tiis, garing, sareng jauh tina sinar panonpoé langsung.
6. Cara ngungkulan
If you encounter issues with your Soundwave A1 earbuds, try the following solutions:
| Masalah | Solusi anu mungkin |
|---|---|
| Earbuds teu ngecas | Ensure earbuds are correctly seated in the case. Clean charging contacts. Try a different USB-C cable or power source. |
| Teu tiasa dipasangkeun sareng alat | Ensure Bluetooth is enabled on your device. Place earbuds back in case, close lid, then open to re-enter pairing mode. Forget "Soundwave A1" from your device's Bluetooth list and re-pair. Ensure earbuds are charged. |
| Teu aya sora atanapi volume handap | Check device volume. Ensure earbuds are connected. Try re-pairing. Clean ear tips and earbud mesh. |
| Sound cuts in/out | Move closer to your device. Avoid strong electromagnetic interference. Try re-pairing. |
| Kadali toél teu ngaréspon | Pastikeun ramo anjeun beresih jeung garing. Coba hurungkeun deui earbuds ku cara nempatkeun kana wadahna sareng cabut. |
If the problem persists, please contact Visual Land customer support.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | SOUNDWAVE A1 V2 |
| Téhnologi konektipitas | Bluetooth, Nirkabel |
| Vérsi Bluetooth | 5.3 |
| Kontrol bising | Active Noise Cancellation (6-mic) |
| Tingkat Résistansi Cai | IPX5 (Earbuds wungkul) |
| Métode kontrol | Toél |
| Waktu Ngecas (Earbuds) | 15 minutes for up to 5 hours playtime |
| Kapasitas Batré Carrying Case | 500 Miliamp Jam-jaman |
| Total Playtime (kalawan kasus) | Nepi ka 40 Jam |
| Panempatan Ceuli | Dina Ceuli |
| Faktor Bentuk | Dina Ceuli |
| Item Beurat | 2 ons |
| Produsén | Tanah Visual |
| Komponén Kaasup | Additional Ear Tips Sizes, Instructions, USB-C Charging Cable |
8. Garansi jeung Rojongan
Visual Land products are designed for reliability and performance. For warranty information and customer support, please visit the official Visual Land websitus atanapi ngahubungan departemén layanan palanggan maranéhna.
Visual Land Store: https://www.amazon.com/stores/VisualLand/page/A4CF77F9-86AF-4E18-8FBA-AB71C7375510
Please have your product model number (VLA1V2GEBLU) and purchase details ready when contacting support.