NutriBullet Triple Prep System 1500W

1. Safeguards penting

Please read all instructions carefully before operating your NutriBullet Triple Prep System. Failure to follow these instructions may result in injury or damage to the appliance.

• Salawasna pastikeun alat geus dicabut colokan saméméh assembly, disassembly, atawa beberesih.
• Ulah ngalelepkeun dasar motor kana cai atanapi cairan sanésna. Bersihkeun nganggoamp lawon wungkul.
• Avoid contact with moving parts. Keep hands and utensils out of the container while blending to prevent severe personal injury and/or damage to the blender.
• Do not blend hot liquids in sealed cups. The vented lid on the 1.8L pitcher is designed for hot liquids.
• Never operate the appliance with damaged blades or if the appliance malfunctions or is dropped. Contact customer service for assistance.
• Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma anu kakurangan kamampuan fisik, indrawi, atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kana kasalametanana.
• Jauhkeun barudak tina alat salami operasi.

2. Naon Kaasup

Your NutriBullet Triple Prep System comes with the following components:

• Dasar Motor 1500W
• 1.8L Blending Pitcher with Vented Lid
• 1.6L Food Processor Work Bowl
• 2 x To-Go Cups (710ml and 946ml)
• 2 x To-Go Cup Lids
• Stainless Steel Extraction Blade
• Nyiksikan / Grating Disc
• Kneading Hook
• Cincang Agul
• Pusher for Food Processor

Figure 2.1: Blender Components

Figure 2.2: Food Processor Components

3. Majelis & Setup

3.1 Assembling the Blender

1. Tempatkeun dasar motor dina permukaan anu bersih, garing, sareng rata.
2. Attach the 1.8L blending pitcher or a To-Go cup to the motor base. Ensure it is securely twisted into place.
3. For the 1.8L pitcher, ensure the vented lid is properly sealed. For To-Go cups, securely twist the extraction blade onto the cup.
4. Colokkeun kabel listrik kana colokan listrik 220V.

3.2 Assembling the Food Processor

1. Tempatkeun dasar motor dina permukaan anu bersih, garing, sareng rata.
2. Place the 1.6L food processor work bowl onto the motor base and twist clockwise until it locks into place.
3. Insert the desired blade (chopping blade, kneading hook, or slicing/grating disc) onto the central spindle inside the work bowl.
4. Secure the food processor lid onto the work bowl, ensuring it clicks into place. Use the pusher for adding ingredients through the feed chute.
5. Colokkeun kabel listrik kana colokan listrik 220V.

Figure 3.1: Food Processor Assembly

4. Parentah Operasi

The NutriBullet Triple Prep System features an intuitive touchscreen control panel that adapts to the attached accessory.

Figure 4.1: Control Panel and Accessories

4.1 Using the Touchscreen Control Panel

• The touchscreen activates when an accessory is properly attached to the motor base.
• Available functions (e.g., Low, Medium, High, Pulse) will illuminate based on the accessory.
• Press the desired program or speed setting to begin operation.
• Press the power button or the active program button again to stop.

4.2 Blending with the 1.8L Pitcher

1. Add ingredients to the 1.8L pitcher. Do not exceed the MAX fill line.
2. Secure the vented lid.
3. Place the pitcher onto the motor base and twist to lock.
4. Select a speed (Low, Medium, High) or a pre-programmed setting on the touchscreen.
5. For hot liquids, ensure the vented lid is used to allow steam to escape.
6. Once blending is complete, turn off the appliance, unplug, and carefully remove the pitcher. Use the pouring spout for easy serving.

Figure 4.2: Blending with the Pitcher

4.3 Making Smoothies with To-Go Cups

1. Add ingredients to a To-Go cup. Do not exceed the MAX fill line.
2. Twist the stainless steel extraction blade securely onto the cup.
3. Invert the cup and place it onto the motor base, twisting to lock it into place.
4. Select a speed or a pre-programmed setting. The system is designed for quick smoothie preparation.
5. After blending, unlock the cup from the base, remove the blade, and attach a To-Go lid for convenience.

Figure 4.3: Preparing Smoothies

4.4 Ngagunakeun Pangolah Kadaharan

1. Assemble the food processor with the desired blade (chopping, kneading, slicing/grating).
2. Add ingredients to the work bowl or through the feed chute using the pusher.
3. Amankeun tutupna.
4. Place the assembled food processor onto the motor base and twist to lock.
5. Select a speed (Low, Medium, High) or the Pulse function for controlled processing.
6. After processing, turn off the appliance, unplug, and carefully remove the lid and work bowl.

5. Perawatan & Pangropéa

Proper cleaning and maintenance will ensure the longevity and optimal performance of your NutriBullet Triple Prep System.

5.1 Ngabersihkeun Dasar Motor

• Salawasna cabut colokan dasar motor sateuacan beberesih.
• Ngusap dasar motor kalayan bersih, damp lawon. Ulah beuleum dina cai.
• Pastikeun base motor tos rengse garing saméméh nyimpen atawa pamakéan salajengna.

5.2 Asesoris beberesih

• All blending pitchers, To-Go cups, lids, and food processor components (work bowl, lid, blades, disc, hook, pusher) are top-rack dishwasher safe.
• Alternatively, wash with warm, soapy water, rinse thoroughly, and air dry.
• Handle blades with extreme care as they are sharp.

Figure 5.1: Easy Cleaning of Pitcher

6. Cara ngungkulan

If you encounter any issues with your NutriBullet Triple Prep System, refer to the following common problems and solutions:

• Alat henteu hurung: Ensure the power cord is securely plugged into a working outlet. Verify that the blending pitcher or food processor bowl is correctly assembled and locked onto the motor base.
• Motor eureun salila operasi: The appliance may have overheated. Unplug the unit and allow it to cool down for at least 15 minutes before attempting to use it again. Reduce the load or liquid amount for future use.
• Leaking from the base: Check that the blade assembly is tightly screwed onto the To-Go cup or that the pitcher lid is properly sealed. Ensure the MAX fill line is not exceeded.
• Bahan-bahan anu henteu adun lancar: Add more liquid to the mixture. Use the Pulse function to break down larger pieces before continuous blending. Ensure blades are clean and free of debris.
• Food processor not processing: Ensure the lid is securely locked onto the work bowl. Check that the blade or disc is correctly seated on the central spindle. Do not overload the bowl.

If the problem persists, contact NutriBullet customer support.

7. Spésifikasi

Gambar 7.1: Dimensi Produk

8. Jaminan & Dukungan

Your NutriBullet Triple Prep System is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, replacement parts, or any inquiries regarding your appliance, please visit the official NutriBullet websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Inpormasi kontak biasana tiasa dipendakan dina bungkusan produk atanapi resmi merek websitus.

Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.