1. Produk Langkungview
The KTC H34S18S is a 34-inch Ultrawide Curved Gaming Monitor designed to provide an immersive visual experience with high performance. It features a WQHD 3440x1440 resolution, a 1500R curvature, and a rapid 165Hz refresh rate, making it suitable for both gaming and professional use. The monitor supports HDR for vibrant colors and deep contrasts, and includes FreeSync & G-Sync compatibility for smooth, tear-free visuals.
fitur konci ngawengku:
- Ultrawide QHD Curved Display: 34-inch 1500R curved screen with 21:9 aspect ratio and 3440x1440 resolution for an immersive viewpangalaman.
- Pangalaman Kaulinan Anu Lemes: 165Hz refresh rate and adaptive sync technology reduce motion blur and screen tearing.
- Gamut Warna Lebar: HDR support, 4000:1 contrast ratio, 123% sRGB, and 98% DCI-P3 for accurate and vibrant color reproduction.
- Kanyamanan optimal: Features tilt, swivel, height, and pivot adjustments, along with low blue light and flicker-free modes to protect eyesight.
- Sababaraha Pilihan Konektipitas: Equipped with HDMI 2.0 ×2, DisplayPort 1.4 ×2, and 100mm x 100mm VESA mount compatibility.
Gambar: Hareupeun view of the KTC 34-inch Ultrawide Curved Gaming Monitor, highlighting its immersive display and sleek design.
2. Naon dina Box
Upon unboxing your KTC H34S18S monitor, please ensure all the following components are present:
- Monitor × 1
- Dasar × 1
- DP Cable ×1
- Kabel HDMI × 1
- Adaptor × 1
- Kabel Listrik × 1
- Obeng × 1
Image: An illustration showing all the components included in the KTC monitor packaging, such as the monitor, stand, and various cables.
3. Setup Guide
Follow these steps to set up your KTC H34S18S monitor:
- Kumpulkeun Stand: Attach the base to the monitor stand using the provided screwdriver and screws. Ensure it is securely fastened.
- Sambungkeun kabel:
- Sambungkeun kabel listrik ka input daya monitor teras ka stopkontak.
- Connect either the DisplayPort (DP) cable or HDMI cable from your computer's graphics card to the corresponding input port on the monitor. For optimal performance (165Hz refresh rate and WQHD resolution), DisplayPort 1.4 is recommended.
- Daya Hurung: Press the power button on the monitor to turn it on. The monitor should automatically detect the input signal.
- VESA Mounting (Optional): The monitor supports 100mm x 100mm VESA mounting. If you prefer to wall-mount or use a different monitor arm, remove the pre-assembled stand and attach your VESA-compatible mount.
Image: A diagram illustrating the monitor's flexible design, including swivel, pivot, height, and tilt adjustments, and highlighting the VESA mounting points on the back.
4. Parentah Operasi
Your KTC H34S18S monitor features an intuitive On-Screen Display (OSD) menu controlled by a five-way joystick located on the back of the monitor. This allows you to adjust various display settings.
4.1. OSD Menu Navigation
- Press the Joystick: Press the joystick inwards to open the OSD menu.
- Napigasi: Pindahkeun joystick ka luhur, ka handap, ka kenca, atanapi ka katuhu pikeun nganapigasi pilihan menu.
- Pilih/Konfirmasi: Press the joystick inwards again to select an option or confirm a setting.
- Kaluar: Pindahkeun joystick ka kénca pikeun balik deui ka ménu saméméhna atawa kaluar tina OSD.
Image: A close-up of the monitor's On-Screen Display (OSD) menu, showing various settings categories like Display, Color, Gaming Setup, and Advanced Settings.
4.2. Fitur tampilan
- Laju Anyarkeun (165Hz): For the smoothest visual experience, ensure your graphics card is configured to output at 165Hz. This setting can usually be adjusted in your operating system's display settings.
- Adaptive Sync (FreeSync & G-Sync Compatible): Enable FreeSync/G-Sync in the monitor's OSD menu and your graphics card's control panel to eliminate screen tearing and stuttering during gaming.
- HDR (Rentang Dinamis Tinggi): Activate HDR in your operating system's display settings for enhanced contrast and color vibrancy. The monitor supports HDR for a more lifelike image.
- Modeu Hemat Mata: Utilize the Low Blue Light and Flicker-Free modes within the OSD to reduce eye strain during prolonged use.
Image: A visual demonstrating the benefit of 165Hz refresh rate and FreeSync/G-Sync compatibility, showing a smooth image with the feature enabled versus a tearing image without it.
Image: An illustration highlighting the monitor's color capabilities, including 10.7 billion color support, 123% sRGB color gamut, and 4000:1 contrast ratio for brilliant images.
Image: A graphic illustrating the Eye Saver Mode, showing icons for Low Blue Light, Flicker-Free, and Anti-Glare features, designed to reduce eye fatigue.
5. Konektipitas
The KTC H34S18S monitor offers a variety of input and output ports to connect to your devices:
- Input Daya DC: Pikeun nyambungkeun adaptor kakuatan.
- Palabuhan HDMI 2.0 (x2): Supports WQHD (3440x1440) resolution at up to 100Hz.
- DisplayPort 1.4 Ports (x2): Supports WQHD (3440x1440) resolution at up to 165Hz. Recommended for full performance.
- Palabuhan USB 2.0: (Only for Firmware Upgrade)
- Jack Earphone: Pikeun nyambungkeun headphone atanapi speaker éksternal.
Gambar: A lengkep view of the monitor's rear panel, showing the various input and output ports including DC power, HDMI, DisplayPort, USB, and earphone jack.
6. Pangaluyuan Ergonomis
The KTC H34S18S monitor is designed with an ergonomic stand that allows for various adjustments to optimize your viewing comfort and workspace setup:
- Dengdekkeun: Adjust the screen angle from -5° to +20° (±3°) to find your preferred vertical viewdina posisi.
- Putar: Rotate the monitor horizontally up to ±20° to share your screen or adjust for different seating positions.
- Penyesuaian Jangkungna: Raise or lower the monitor by up to 90mm (±5mm) to align the top of the screen with your eye level.
- Pangsi: Rotate the screen ±5° for minor angular adjustments.
Image: A diagram illustrating the monitor's flexible design, showcasing its ability to swivel, pivot, adjust height, and tilt for optimal ergonomic positioning.
7. Pangropéa
To ensure the longevity and optimal performance of your KTC H34S18S monitor, follow these maintenance guidelines:
- Ngabersihan layar: Ngusap layar nganggo kaén anu lembut sareng teu aya serat. Pikeun smudges nekad, rada dampBilas lawon ku cai atanapi pembersih layar anu henteu ngandung amonia sareng henteu ngandung alkohol. Ulah nyemprotkeun pembersih langsung kana layar.
- Ngabersihan Casing: Anggo kaén anu lembut sareng garing pikeun ngabersihan monitor casing. Ulah make cleaners abrasive atawa pangleyur.
- Ventilasi: Pastikeun bukaan ventilasi dina monitor teu diblokir pikeun nyegah overheating.
- Pareuman Lamun Teu Dipake: Pareuman monitor upami teu dianggo kanggo waktos anu panjang pikeun ngahémat énergi sareng manjangkeun umurna.
8. Cara ngungkulan
If you encounter any issues with your KTC H34S18S monitor, refer to the following common troubleshooting steps:
| Masalah | Solusi anu mungkin |
|---|---|
| Taya Daya | Check if the power cord is securely connected to both the monitor and the power outlet. Ensure the power outlet is functioning. |
| Taya Sinyal | Verify that the video cable (DP or HDMI) is correctly connected to both the monitor and your computer. Ensure the correct input source is selected in the monitor's OSD menu. |
| Layar kedip-kedip | Check the video cable connection. Ensure your graphics card drivers are up to date. Try enabling or disabling Adaptive Sync (FreeSync/G-Sync) in the OSD. |
| Gambar kabur atanapi menyimpang | Adjust the resolution and refresh rate settings on your computer to match the monitor's native resolution (3440x1440) and refresh rate (165Hz). Check the sharpness setting in the OSD. |
| Dead Pixel | While rare, a dead pixel may appear. Some manufacturers have a minimum number of dead pixels before a replacement is offered. Refer to the warranty information for details. |
For more detailed troubleshooting or issues not listed here, please refer to the official user manual PDF or contact KTC customer support.
Video: An official KTC video demonstrating the features and functionality of the H34S18S Ultrawide Monitor, including its display quality and user interface.
9. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | CTC |
| Nomer modél | H34S18S (Product Title) / H33S17E (Item Model Number) |
| Ukuran layar | 34 inci |
| Resolusi | 3440 x 1440 Piksel (WQHD) |
| Rasio Aspék | 21:9 |
| Curvature | 1500R |
| Refresh Laju | 165Hz |
| Waktu Tanggapan | 1ms MPRT (from feature bullets) |
| Babandingan Kontras | 4000:1 |
| Warna Gamut | 123% sRGB, 98% DCI-P3 |
| Caang | 350 Candela |
| Konektipitas | HDMI 2.0 ×2, DisplayPort 1.4 ×2, USB 2.0 ×1 (for firmware), Earphone Jack |
| Kasaluyuan VESA | 100 mm × 100 mm |
| Dimensi produk | 5.31 x 32.48 x 21.2 inci |
| Item Beurat | 21.8 pon |
| Negara asal | Cina |
10. Garansi jeung Rojongan
KTC provides a manufacturer's warranty for this product. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official KTC websitus.
For further assistance, technical support, or to download the full user manual PDF, please visit the KTC support page or access the user manual PDF via this direct link: KTC H34S18S User Manual PDF.
