LEHMANN LGALM-2646

Lehmann LGALM-2646 Gasoline Lawn Mower User Manual

Model: LGALM-2646

1. Bubuka

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 Parentah Kasalametan

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2. Produk Langkungview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

Gambar 2.1: Gemblengna view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

Gambar 2.2: Detil view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 Komponén konci

3. Setélan

3.1 Majelis

The lawn mower requires minimal assembly. Follow these steps:

  1. Buka bungkus sadaya komponén tina kardus.
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 Cék Awal

Before first use, perform the following checks:

4. Operasi

4.1 Mimitian Mesin

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 Ngored

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 Pangaluyuan Jangkungna Motong

The Lehmann LGALM-2646 features a 7-stage central cutting height adjustment, ranging from 25 mm to 70 mm.

  1. Pareuman mesin jeung ngadagoan sabeulah eureun lengkep.
  2. Panggihan tuas pangaturan jangkungna motong, biasana caket salah sahiji roda tukang.
  3. Tarik tuas ka luar teras pindahkeun ka setélan jangkungna anu dipikahoyong. Setélan biasana dinomeran atanapi dituduhkeun ku takik.
  4. Ensure all wheels are set to the same height for an even cut.

5. Pangropéa

Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur mesin motong jukut anjeun. Salawasna cabut tutup busi sateuacan ngalakukeun pangropéa naon waé.

5.1 beberesih

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 Kamanusaan sarta Studi agul

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 Panyimpenan

For long-term storage (over 30 days), prepare the mower as follows:

6. Cara ngungkulan

Bagian ieu nyayogikeun solusi pikeun masalah umum anu anjeun tiasa pendak.

MasalahMungkin Cukang lantarananaSolusi
Mesin teu ngamimitianNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
Mesin jalan kasar atawa lapakDirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
Dipotong henteu rataDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
Geter kaleuleuwihiBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. Spésifikasi

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

FiturRincian
Nomer modélLGALM-2646
Pamindahan mesin146 cm³
Daya Mesin3.5 hp
Tipe DriveRear-Wheel Drive (Gasoline-powered)
Lebar motong46 cm
Motong adjustment Jangkungna7-stage central adjustment
Motong Range Jangkungna25 - 70 mm
Bahan PerumahanRobust Steel
StangFungsi lipat
Item Beurat29 kg
Ukuran produk (D x W x H)150 x 52 x 112 cm
WarnaHideung / Beureum

8. Garansi jeung Rojongan

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann websitus atanapi ngahubungan dealer lokal Anjeun.

Pabrikan: Lehmann
merek: LEHMANN

Dokumén Patali - LGALM-2646

Praview LEHMANN CNC Rotary Tables - Edition Katalog Utama 4 | PGD, E, DD Series
Edisi Katalog Utama LEHMANN 4 pikeun Tables Rotary CNC. Jelajahi PGD, E-Series, DD Series, sareng seueur deui. Leyuran-speed tinggi, backlash-gratis pikeun automation industri jeung manufaktur precision.
Praview Lehmann Firmware Updater: Parentah Operasi pikeun Konci sareng Pamiarsa RFID
Dokumén ieu nyayogikeun pitunjuk operasi pikeun parangkat lunak LEHMANN Firmware Updateater, ngajéntrékeun cara ngapdet firmware dina konci Lehmann, pamaca RFID, sareng terminal. Ngawengku syarat sistem, produk anu cocog, sareng pituduh léngkah-léngkah.
Praview LEHMANN Manajemén Software Guide pamaké: Konfigurasi sarta Operasi
Buku pituduh komprehensif pikeun LEHMANN Management Software (LMS), detailing konfigurasi, operasi, jeung manajemen sistem LEHMANN RFID dina mode offline boh online. Nyertakeun transponder sareng manajemén konci, setélan pangguna, sareng administrasi sistem.
Praview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronische Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Praview LEHMANN Primary und Secondary Controller Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installation, Konfiguration und Wartung der LEHMANN Primary und Secondary Controller für das Captos und Captos iCharge RFID-Schließsystem.
Praview Pitunjuk Operasi Konci Loker Éléktronik LEHMANN M610 LEGIC L043-A03
Pitunjuk operasi anu lengkep pikeun konci loker éléktronik LEHMANN M610 LEGIC L043-A03, anu ngawengku pamasangan, pamrograman, operasi, pangropéa, sareng ngungkulan masalah.