1. Bubuka
The BSEED V098-120V Adjustable Voltage Surge Protector Outlet is designed to safeguard your electronic devices and home appliances from damage caused by voltage fluctuations, power outages, and electrical surges. Featuring an LED digital display and adjustable voltage settings, this compact device provides reliable protection and peace of mind.
2. Émbaran Kasalametan
Mangga baca sareng ngartos sadaya parentah kaamanan sateuacan nganggo produk ieu. Gagalna nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa tatu serius.
- Ulah ngabongkar atawa ngaropéa alat.
- Pastikeun yén alat dianggo dina volume anu ditangtukeuntage (120V), current (15A), and power (1800W) limits.
- Hindarkeun alat ka cai atanapi kalembaban anu kaleuleuwihan.
- Do not use if the device or its connected appliance appears damaged.
- This product is made from premium flame-retardant ABS material, meeting UL94-V-1.0 grade test standards for enhanced safety.
3. Produk Langkungview
The BSEED V098-120V surge protector features a compact design with an integrated LED display and control buttons for easy operation.
Figure 3.1: Two BSEED V098-120V Surge Protector Outlets.
Gambar 3.2: Detil view of the surge protector's LED display and control buttons. The display shows current voltage, and the side buttons are used for setting high voltage panyalindungan, low voltage protection, and delay time.
Fitur konci:
- Adjustable Voltage panyalindungan: Set custom high and low voltage bangbarung.
- Setélan waktos reureuh: Configure a delay before power restoration after a voltage acara.
- Tampilan Digital LED: Clearly shows current operating status and settings.
- Leuwih / Dina Voltage panyalindungan: Automatically cuts off power to prevent appliance damage.
- Desain kompak: Wall tap adapter design saves space and does not block other outlets.
Figure 3.3: The compact size of the surge protector, measuring approximately 3.91 inches in height and 2.11 inches in width, designed to not obstruct adjacent outlets.
4. Setélan
- Ngabongkar: Sacara saksama cabut pelindung surge tina bungkusanna.
- mariksa: Pariksa alat pikeun karuksakan nu katingali. Ulah make lamun ruksak.
- Colokkeun: Insert the surge protector directly into a standard 120V wall outlet. The LED display will illuminate, showing the current voltage.
- Sambungkeun Alat: Plug your appliance into the surge protector's outlet. Ensure the appliance's power consumption does not exceed 1800W (15A at 120V).
5. Parentah Operasi
The BSEED V098-120V allows you to adjust its high voltage panyalindungan, low voltage protection, and power-on delay settings.
Nyaluyukeun parameter:
- With the device plugged in and powered on, press and hold the central 'SET' button on the side for approximately 2 seconds until the display changes to show an adjustable parameter (e.g., 'H' for high voltagjeung).
- Ngagunakeun éta '+' jeung '-' buttons (located above and below the 'SET' button) to increase or decrease the displayed value.
- Pencét éta 'SET' button briefly to cycle through the adjustable parameters:
- H (High Voltage panyalindungan): Set the maximum acceptable voltage. Lamun voltage exceeds this, power will be cut.
- L (Low Voltage panyalindungan): Set the minimum acceptable voltage. Lamun voltage drops below this, power will be cut.
- S (Delay Time): Set the delay in seconds before power is restored after a voltage event. This protects appliances like refrigerators from rapid power cycling.
- Once you have set all desired parameters, stop pressing buttons. The device will automatically save the settings and return to displaying the current voltage sanggeus sababaraha detik teu aktip.
Video 5.1: Demonstration on how to adjust the voltage protection parameters and delay time on the BSEED V098-120V surge protector.
6. Pangropéa
The BSEED V098-120V surge protector requires minimal maintenance.
- Jaga alat tetep beresih sareng leupas tina lebu. Paké kaen garing, lemes keur beberesih.
- Ulah make cleaners cair atawa bahan abrasive.
- Pastikeun ventilasi ditangtoskeun sabudeureun alat.
7. Cara ngungkulan
If you encounter issues with your BSEED V098-120V surge protector, refer to the table below for common problems and solutions.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu hurung. | No power from wall outlet; device malfunction. | Check wall outlet with another device. If still no power, contact customer support. |
| Appliance not receiving power. | Voltage outside set limits; delay time active. | Check the LED display for current voltage. Wait for the delay time to complete. Adjust voltage limits if necessary. |
| Pintonan nunjukkeun kode kasalahan. | Kasalahan internal. | Unplug the device for 30 seconds and plug it back in. If the error persists, contact customer support. |
8. Spésifikasi
- model: V098-120V
- merek: BSEED
- Voltage: 120 volt
- Total Outlet Daya: 1
- Ayeuna: 15 Amps (Maks)
- kakuatan: 1800 Watt (Max)
- Fitur husus: Surge Protection, Adjustable Voltage, LED Display
- Bahan: High-quality ABS (Flame Retardant UL94-V-1.0)
- Beurat barang: 10.5 ons
- Ukuran Paket: 5.35 x 5.28 x 3.7 inci
9. Garansi jeung Rojongan
BSEED provides a welcome guide with your purchase and offers 24-hour customer service. If you have any requests or doubts, please feel free to contact us.
- Palayanan palanggan: Available 24 hours.
- Kontak: Refer to the contact information provided in your product packaging or on the official BSEED websitus.
