1. Produk Langkungview
The Inateck HB2025C USB C Hub is designed to expand the connectivity of your host device. It converts a single USB-C port into four USB 3.2 Type-A ports, enabling high-speed data transfer for multiple peripherals. This hub is compact, lightweight, and compatible with various operating systems, making it suitable for both desktop and portable use.
- 4-Port USB-C Hub: Expands one USB-C port into four USB 3.2 Type-A ports.
- USB 3.2 Gen 2 Data Transfer: Offers a high-speed transfer rate of 10Gbps, backward compatible with USB 3.0. The four USB-A ports share this 10Gbps speed.
- Kompak sareng Portabel: Measures 10.2 x 3.3 x 1.4 cm and weighs 44g, designed for easy transport.
- Kasaluyuan lega: Supports Windows 11/10/8/7, Mac OS, and Linux.
- Nyolok sareng Puter: Supports hot-swapping and requires no driver installation.
- Panjang kabel: Features a 1.6 ft (50 cm) integrated cable for flexible connection.
Figure 1: Illustrates the enhanced data transfer speed of USB 3.2 Gen 2 (10Gbps) compared to USB 3.0.
Figure 2: The compact and portable design of the Inateck USB C Hub, measuring 10.1 cm in length.
2. Parentah Setup
- Sambungkeun Hub: Plug the USB-C connector of the Inateck HB2025C hub into an available USB-C port on your computer or host device.
- Pangenal otomatis: The hub supports hot-swapping and is plug-and-play. Your operating system (Windows, Mac OS, Linux) should automatically detect and configure the device without requiring additional driver installation.
- Sambungkeun Periferal: Once the hub is recognized, you can connect your USB-A devices (such as external hard drives, USB flash drives, keyboards, mice, etc.) to the four available USB 3.2 Type-A ports on the hub.
Figure 3: The hub connected to a laptop, highlighting its broad operating system compatibility and hot-swappable feature.
3. Ngoperasikeun Hub
3.1 Mindahkeun Data
- The hub provides four USB 3.2 Gen 2 Type-A ports, collectively supporting data transfer speeds up to 10Gbps.
- Connect your USB 3.2 or USB 3.0 compatible devices to these ports for optimal performance.
- For devices that are not USB 3.0/3.2 compatible, the hub will operate at the highest supported speed of the connected device (e.g., USB 2.0).
Figure 4: The hub facilitating connections for USB 3.2 storage devices, demonstrating its capability to support high-speed peripherals.
3.2 Power and Charging
- The Inateck HB2025C hub is designed for data transfer and does henteu support charging devices.
- It draws power from the host computer's USB-C port. The maximum current output is typically 5V/3A, but this can vary depending on the host computer's port capabilities.
- For devices requiring significant power (e.g., multiple external hard drives), it is recommended to use self-powered versions of those devices to ensure stable operation and prevent intermittent disconnections.
4. Pangropéa
- beberesih: Use a soft, dry cloth to clean the hub. Avoid liquid cleaners or abrasive materials.
- Panyimpenan: Simpen hub dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Penanganan: Ulah nepi ka ngarubuhkeun hub atawa ngabalukarkeun dampak anu kuat. Ulah nyoba ngabongkar atawa ngarobah alat.
Figure 5: The hub's compact design allows for easy storage and transport in a laptop bag or briefcase.
5. Cara ngungkulan
- Alat Teu Dipikawanoh:
Ensure the hub's USB-C connector is fully inserted into your computer's port. Try connecting the hub to a different USB-C port on your computer. If a specific peripheral is not recognized, try connecting it directly to your computer to verify its functionality. Rebooting your computer can also resolve recognition issues. - Laju Transfer Data Leungit:
Verify that both your host computer's USB-C port and the connected peripheral support USB 3.2 Gen 2 (10Gbps) or USB 3.0 (5Gbps) for optimal speeds. Older USB 2.0 devices will operate at their native slower speeds. The 10Gbps bandwidth is shared among all four ports; heavy simultaneous usage of multiple high-speed devices may result in reduced individual transfer rates. - Intermittent Disconnections:
This can occur if connected devices draw more power than the hub can supply from the host port. The hub does not provide external power. For power-intensive devices like external hard drives, use models with their own power adapters or connect only one such device at a time to the hub. - Hub Becomes Warm:
It is normal for the hub to become warm during extended use, especially when transferring large amounts of data or with multiple devices connected. This is typically due to power dissipation and does not indicate a malfunction. Ensure adequate ventilation around the hub.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Inateck |
| Nomer modél | HB2025C-BK |
| Panganteur Hardware | USB Type C (Input), 4x USB Type A (Output) |
| Laju Mindahkeun Data | Nepi ka 10Gbps (USB 3.2 Gen 2) |
| Panjang kabel | 1.6 ft (50 cm) |
| Kasaluyuan System Operasi | Windows 7/8/10/11, Mac OS, Linux |
| Item Beurat | 1.76 ons (kira-kira 44g) |
| Ukuran produk (L x W x H) | 4.02 x 1.3 x 0.55 inci (10.2 x 3.3 x 1.4 cm) |
| Warna | Hideung |
Figure 6: The hub featuring its 50cm extended cable, allowing for convenient placement with desktop setups.
7. Garansi jeung Rojongan
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included in your product packaging or visit the official Inateck website. For technical support, troubleshooting assistance, or any product-related inquiries, please contact Inateck customer service through their official channels or the retailer where the product was purchased.
The package includes: 1 x Inateck USB C 3.2 Hub; 1 x User Manual.
