MD-810 Outdoor Metal Detector User Manual

1. Émbaran Kasalametan

Please read all safety instructions carefully before operating the MD-810 metal detector. Failure to follow these instructions may result in injury or damage to the device.

• Kasalametan batré:
  • Use only 2 x 9V 6F22 alkaline batteries (NOT included) as specified.
  • Ulah campur batré heubeul jeung anyar, atawa tipena béda accu.
  • Pastikeun batréna dipasang kalayan polaritas anu leres (+/-).
  • Cabut batré upami alat moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
  • Buang batré anu dipaké sacara tanggung jawab nurutkeun peraturan lokal.
• General Operation Safety:
  • Salawasna kéngingkeun idin sateuacan milarian di lahan pribadi.
  • Be aware of your surroundings and potential hazards such as uneven terrain, sharp objects, or live electrical lines.
  • Do not use the detector near active electrical power lines or buried cables.
  • The search coil is waterproof, but the control unit is not. Do not submerge the control unit in water.
  • Avoid operating the detector in thunderstorms or extreme weather conditions.
  • Jauhkeun alat tina médan magnét anu kuat.

2. Produk Langkungview

The MD-810 is an advanced underground metal detector designed for treasure hunting, relic recovery, and general metal detection. It features multiple operation modes, adjustable sensitivity, and a clear LCD display for efficient and accurate target identification.

Gambar 2.1: The MD-810 metal detector, showing the main control unit and the search coil. The control unit features a large LCD screen and various control buttons.

Fitur konci:

• Practical Modes Switching: Offers 5 distinct operation modes: All-metal (A-M), Discrimination (DISC), Memory, Jewelry, and Pinpoint (P-P) for versatile detection.
• Layar LCD ageung: A 3.3-inch LCD screen with white backlight provides clear target information, depth indication, and battery status.
• Operasi ramah-pamaké: Designed for ease of use, allowing for simple setup and intuitive control.
• Coil Pilarian Waterproof: The 10-inch round search coil is fully waterproof, enabling detection in shallow water environments.
• Adjustable Stem: The length of the detector's stem can be easily adjusted from 105cm to 131cm (41.34-51.57in) to suit operators of different heights.
• Kontrol sensitipitas: 5 grades of sensitivity adjustment to optimize performance based on ground conditions and target size.
• Target Discrimination: Capable of discriminating between 6 kinds of target metals.
• Eupan Balik Audio: 3 kinds of sound frequencies indicate different metals, with 3 grades of volume indication.

Gambar 2.2: The MD-810 metal detector is suitable for hunting coins, relics, jewelry, gold, and silver, as well as for general outdoor underground metal detection.

3. Setup jeung Majelis

Follow these steps to assemble your MD-810 metal detector and prepare it for use.

3.1. Idéntifikasi komponén:

Sateuacan ngarakit, pastikeun sadaya komponén aya:

• Control Unit with LCD display
• Search Coil (10-inch round)
• Adjustable Stem (upper, middle, lower sections)
• Sandaran leungeun
• Fasteners for search coil and control unit

3.2. Léngkah-léngkah Majelis:

1. Gantelkeun Coil Pilarian:

   Connect the search coil to the lower stem using the provided non-metallic bolt and nut. Ensure it is securely fastened but do not overtighten.

2. Assemble the Stem:

   Connect the lower stem (with the search coil) to the middle stem, and then connect the middle stem to the upper stem. Ensure the spring clips or locking mechanisms engage properly.

3. Mount the Control Unit:

   Slide the control unit onto the top of the upper stem. Secure it in place using the designated locking collar or screw. Ensure the control unit is firmly attached and does not wobble.
4. Sambungkeun Kabel Koil:

   Carefully wrap the search coil cable around the stem, ensuring it is not tangled or pinched. Plug the coil cable connector into the corresponding port on the control unit. Tighten the collar on the connector to secure it.

5. Pasang Batré:

   Open the battery compartment on the control unit. Insert two 9V 6F22 alkaline batteries, observing the correct polarity (+/-). Close the battery compartment securely.

6. Sesuaikeun Panjang Batang:

   Adjust the length of the stem to a comfortable height. The detector should allow you to sweep the search coil parallel to the ground without bending over. The adjustable range is 105cm to 131cm (41.34-51.57in).

   

   Gambar 3.1: The retractable rod allows for height adjustment from 105cm to 131cm for comfortable use.

4. Parentah Operasi

This section details how to operate your MD-810 metal detector effectively.

4.1. Hurung/Pareuman:

Pencét jeung tahan tombol POWER button to turn the detector on or off. The LCD screen will illuminate upon power-on.

4.2. Understanding the Display:

The LCD screen provides crucial information:

• ID sasaran: Numerical value and icon indicating the probable type of metal detected.
• Depth Indication: Estimates the depth of the target (e.g., 2", 4", 6", 8"+ for coins).
• Tingkat sensitipitas: Shows the current sensitivity setting (5 grades).
• Indikator batré: Displays remaining battery life (4 grades).
• Kakuatan sinyal: Indicates the strength of the detected signal (5 grades).
• Tingkat volume: Shows the current audio volume (3 grades).

4.3. Modeu Operasi:

The MD-810 offers 5 operation modes. Press the MODÉ tombol pikeun siklus ngaliwatan aranjeunna.

Gambar 4.1: Illustration of the 4+1 operation modes: All-Metal, Disc, Memory, Jewelry (motion modes), and Pinpoint (non-motion mode).

• ALL-METAL Mode (A-M):

  In this motion mode, the detector will respond to all types of metals. This is ideal for finding all metal objects or when the type of metal is unknown.
• DISC Mode (Discrimination):

  This motion mode allows you to eliminate certain kinds of metal from detection. You can adjust the discrimination level to ignore unwanted items like iron or foil. The detector will not respond to discriminated metals.

• Modeu MEMORI:

  This motion mode allows the detector to remember specific kinds of metals you choose to detect. It will only respond to these selected metals, ignoring others.

• Modeu PERHIASAN:

  This motion mode is specifically designed to find jewelry. It will eliminate iron signals but will respond to other metals commonly found in jewelry.
• PINPOINT Mode (P-P):

  This is a non-motion mode used to accurately locate the exact position of a detected target. Once a target is found in a motion mode, switch to P-P mode, hold the coil steady, and move it slowly to pinpoint the target's center.

4.4. Penyesuaian Sensitipitas:

Pencét éta SENS button to adjust the sensitivity level (5 grades). Higher sensitivity increases detection depth but may also increase false signals in mineralized ground. Start with a medium setting and adjust as needed.

4.5. Penyesuaian Volume:

Pencét éta VOL button to adjust the audio volume (3 grades).

4.6. Sweeping Technique:

Proper sweeping technique is crucial for effective detection:

1. Keep the search coil parallel to the ground at all times, approximately 1/2 inch (1-2 cm) above the surface.
2. Move the search coil slowly and steadily from side to side in overlapping sweeps. Avoid lifting the coil at the end of each sweep.
3. Overlap each sweep by about half the coil's diameter to ensure complete ground coverage.
4. When a target is detected, the detector will emit an audio tone, and the LCD will display target information.

Gambar 4.2: The metal detector sends signals into the ground and detects reflections from buried metal objects.

Gambar 4.3: The MD-810 features adjustable sensitivity, a pinpointing function for exact target location, and DISC mode for discriminating unwanted metals.

5. Pangropéa

Proper care and maintenance will extend the life of your MD-810 metal detector.

• beberesih:
  • Wipe the search coil with a damp cloth after use, especially if used in wet or muddy conditions.
  • Clean the control unit and stem with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the control unit is kept dry.
• Perawatan batré:
  • Remove batteries if the detector will not be used for more than a week to prevent corrosion from battery leakage.
  • Replace batteries when the low battery indicator appears on the LCD.
• Panyimpenan:
  • Simpen detektor di tempat anu tiis sareng garing upami henteu dianggo.
  • Hindarkeun nyimpen dina sinar panonpoé langsung atanapi suhu ekstrim.
  • If disassembling for storage, ensure all components are clean and dry.
• Perawatan kabel:
  • Do not pull on the search coil cable. Always grasp the connector when unplugging.
  • Inspect the cable periodically for any signs of damage.

6. Cara ngungkulan

If you encounter issues with your MD-810 metal detector, refer to the following common problems and solutions:

7. Spésifikasi

Detailed technical specifications for the MD-810 metal detector:

8. Garansi jeung Rojongan

The MD-810 metal detector is manufactured to high quality standards. For specific warranty information, please refer to the documentation included with your purchase or contact the seller directly.

Rojongan Palanggan:

If you have any questions, require technical assistance, or need to report an issue with your MD-810 metal detector, please contact the seller or manufacturer through the platform where you purchased the product. Provide your order number and a detailed description of the issue for prompt assistance.

For general inquiries or to provide feedback, please use the contact information provided by the retailer or manufacturer.