XIXIMENG R36S Retro Handheld Game Console User Manual

1. Bubuka

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your XIXIMENG R36S Retro Handheld Game Console. Please read this manual thoroughly to ensure proper use and to maximize your gaming experience.

2. Produk Langkungview

2.1 Fitur konci

• tampilan: 3.5-inch IPS screen with wide viewdina sudut.
• Prosesor: Quad-core 64-bit Cortex-A35, up to 1.8GHz.
• Mémori: 1GB DDR3L RAM.
• Panyimpenan: 64GB capacity, supporting dual TF card design for independent system and game storage.
• Sistem operasi: Open-source Linux system.
• Emulasi: Supports 21 emulators for over 15,000 pre-installed games.
• Batré: 3500mAh high-capacity battery for extended playtime.
• Kadali: Dual 3D joysticks, D-pad, action buttons, and upgraded L/R shoulder keys.
• Konektipitas: OTG port for external display or gamepad connection.

2.2 Console Components

Familiarize yourself with the various parts of your R36S console:

Gambar: Hareupeun view of the R36S console, showing the screen, D-pad, dual joysticks, action buttons (A, B, X, Y), Start, Select, and function buttons.

Gambar: Balik view of the R36S console, highlighting the L1, L2, R1, R2 shoulder buttons.

• Layar IPS 3.5 inci: Pintonan resolusi luhur pikeun visual anu jelas.
• D-Pad: Directional pad for movement and menu navigation.
• Dual 3D Joysticks: For precise analog control in games.
• Tombol Aksi (A, B, X, Y): Primary game input buttons.
• Tombol Mimitian/Pilih: For game functions and menu selections.
• L1/L2/R1/R2 Shoulder Buttons: Additional input buttons, located on the top rear of the console.
• Tombol Daya: Pikeun ngaktipkeun atanapi mareuman konsol.
• Tombol Volume: Pikeun nyaluyukeun kaluaran audio.
• Palabuhan USB-C: For charging and OTG connectivity.
• Jack headphone: Pikeun kaluaran audio kana headphone.
• Slot Kartu TF: Two slots for system and game storage cards.

3. Setup Awal

3.1 Ngecas Konsol

Before first use, fully charge the console. Connect the provided USB-C cable to the console's USB-C port and the other end to a compatible USB power adapter (not included) or a computer USB port. The charging indicator will illuminate and turn off once fully charged.

3.2 Inserting Storage Cards

The R36S uses a dual TF card system. One card is for the operating system, and the other is for game ROMs. Ensure both cards are properly inserted into their respective slots before powering on the device.

• Locate the TF card slots on the side of the console.
• Gently insert the system TF card into the designated slot until it clicks into place.
• Insert the game ROMs TF card into the second slot until it clicks.
• Pikeun nyabutna, pencét kartu lalaunan ka jero dugi ka kaluar.

4. Parentah Operasi

4.1 Daya Hurung/Pareuman

• Pikeun Ngahurungkeun: Pencét terus tahan tombol Daya nepi ka layar hurung.
• Pikeun mareuman: Press and hold the Power button, then select the 'Shutdown' option from the menu. Alternatively, a quick press of the Power button may put the device into sleep mode.

4.2 Napigasi Antarmuka

Use the D-pad or the left analog joystick to navigate through menus and select options. The 'A' button typically confirms a selection, while the 'B' button usually cancels or goes back.

4.3 Maén Kaulinan

• From the main menu, select the desired emulator or game system.
• Browse the list of available games using the D-pad or joystick.
• Press the 'A' button to launch a game.
• During gameplay, use the D-pad, joysticks, and action buttons as per the game's controls.

4.4 Saving and Loading Game Progress

Most emulators support in-game saving and loading (savestates). Refer to the specific emulator's menu (often accessed by pressing a combination of buttons like 'Select' + 'X' or 'Start' + 'Select') for options to save, load, or exit a game.

4.5 Setélan Sistim

Access the system settings menu to customize various aspects of your console, including display brightness, audio volume, Wi-Fi connectivity (if available), and controller mapping. Navigation within the settings menu follows the same principles as the main interface.

4.6 Connecting External Devices (OTG)

The R36S features an OTG (On-The-Go) port, allowing connection to external devices.

Image: The R36S console highlighting the OTG port and illustrating connections to a large screen display and an external gamepad via an OTG adapter.

• Tampilan éksternal: Connect an OTG adapter (not included) to the USB-C port, then connect an HDMI cable (via an appropriate adapter) to an external monitor or TV for a larger screen experience.
• External Gamepad: Connect a USB gamepad via an OTG adapter to play games with an alternative controller.

5. Pangropéa

5.1 beberesih

To clean the console, use a soft, dry cloth. For stubborn smudges, slightly dampbilas lawon ku cai. Ulah nganggo bahan kimia anu kasar atanapi bahan anu kasar, sabab ieu tiasa ngaruksak layar atanapiasing.

5.2 Apdet parangkat lunak

Periodically check for software updates to improve performance, add features, or fix bugs. Instructions for updating the open-source Linux system can typically be found on community forums or the manufacturer's support page. Ensure the console is fully charged before attempting any updates.

6. Cara ngungkulan

If you encounter issues with your R36S console, refer to the following common problems and solutions:

• Konsol teu hurung:
  Ensure the console is fully charged. Connect it to a power source and wait a few minutes before attempting to power on again. Check that the system TF card is properly inserted.
• Games are not loading or appear corrupted:
  Verify that the game ROMs TF card is correctly inserted. Ensure the game files are in compatible formats for the respective emulators. Try re-inserting the game TF card.
• Layar teu responsif atanapi macet:
  Perform a hard reset by pressing and holding the Power button for approximately 10-15 seconds until the device powers off. Then, power it back on normally.
• Teu aya sora:
  Check the volume settings using the volume buttons. Ensure headphones are properly connected if in use.
• External display not working via OTG:
  Ensure the OTG adapter and HDMI cable are securely connected. Verify that the external display is set to the correct input source.

For persistent issues not covered here, please consult online communities or the manufacturer's support resources.

7. Spésifikasi Téknis

8. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan palanggan, mangga tingal dokuméntasi anu disayogikeun ku pameseran anjeun atanapi langsung ngahubungi pangecér / produsén. Simpen bukti pameseran anjeun pikeun klaim garansi.