Rowenta TN1603 Cordless Beard Trimmer User Manual

1. Parentah Kasalametan penting

PERHATOSAN: Do not use this appliance near water. Exercise extreme caution during use to prevent injury. Always ensure your hands are dry before handling the trimmer or charger.

• Baca sadaya parentah sateuacan nganggo alat.
• Jauhkeun alat ti barudak.
• Ulah neuleumkeun alat dina cai atawa cairan séjén.
• Entong nganggo alat upami rusak atanapi teu tiasa dianggo.
• Anggo ukur carjer anu disayogikeun sareng alatna.
• Cabut colokan alat sateuacan beberesih.

2. Produk Langkungview

2.1 Komponén

The Rowenta TN1603 Cordless Beard Trimmer comes with the following components:

• Trimmer Awak
• Multiple Comb Attachments (for various cutting lengths)
• Foil Shaver Kepala
• Kabel Ngecas (USB)
• Sikat beberesih
• Botol Minyak Pelumas

Image 2.1: The Rowenta TN1603 trimmer shown with all included accessories, including various comb attachments, a foil shaver head, charging cable, cleaning brush, and oil bottle.

2.2 Fitur konci

• Operasi tanpa kabel: Provides flexibility and ease of use without being tethered to an outlet.
• Wilah Asah Mandiri: Ensures long-lasting sharpness and consistent cutting performance.
• Daya Tahan Batré 120 Menit: Nawarkeun pamakéan nambahan dina muatan tunggal.
• bilah stainless steel: Durable and precise for effective trimming.
• Sababaraha Kantétan: Includes various comb guides and a foil shaver head for versatile grooming.

3. Setélan

3.1 Ngecas Trimmer

1. Pastikeun trimmer dipareuman.
2. Connect the charging cable to the trimmer's charging port.
3. Plug the USB end of the charging cable into a compatible USB power adapter (not included) or a USB port.
4. The charging indicator light will illuminate (typically green) to show that the trimmer is charging.
5. Allow approximately 120 minutes for a full charge. The indicator light may change or turn off when fully charged.

Gambar 3.1: Deukeut view of the Rowenta TN1603 trimmer's power button and charging indicator light, which glows green when charging.

3.2 Masang sareng Nyabut Asesoris

1. Ensure the trimmer is switched off before attaching or detaching any accessories.
2. To attach a comb attachment: Align the comb with the trimmer head and gently push it down until it clicks into place.
3. To detach a comb attachment: Gently pull the comb upwards from the trimmer head.
4. To attach the foil shaver head: Align the foil head with the trimmer body and push it firmly until it locks.
5. To detach the foil shaver head: Press the release buttons (if present) on the sides of the head and pull it away from the body.

Image 3.2: The Rowenta TN1603 trimmer shown with a comb attachment (left) and with the foil shaver head attached (right).

4. Parentah Operasi

4.1 Pangkas Dasar

1. Pastikeun trimmer dicas pinuh.
2. Attach the desired comb attachment for your preferred hair length.
3. Pencét tombol daya pikeun ngaktipkeun trimmer.
4. Tahan trimmer kalayan bilah nyanghareup wewengkon nu bakal dipangkas.
5. Pindahkeun trimmer ngalawan arah tumuwuhna bulu pikeun hasil pangalusna.
6. Saatos dianggo, pencét tombol daya pikeun mareuman trimmer.

Gambar 4.1: A close-up view of the Rowenta TN1603 trimmer head, showing the self-sharpening stainless steel blades.

4.2 Using the Foil Shaver Head

1. Ensure the trimmer is switched off and the foil shaver head is securely attached.
2. Hurungkeun trimmer.
3. Gently press the foil shaver head against your skin and move it in short, circular motions or straight lines.
4. This head is designed for a close shave on smaller areas or for finishing edges.
5. Sanggeus dipaké, mareuman trimmer.

5. Pangropéa

5.1 beberesih

1. Always ensure the trimmer is switched off and unplugged before cleaning.
2. Remove any comb attachments or the foil shaver head.
3. Use the provided cleaning brush to remove hair clippings from the blades and inside the trimmer head.
4. The blades can be rinsed under running water. Ensure they are completely dry before reattaching or storing.
5. Lap awak trimmer ku iklanamp cloth. Do not use abrasive cleaners or immerse the body in water.

5.2 Lubrication

1. After cleaning and drying the blades, apply 1-2 drops of the lubricating oil (provided) to the blades.
2. Hurungkeun trimmer pikeun sababaraha detik pikeun ngidinan minyak pikeun ngadistribusikaeun merata.
3. Wipe off any excess oil. Regular lubrication helps maintain blade performance and longevity.

5.3 Panyimpenan

Store the trimmer and its accessories in a cool, dry place, away from direct sunlight and moisture. Ensure the trimmer is clean and dry before storing.

6. Cara ngungkulan

7. Spésifikasi Téknis

• Jumlah modél: TN1603
• Sumber Daya: Ditenagakeun Batré (Bisa dieusi deui)
• Kahirupan batré: Nepi ka 120 menit
• Bahan sabeulah: Beusi sténless
• Fitur husus: Cordless, Self-sharpening
• warna: Hideung
• Ukuran produk (L x W x H): 31.5 x 23.5 x 24.8 cm (Note: These dimensions seem unusually large for a trimmer, likely packaging dimensions. Please refer to product packaging for exact device dimensions.)

8. Garansi jeung Rojongan

This Rowenta product is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.

For technical support, spare parts, or service inquiries, please visit the official Rowenta website or contact their customer service department. Contact information can typically be found on the Rowenta websitus atanapi dina dokuméntasi produk Anjeun.