PPLEE Wireless Vibrating Alarm Clock CR1027 User Manual

1. Bubuka

Thank you for choosing the PPLEE Wireless Vibrating Alarm Clock. This device is designed to provide a reliable and effective wake-up solution, especially for heavy sleepers, individuals with hearing impairment, or those who prefer a silent alarm. It features wireless vibration, dual alarms, multiple awake modes, and a rechargeable battery for portability and convenience.

Mangga baca manual ieu tuntas saméméh ngagunakeun produk pikeun mastikeun operasi ditangtoskeun jeung pikeun maksimalkeun pungsi fitur na.

Gambar 1: Hareupeun view of the PPLEE Wireless Vibrating Alarm Clock, displaying the time and alarm indicators.

2. Produk Langkungview

Eusi pakét:

• PPLEE Wireless Vibrating Alarm Clock
• Kabel Ngecas USB Tipe-C
• Manual pamaké

Tata perenah alat:

Gambar 2: Leuwihview of the alarm clock showing its compact size and key features like Dual Alarms, 12/24 Hour mode, Child Lock, USB Charger, Snooze, Battery Powered, 3 Awake Modes, and 3-Levels Vibration Strength.

The alarm clock features a clear LCD display on the front. Control buttons are located on the top and sides for easy access. A Type-C charging port is located on the side.

3. Setélan

3.1 Ngecas Alat

Before first use, fully charge the alarm clock. Connect the provided USB Type-C cable to the charging port on the device and plug the other end into a USB power adapter (not included) or a computer USB port. The battery indicator on the display will show charging status. A full charge takes approximately 4 hours and provides up to 3 months of operation.

Image 3: The alarm clock connected to a USB charging port, illustrating the Type-C connection.

3.2 Nyetél Waktos

1. Pencét éta TIME/SNOOZE tombol pikeun asup ka modeu setelan waktu. Angka jam bakal kedip-kedip.
2. Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun jam.
3. Pencét TIME/SNOOZE deui pikeun mastikeun jam sareng pindah ka setélan menit. Angka menit bakal kedip-kedip.
4. Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun menit.
5. Pencét TIME/SNOOZE to confirm the minutes and exit time setting.

Format 12/24 Jam:

While in time setting mode, press the SETTING GETER tombol pikeun ngaganti antara format 12 jam (AM/PM) sareng 24 jam.

Daylight Saving Time (DST) Function:

Pencét éta + button on the top of the clock to activate or deactivate the DST function. When activated, the time will automatically advance by one hour.

3.3 Nyetél Alarm (Alarm 1 & Alarm 2)

The clock supports two independent alarms. Follow these steps for each alarm:

1. Pencét éta ALARMA 1 or ALARMA 2 tombol pikeun milih alarm anu dipikahoyong. Waktos alarm bakal kedip-kedip.
2. Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun jam.
3. Pencét anu dipilih alarem pencét tombol deui pikeun mastikeun jam sareng pindah ka setélan menit.
4. Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun menit.
5. Pencét anu dipilih alarem button to confirm the minutes and exit alarm time setting.

Image 4: The alarm clock displaying two different alarm settings, one for a weekday and one for the weekend, illustrating the dual alarm functionality.

Weekday/Weekend Mode:

After setting the alarm time, use the WEEKDAY MODE switch (located on the side/back) to select the alarm schedule:

• SEN-JUM: Alarm activates Monday to Friday.
• SAPTU-MINGGU: Alarm activates Saturday and Sunday.
• Senén-Minggu: Alarm activates every day.

Selecting Awake Modes:

The alarm clock offers three awake modes: vibrate only, ring only, or vibrate + ring. Press the Modeu ALARM button (usually near the alarm setting buttons) repeatedly to cycle through these options. The corresponding icon will appear on the display.

Image 5: The alarm clock illustrating the three selectable alarm modes: Buzzer Sound & Vibration, Louder Buzzer Sound, and Vibration only.

Adjusting Vibration Strength:

The device has 3 levels of vibration strength (Low, Medium, High). Use the SETTING GETER switch/button to select your preferred intensity.

Image 6: Close-up of the alarm clock indicating the three vibration strength levels (L, M, H) via a switch.

Nyaluyukeun Volume Alarm:

If you select a ring or vibrate + ring mode, you can adjust the alarm volume. Use the VOLUME buttons (often combined with +/-, or a dedicated switch) to set the desired sound level. There are 5 adjustable volume levels.

Image 7: The alarm clock displaying adjustable alarm volume levels and different alarm types (Buzzer & Vibration, Vibrating, Buzzer).

4. Ngoperasikeun Jam Alarm

4.1 Fungsi Tunda

When an alarm sounds or vibrates, press the large SNOOZE/TIME button on the top of the clock to temporarily silence it. The alarm will reactivate after 9 minutes.

Image 8: The alarm clock with the snooze function activated, indicating a 9-minute delay before the alarm reactivates.

4.2 Fungsi Konci Anak

To prevent accidental changes to settings or to save battery power, activate the child lock. Locate the KUNCI ANAK switch (usually on the side or bottom) and slide it to the 'ON' position. This will disable most buttons.

Image 9: The alarm clock demonstrating the child lock feature, showing a small switch to enable or disable it.

4.3 Operasi Lampu Latar

The LCD display has a built-in backlight. The screen will automatically dim after 30 seconds to save power. Press any button to activate the backlight for clear viewdina kaayaan cahaya remen.

4.4 Optimal Placement for Vibration

For effective vibration, place the alarm clock in one of the following locations:

• Under your pillow.
• Under a fitted sheet.
• Between the mattress and box spring.

Image 10: Illustrations showing recommended placements for the vibrating alarm clock: under a pillow, under a fitted sheet, and between the mattress and box spring.

5. Pangropéa

5.1 beberesih

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface. Avoid exposing the device to excessive moisture.

5.2 Perawatan Batré

To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the low battery indicator appears. If storing the device for an extended period, charge it fully every few months.

6. Cara ngungkulan

• Alarm not activating:
  • Ensure the alarm is set correctly (time, AM/PM, weekday/weekend mode).
  • Check that the alarm mode (vibrate, ring, or both) is selected.
  • Verify the child lock is not engaged.
  • Pastikeun batréna geus dieusian.
• Tampilan taram atanapi kosong:
  • Press any button to activate the backlight.
  • Charge the device if the battery is low.
• Alat teu ngecas:
  • Check the USB Type-C cable for damage and ensure it is securely connected.
  • Coba adaptor atawa port USB anu béda.
• Time inaccuracy:
  • Reset the time manually.
  • Ensure the DST function is correctly set for your region.
• Tombol teu ngaréspon:
  • Check if the child lock is engaged.
  • Try resetting the device by pressing the RESET button (if available, often a small pinhole).

7. Spésifikasi

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

The PPLEE Wireless Vibrating Alarm Clock comes with a Garansi saumur hirupGaransi ieu nutupan cacad manufaktur sareng mastikeun kualitas sareng kinerja produk dina panggunaan normal.

8.2 Rojongan Palanggan

For any questions, technical assistance, or warranty claims, please contact PPLEE customer support through the retailer's platform or visit the official PPLEE website for contact information. Please have your model number (CR1027) and purchase details ready when contacting support.