1. Bubuka
This manual provides essential information for the safe and efficient operation of your ATOMSTACK A24 Pro Laser Engraver and Cutter. Please read this manual thoroughly before operating the machine and keep it for future reference.
The ATOMSTACK A24 Pro is a high-power 20W laser engraving and cutting machine, featuring a 0.06 x 0.06 mm ultra-fine laser focus area. It is designed for precise engraving and efficient cutting of various materials, including wood, acrylic, and certain metals, with cutting capabilities comparable to a 300W CO₂ laser engraving machine.
2. Pancegahan Kasalametan
Operating a laser machine requires strict adherence to safety guidelines to prevent injury and damage. Always prioritize safety.
- Perlindungan panon: The laser module includes a protective cover to shield the user's eyes. However, it is highly recommended to wear additional certified laser safety goggles during operation.
- Ventilasi: Pastikeun ventilasi nyukupan di wewengkon gawé pikeun dissipate haseup jeung haseup dihasilkeun salila ukiran sarta motong.
- Kasalametan Bahan: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or are highly flammable.
- Bahaya seuneu: Keep a fire extinguisher nearby. Never leave the machine unattended during operation.
- Barudak jeung Pets: Keep children and pets away from the machine during operation. The laser protective cover helps prevent accidental contact with the laser point.
- Sasayogian tanaga: Use only the provided power adapter. Ensure the power supply meets the machine's requirements (AC 100-240 V, 50/60 Hz, Output: 24 V, 5 A).
- Stopan Darurat: Familiarize diri jeung lokasi sarta fungsi tombol eureun darurat.
3. Komponén produk
The ATOMSTACK A24 Pro comes with the following components:
- 1 x ATOMSTACK A24 Pro Laser Engraving Machine Frame
- 1 x Laser Module
- 1 x Cable Chain
- 1 x Ngalereskeun Screw
- 1 x Set Alat
- 1 x Fixed Focus Film
- 3 x Acrylic Plates
- 3 x Wood Chips
- 10 x Dasi Kabel
- 1 x Desiccant
- 1 x Sikat
- 1 x Dust-free Cloth
- 1 x adaptor kakuatan
- 1 x Manual Pamaké (dokumén ieu)
- 1 x Kabel Data (USB)
Gambar: Leuwihview of the accessories and components included with the ATOMSTACK A24 Pro.
4. Setup Guide
The ATOMSTACK A24 Pro features a unibody aluminum alloy casting, requiring no complex installation. It is designed for immediate use.
- Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Pariksa karusakan naon waé salami transit.
- panempatan: Place the machine on a stable, level, and heat-resistant surface in a well-ventilated area. Ensure sufficient space around the machine for operation and material handling.
- Sambungan Daya: Connect the provided power adapter to the machine's power input and then to a suitable electrical outlet.
- Sambungan USB: Connect the machine to your computer using the supplied USB data cable.
- Pamasangan parangkat lunak: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. The machine supports Win XP/Win 7/Win 8/XP/Win 10 systems. Refer to the software's documentation for installation and setup.
- Pangaluyuan Fokus Tetep: The laser module features a fixed-focus design, eliminating the need for manual focus adjustment. For initial setup or specific material thickness, use the provided fixed focus film to ensure optimal laser performance.
Image: The ATOMSTACK A24 Pro laser engraver, ready for operation.
5. Parentah Operasi
This section outlines the general steps for operating your ATOMSTACK A24 Pro.
- Nyiapkeun Desain anjeun: Create or import your design using your chosen software (LaserGRBL, LightBurn). Supported file formats include NC, BMP, JPG, PNG, DXF.
- Penempatan Bahan: Place the material to be engraved or cut onto the working area of the machine. Ensure it is flat and securely positioned.
- Posisi: Utilize the cross-positioning system for precise and horizontal engraving. This system aids in visual edge finding and object alignment.
- Setélan parangkat lunak: Adjust laser power, speed, and passes in your software based on the material type and desired effect. The A24 Pro offers high precision (0.02 mm) and high-speed operation (up to 36000 mm/min).
- Mimitian Operasi: Once all settings are confirmed and safety precautions are in place, initiate the engraving or cutting process from your software.
- Ngawaskeun: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- Parantosan: After the process is complete, allow the material to cool if necessary before handling. Disconnect the machine from power when not in use.
Image: Cross positioning system for accurate material placement.
Image: High-speed engraving capability of the ATOMSTACK A24 Pro.
5.1. Kamampuh Ngukir jeung Motong
The ATOMSTACK A24 Pro is equipped with a 24W optical power laser module, utilizing second-generation fiber compression packaging technology for an ultra-fine laser spot of 0.06 x 0.06 mm. This allows for powerful cutting and fine engraving.
Image: Comparison of laser spot size, highlighting the A24 Pro's precision.
Image: Demonstration of the A24 Pro's high precision engraving.
Engravable Materials:
- Wood, Bamboo, Cardboard, Plastic, Leather, PCB, Aluminum Oxide, Non-reflective Electroplated and Painted Metal, 304 Mirror Stainless Steel, Glass, Ceramic, Cotton Cloth, Slate.
Cuttable Materials:
- Cardboard, Non-woven Fabrics, Wood Boards, Plywood (up to 20mm), Acrylic (transparent acrylic needs to be painted black, up to 30mm black acrylic), Some Thin Plastic Boards, Sponges, Aluminum and Stainless Steel (up to 0.05mm thick), and other metal sheets.
Gambar: Examples of maximum cutting thickness for various materials.
Image: Illustration of the long beam waist laser for enhanced deep cutting.
Image: Close-up of the Second Generation Packaged Blue Laser module.
6. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK A24 Pro.
- Ngabersihan lensa: The laser module features a dual-layer wind cover design to prevent the lens from being blocked or soiled. However, periodic inspection and gentle cleaning of the laser lens with the provided dust-free cloth are recommended to maintain laser efficiency.
- Ngaleungitkeun lebu: Regularly clean dust and debris from the machine's frame and moving parts using the provided brush or compressed air. Accumulation of dust can affect performance and lead to wear.
- Pelumasan Rel: Periodically check the X-axis guide rail for smooth movement. If necessary, apply a small amount of appropriate lubricant to ensure frictionless operation.
- Pembaruan firmware: Check the official ATOMSTACK website for any available firmware updates for the 32-bit motherboard to ensure you have the latest features and performance enhancements.
7. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tingali sareng solusi poténsialna.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin teu hurung. | Loose power connection, faulty power adapter, power outlet issue. | Pariksa sadaya sambungan daya. Cobi stop kontak anu béda. Pastikeun adaptor dayana jalan kalawan bener. |
| Laser teu firing atawa kaluaran lemah. | Dirty laser lens, incorrect focus, low power setting in software, laser module issue. | Clean the laser lens. Verify focus using the fixed focus film. Increase laser power in software. Contact support if the issue persists. |
| Engraving/cutting results are inconsistent or inaccurate. | Material not flat/secure, incorrect speed/power settings, loose belts/components, software error. | Ensure material is flat and secured. Adjust speed and power settings. Check for any loose mechanical parts. Restart software and machine. |
| Software not connecting to the machine. | USB cable issue, driver not installed, incorrect COM port selected, software conflict. | Try a different USB port or cable. Ensure USB drivers are installed. Select the correct COM port in software. Close other applications. |
8. Spésifikasi Téknis
| Fitur | Spésifikasi |
|---|---|
| Modél produk | ATOMSTACK A24 Pro |
| Engraving Dimensions | 370 x 310 mm |
| Kakuatan Mesin | 120 W |
| Laser Optical Output Power | 24 W |
| Panjang gelombang laser | 455 ± 5 méter pasagi |
| Ukiran Precision | 0.02 mm |
| Métode Fokus | Fixed focus laser, no focus adjustment needed |
| Laser Protection Cover | Yes, integrated cover to protect eyes |
| Parangkat Lunak Operasi | LaserGRBL, LightBurn |
| Sistem Operasi anu Dirojong | Win XP/Win 7/Win 8/XP/Win 10 |
| Dirojong File Formulir | NC, BMP, JPG, PNG, DXF |
| Métode Transfer Data | Sambungan USB |
| Sasayogian tanaga | International Standard Input: AC 100-240 V, 50/60 Hz; Output: 24 V, 5 A |
| Sertifikasi | CE, FCC, RoHS, FDA, PSE |
| Ukuran produk (L x W x H) | 64 x 35 x 13 cm |
| Beurat produk | 8.12 kg |
9. Émbaran jaminan
ATOMSTACK products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official ATOMSTACK website. Typically, products are eligible for a refund or replacement within 30 days of purchase, subject to the seller's return policy.
10. Rojongan Palanggan
If you encounter any issues or have questions not covered in this manual, please contact ATOMSTACK customer support. Refer to the contact information provided on the product packaging or the official ATOMSTACK websitus pikeun saluran rojongan paling up-to-date.
When contacting support, please have your product model (ATOMSTACK A24 Pro) and serial number (if applicable) ready.
