1. Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MARSTEK Smart Circuit Breaker HF-00095. This device offers adjustable overvoltage, undervoltage, and overcurrent protection, along with energy monitoring capabilities, to safeguard your electrical equipment.
2. Émbaran Kasalametan penting
Please read and understand all safety instructions before installing or operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Pamasangan ngan ukur kedah dilakukeun ku tukang listrik anu mumpuni.
- Ensure all power to the circuit is disconnected at the main breaker before installation or maintenance.
- Entong jalankeun alat upami katingalina ruksak.
- Patuh kana sadaya kode sareng peraturan listrik lokal.
- This device is designed for AC circuits within specified voltage jeung rentang ayeuna.
3. Produk Langkungview jeung Fitur
The MARSTEK Smart Circuit Breaker HF-00095 is designed to provide intelligent protection and monitoring for your electrical circuits. It features a digital display for real-time voltage and current, and allows for customizable protection settings.
- Real-Time Voltage tampilan: Némbongkeun vol ayeunatage.
- Real-Time Current Display: Némbongkeun arus amperage.
- Work Indicator Lights: Indicate operational status and protection events.
- Tombol SET: Long press to enter settings mode.
- Tombol luhur jeung handap: Used to adjust overvoltage, undervoltage, and overcurrent values.
- Manual Power Off Button: Allows for manual disconnection of the circuit.
fitur konci ngawengku:
- Tailored Protection: Customize overvoltage, undervoltage, and overcurrent values to suit specific requirements.
- Setélan standar: Pre-set values for convenience - Overvoltage Trip at 140V, Undervoltage Trip at 90V, and Overcurrent Trip at 63A.
- Intelligent Recovery: After power events, the circuit automatically restores itself within 30 seconds, ensuring continuous power supply.
- Setélan anu ramah-pamaké: Clear setting instructions are provided on the product's side for quick adjustments.
4. Spésifikasi Téknis
| Parameter | Nilai |
|---|---|
| Terminal suplai | N, L |
| Dipeunteun Supply Voltage | AC 110V; DC 85-300V |
| Frékuénsi dipeunteun | 40/50/60 / 70Hz |
| >U Setting Range (Overvoltage) | AC130-300V; DC130-300V |
| <U Setting Range (Undervoltage) | AC80-210V; DC85-210V |
| Voltage Histeresis | 5V |
| Overvoltage Tunda perjalanan | 0.5s |
| Voltage Akurasi | <1% |
| Max. Operating Phase Voltage | 350V |
| Max. Operasi Ayeuna | 40A / 63A |
| Luhurna | ≤2000m |
| Fungsi | Panangtayungan kilat |
| Kalembaban Relatip Diidinan | ≤50% at 40°C (Without Condensation) |
| Suhu Ambient | -25°C ~ +55°C |
| Beurat bersih | 159g |
| Ukuran | 81 * 36 * 66 mm |
5. Instalasi jeung Wiring
Proper installation is crucial for the safe and effective operation of the MARSTEK Smart Circuit Breaker. Refer to the wiring diagram below and follow all safety precautions.
Léngkah-léngkah pamasangan:
- Pegatkeun daya: Before starting any electrical work, ensure all power to the circuit is completely disconnected at the main service panel. Verify with a voltage panguji.
- Pamasangan: Mount the circuit breaker securely in a suitable electrical enclosure or panel. The device is designed for DIN rail mounting or screw mounting.
- Wiring Input: Connect the incoming Neutral (N) wire to the terminal marked 'N IN' and the incoming Live (L) wire to the terminal marked 'L IN'.
- Wiring kaluaran: Connect the outgoing Neutral (N) wire from the terminal marked 'N OUT' and the outgoing Live (L) wire from the terminal marked 'L OUT' to the load you wish to protect.
- Sambungan Aman: Ensure all terminal screws are tightened securely to prevent loose connections, which can cause overheating or intermittent operation.
- Pamulihan kakuatan: Once all connections are verified and secure, restore power to the circuit at the main service panel.
6. Operation and Parameter Settings
Upon power-up, the device will display real-time voltage and current. You can adjust the protection parameters to suit your specific needs.
Adjusting Protection Parameters:
- Lebetkeun Setélan: Pencét panjang SET button until the display changes, indicating entry into the settings menu.
- Navigasi Parameter: Ngagunakeun éta Up (▲) jeung Turun (▼) buttons to cycle through the available parameters (e.g., overvoltage trip value, undervoltage trip value, overcurrent trip value, recovery delay time).
- Pilih Parameter: Pencét éta SET button briefly to select the currently displayed parameter for adjustment.
- Saluyukeun Nilai: Ngagunakeun éta Up (▲) jeung Turun (▼) buttons to change the parameter's value.
- Konfirmasi sareng Kaluar: Pencét SET again to confirm the new value and move to the next parameter. To exit the settings menu at any time, long press the SET kancing.
Default Protection Settings:
- Overvoltage lalampahan: 140V
- Undervoltage lalampahan: 90V
- Overcurrent Trip: 63A
- Automatic Recovery Delay: 30 seconds
Fungsi Reset Otomatis:
Upami aya overvoltatage, undervoltage, or overcurrent condition, the circuit breaker will automatically cut off power to protect the connected load. After a default delay of 30 seconds, the device will attempt to restore power. If the fault condition persists, it will remain disconnected and attempt to reset again after another delay.
- Upon detection of overvoltage, undervoltage, or overcurrent, the circuit is cut off.
- A default delay of 30 seconds begins.
- After 30 seconds, the circuit attempts to reset automatically. If the abnormality is resolved, power is restored. If the abnormality persists, the device continues to wait before another reset attempt.
7. Pangropéa
The MARSTEK Smart Circuit Breaker HF-00095 requires minimal maintenance to ensure optimal performance and longevity.
- Inspeksi rutin: Periodically inspect the device for any visible damage, discoloration, or loose wiring connections. Address any issues promptly.
- beberesih: Ensure the ventilation openings are clear of dust and debris to prevent overheating. Clean the display and exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids directly on the device.
- Kaayaan Lingkungan: Ensure the device operates within the specified ambient temperature and humidity ranges to prevent malfunction.
8. Cara ngungkulan
If you encounter issues with your MARSTEK Smart Circuit Breaker, refer to the following troubleshooting guide:
- Alat teu hurung:
- Check if the main circuit breaker supplying power to the device is in the ON position.
- Verify that the input (IN) wiring connections are secure and correctly wired.
- Mastikeun suplai voltage is within the rated range (AC 110V; DC 85-300V).
- Circuit trips frequently:
- Review your set overvoltage, undervoltage, and overcurrent parameters. Ensure they are appropriate for your connected load and typical operating conditions.
- Check for actual electrical faults (e.g., short circuits, overloads) in the connected circuit or appliance.
- Ensure the load current does not exceed the maximum operating current (63A).
- Display not showing correct values or is blank:
- Pastikeun sadaya sambungan kabel aman sareng leres.
- If the issue persists after checking connections and power, the device may require service.
- Device does not reset automatically:
- Ensure the fault condition (overvoltage, undervoltage, overcurrent) has been resolved. The device will not reset if the fault persists.
- Check the automatic recovery delay setting.
9. Garansi jeung Rojongan
For detailed warranty information regarding your MARSTEK Smart Circuit Breaker HF-00095, please refer to the product packaging or visit the official MARSTEK websitus.
For technical support, troubleshooting assistance, or any other inquiries, please contact MARSTEK customer service through their official contact channels, which can typically be found on their websitus atanapi dokuméntasi produk.
