Produk Leuwihview
The SRAM SX Eagle 12-Speed Rear Derailleur is an integral component of the SRAM Eagle Ecosystem, offering 12-speed compatibility for a wide range of cycling applications. It incorporates X-SYNC pulley technology, which contributes to greater efficiency, crisper shifting, and quieter operation. Designed for durability, this derailleur features a robust construction, including a steel cage, making it resilient against impacts. The Cage Lock feature facilitates easy wheel removal for maintenance or transport. This derailleur is engineered to provide reliable performance for various riding conditions.

Gambar 1: Hareupeun view of the SRAM SX Eagle 12-Speed Rear Derailleur, showcasing its robust design and pulley system.
Instalasi jeung Setup
Proper installation is crucial for optimal performance and longevity of your SRAM SX Eagle rear derailleur. Follow these steps carefully:
- Alat anu diperyogikeun: Hex keys (typically 5mm), cable cutters, cable crimps, chain whip, cassette lockring tool, torque wrench.
- Pasang Derailleur: Ensure your derailleur hanger is straight and undamaged. Thread the derailleur onto the hanger by hand, then tighten the mounting bolt to the manufacturer's specified torque (refer to SRAM's official documentation for precise torque values).
- Routing kabel: Route the shifter cable through the frame and derailleur according to your bicycle's design. Ensure there are no sharp bends or kinks in the cable housing.
- Cable Attachment: Pull the cable taut and secure it to the derailleur's cable anchor bolt. Trim excess cable and install a cable crimp.
- Pangaluyuan Sekrup Wates: Adjust the High (H) and Low (L) limit screws to prevent the chain from shifting beyond the smallest and largest cogs of the cassette. The H-screw limits outward movement, and the L-screw limits inward movement.
- Pangaturan Tegangan-B: With the chain on the largest cog and smallest chainring, adjust the B-tension screw so that the upper pulley of the derailleur is at the optimal distance from the largest cog. This distance is typically indicated by a guide mark on the derailleur or in SRAM's official manual.
- Indexing: Fine-tune the shifting by adjusting the barrel adjuster on the shifter or derailleur. Shift through all gears to ensure smooth and precise transitions.

Gambar 2: Sisi view of the SRAM SX Eagle 12-Speed Rear Derailleur, highlighting the cage and pulley wheels.
Parentah Operasi
The SRAM SX Eagle 12-Speed Rear Derailleur operates in conjunction with a compatible 12-speed shifter and cassette. Shifting is performed by actuating the shifter lever, which pulls or releases the derailleur cable, moving the derailleur across the cassette cogs.
- Upshifting (to smaller cogs): Push the smaller lever on your shifter to move the chain to a smaller, harder-to-pedal cog.
- Downshifting (to larger cogs): Push the larger lever on your shifter to move the chain to a larger, easier-to-pedal cog.
- Pergeseran anu mulus: For optimal performance and to prevent chain wear, ease off the pedal pressure slightly when shifting. Avoid shifting under heavy load.
Pedoman Pangropéa
Regular maintenance will extend the life and performance of your derailleur:
- beberesih: After each ride, especially in wet or dirty conditions, clean the derailleur pulleys and cage with a brush and degreaser. Rinse thoroughly and dry.
- Lubrication: Apply a suitable chain lubricant to your chain regularly. Ensure the lubricant reaches the inner plates and rollers. Wipe off excess lubricant.
- Pamariksaan: Periodically check the derailleur for any signs of damage, bent components, or loose bolts. Ensure the cable is free of fraying and the housing is intact.
- Hanger Alignment: A bent derailleur hanger is a common cause of poor shifting. If shifting issues persist after adjustments, have your hanger checked and aligned by a qualified bicycle mechanic.
Ngarengsekeun Masalah Umum
Ieu sababaraha masalah umum sareng solusi poténsialna:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Slow or hesitant shifting | Cable tension too low, dirty cable/housing, bent derailleur hanger | Increase cable tension with barrel adjuster, clean/replace cable/housing, check/align hanger |
| Chain drops off smallest/largest cog | Limit screws incorrectly set | Adjust H or L limit screw |
| Noisy drivetrain | Insufficient lubrication, incorrect B-tension, worn chain/cassette | Lubricate chain, adjust B-tension, inspect/replace worn components |
| Derailleur cage hits chainstay | Incorrect B-tension, bent derailleur hanger | Adjust B-tension, check/align hanger |
Spésifikasi teknis
| Spésifikasi | Nilai |
|---|---|
| merek | SRAM |
| Ngaran modél | C8C088 |
| Nomer Bagian | 00.7518.155.000 |
| Kecepatan Drivetrain | 12 |
| Warna | Hideung |
| Bahan | Aluminum (Case Material) |
| Item Beurat | 1 Pon (0.45 kg) |
| Item Ukuran (L x W x H) | 5.91 x 5.91 x 3.94 inci |
| Tipe Pamasangan | Pemasangan Braze-On |
| UPC | 710845865206 |
Garansi sareng Rojongan
The SRAM SX Eagle 12-Speed Rear Derailleur comes with a 2 Taun Produsén Garansi. For detailed warranty information, product support, or to explore other SRAM products, please visit the official SRAM Store.
SRAM Store: https://www.amazon.com/stores/SRAM/page/9190A6BD-F3B9-429D-8216-125774D5F0C5





