LEHMANN LGALM-2642

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower User Manual

Model: LGALM-2642

1. Émbaran Kasalametan

Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
  • Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
  • Ulah ngajalankeun mower dina jukut baseuh atawa hujan.
  • Clear the area of objects such as rocks, toys, and wires before mowing.
  • Never allow children or untrained individuals to operate the lawn mower.
  • Isi ulang bahan bakar di tempat anu ventilasina saé kalayan mesin pareum sareng tiis. Ulah ngaroko nalika ngisi bahan bakar.
  • Always disconnect the spark plug wire before performing any maintenance or cleaning.

2. Setup jeung Majelis

Turutan léngkah-léngkah ieu pikeun nyiapkeun mower padang rumput hejo anjeun pikeun dianggo munggaran.

2.1 Ngabongkar bungkusan

Kaluarkeun sadaya komponén tina bungkusna kalayan ati-ati. Pastikeun sadaya bagian aya numutkeun daptar bungkusna.

2.2 Nanganan Majelis

  1. Unfold the handle and secure it in the operating position using the provided knobs or levers.
  2. Pastikeun sadaya kabel dipasang kalayan leres sareng henteu kajepit.

2.3 Nambahkeun Oli Mesin

The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.

  • Teundeun mower dina permukaan datar.
  • Teang tutup eusian oli/dipstick.
  • Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
Hand pouring oil into the lawn mower engine.
Gambar 2.3.1: A hand carefully pouring engine oil into the oil fill opening of the lawn mower. This step is essential before the first use to ensure proper engine lubrication.

2.4 Nambahan Suluh

Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

  • Pastikeun mesin pareum sareng tiis.
  • Buka tutup tanki bahan beuleum.
  • Fill the fuel tank, leaving a small space for expansion.
  • Tutup pageuh tutup tangki bahan bakar.

2.5 Kantong Pangumpulan Jukut

Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower with oil and spare blades.
Gambar 2.5.1: Hiji leuwihview of the LEHMANN LGALM-2642 lawn mower, including the grass collection bag, engine, and handle. Also shown are a bottle of engine oil and two cutting blades, one red and one black.

3. Parentah Operasi

Biasakeun kontrol sareng prosedur operasi sateuacan ngamimitian mesin.

3.1 Mimitian Mesin

  1. Ensure the fuel tank is filled and engine oil is at the correct level.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. Pindahkeun tuas gas ka posisi 'START' atawa 'CHOKE'.
  4. Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
  5. Once the engine starts, gradually move the throttle lever to the 'RUN' position.
Hand pulling the starter cord of the lawn mower.
Gambar 3.1.1: A hand pulling the starter cord to initiate the engine of the lawn mower.

3.2 Nyaluyukeun jangkungna motong

The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.

  • Ensure the engine is off and the blade has stopped rotating.
  • Locate the height adjustment levers, typically near the wheels.
  • Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.
Close-up of the lawn mower's cutting height adjustment mechanism, showing settings from 2.5 cm to 7 cm.
Gambar 3.2.1: A lengkep view of the lawn mower's cutting height adjustment, illustrating the five available settings from 2.5 cm (25 mm) to 7 cm (70 mm).
Hand adjusting the cutting height lever on the lawn mower.
Gambar 3.2.2: A hand manipulating the red lever on the side of the lawn mower to adjust the cutting height.

3.3 Kalibet Self-Propulsion

This model features self-propulsion for easier operation.

  • With the engine running, engage the self-propel lever (usually located on the handle).
  • The mower will begin to move forward. Release the lever to disengage self-propulsion.
Person operating the LEHMANN LGALM-2642 self-propelled lawn mower on a green lawn.
Gambar 3.3.1: A person demonstrating the use of the LEHMANN LGALM-2642 self-propelled lawn mower, pushing it across a well-maintained lawn.

3.4 Emptying the Grass Bag

Regularly check and empty the grass collection bag to maintain optimal cutting performance.

  • Stop the engine and wait for the blade to stop completely.
  • Lift the rear discharge flap and carefully remove the grass bag.
  • Empty the grass clippings into a suitable container.
  • Reattach the grass bag securely.
Hand removing the grass collection bag from the lawn mower.
Gambar 3.4.1: A hand detaching the grass collection bag from the rear of the lawn mower, ready for emptying.

3.5 Ngeureunkeun Mesin

To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.

4. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina mesin pemotong rumput anjeun.

4.1 beberesih

  • Saatos unggal dianggo, bersihan handapeun dek mesin motong jukut pikeun nyegah panumpukan jukut.
  • This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
  • Bersihkeun luar nganggo iklanamp cloth. Do not use high-pressure washers directly on the engine or electrical components.
Close-up of the water hose connection point on the lawn mower deck and the blade being cleaned by water.
Gambar 4.1.1: A lengkep view showing the water hose connection on the mower deck, designed for easy cleaning of the blade and underside with water.

4.2 Kamanusaan sarta Studi agul

  • Regularly inspect the blade for sharpness and damage. A dull blade tears grass, leading to an unhealthy lawn.
  • If the blade is dull, have it sharpened or replaced by a qualified service technician.
  • Always disconnect the spark plug wire before inspecting or working on the blade.
Close-up of the red cutting blade inside the mower deck.
Gambar 4.2.1: A nutup-up view of the red cutting blade within the mower deck, highlighting its design for efficient grass cutting.

4.3 Robah Oli Mesin

Ganti oli mesin saatos 5 jam mimiti operasi, teras unggal 25 jam atanapi unggal taun, mana waé anu langkung tiheula.

  • Hurungkeun mesin salami sababaraha menit pikeun manaskeun oli.
  • Ngeureunkeun mesin sarta pegatkeun sambungan kabel busi.
  • Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
  • Remove the drain plug (or fill cap) and allow the oil to drain completely.
  • Replace the drain plug and refill with the recommended amount and type of new engine oil.

4.4 Air Filter Inspection and Cleaning

Inspect the air filter regularly and clean or replace it as needed to ensure proper engine performance.

Close-up of the lawn mower engine, showing the air filter cover.
Gambar 4.4.1: A nutup-up view of the lawn mower's engine, with a focus on the air filter housing, which requires regular inspection and cleaning.

4.5 Inspeksi Spark Plug

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.

Hand connecting the spark plug cap to the engine.
Gambar 4.5.1: A hand carefully connecting the spark plug cap to the engine, a routine maintenance task.

4.6 Panyimpenan

For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.

5. Cara ngungkulan

Bagian ieu alamat masalah umum Anjeun bisa sapatemon jeung mower padang rumput hejo Anjeun.

MasalahMungkin Cukang lantarananaSolusi
Mesin moal ngamimitian
  • Taya suluh atawa suluh bulukan
  • Engine oil level too low
  • Kawat busi dipegatkeun
  • Saringan hawa mampet
  • busi lepat
  • Fill with fresh fuel
  • Pariksa jeung tambahkeun minyak
  • Sambungkeun kawat busi
  • Ngabersihan / ngaganti saringan hawa
  • Pariksa / ngaganti busi
Motong motong henteu rata
  • Sabeulah kusam atawa ruksak
  • Uneven cutting height adjustment
  • Excessive grass buildup under deck
  • Ngasah atawa ngaganti sabeulah
  • Ensure all wheels are set to the same height
  • Clean mower deck
Geter kaleuleuwihi
  • Sabeulah bengkok atawa henteu saimbang
  • Loose engine mounting bolts
  • Inspect and replace blade if bent; balance if dull
  • Kencangkeun sadayana baud
Self-propulsion not engaging
  • Sabuk drive leupas atawa ruksak
  • Control cable adjustment
  • Inspect and replace drive belt
  • Adjust or replace control cable

6. Spésifikasi

Key technical details for the LEHMANN LGALM-2642 Lawn Mower.

Diagram showing the dimensions of the LEHMANN LGALM-2642 lawn mower.
Gambar 6.1.1: A diagram illustrating the key dimensions of the LEHMANN LGALM-2642 lawn mower, including length (139 cm), width (48 cm), and height (103 cm).
FiturRincian
Nomer modélLGALM-2642
Tipe Mesin146 cm³ OHV Internal Combustion Engine
Daya Mesin3.49 hp (2.6 kW)
Lebar motong42 cm
Motong adjustment Jangkungna5 levels (25 mm - 70 mm)
Kapasitas Kantong Jukut40 liter
Disarankeun padang rumput hejo AreaNepi ka 2000 m²
Modeu OperasiSelf-Propelled (Automatic)
BahanAlloy Steel
Item Beurat29 kg
Ukuran produk (L x W x H)Approx. 139 cm x 48 cm x 103 cm (assembled)

7. Garansi jeung Rojongan

LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.

7.1 Rojongan Palanggan

If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN websitus pikeun detil kontak.

When contacting support, please have your model number (LGALM-2642) and purchase date available.

Dokumén Patali - LGALM-2642

Praview Lehmann Firmware Updater: Parentah Operasi pikeun Konci sareng Pamiarsa RFID
Dokumén ieu nyayogikeun pitunjuk operasi pikeun parangkat lunak LEHMANN Firmware Updateater, ngajéntrékeun cara ngapdet firmware dina konci Lehmann, pamaca RFID, sareng terminal. Ngawengku syarat sistem, produk anu cocog, sareng pituduh léngkah-léngkah.
Praview LEHMANN Manajemén Software Guide pamaké: Konfigurasi sarta Operasi
Buku pituduh komprehensif pikeun LEHMANN Management Software (LMS), detailing konfigurasi, operasi, jeung manajemen sistem LEHMANN RFID dina mode offline boh online. Nyertakeun transponder sareng manajemén konci, setélan pangguna, sareng administrasi sistem.
Praview LEHMANN CNC Rotary Tables - Edition Katalog Utama 4 | PGD, E, DD Series
Edisi Katalog Utama LEHMANN 4 pikeun Tables Rotary CNC. Jelajahi PGD, E-Series, DD Series, sareng seueur deui. Leyuran-speed tinggi, backlash-gratis pikeun automation industri jeung manufaktur precision.
Praview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronische Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Praview LEHMANN Primary und Secondary Controller Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installation, Konfiguration und Wartung der LEHMANN Primary und Secondary Controller für das Captos und Captos iCharge RFID-Schließsystem.
Praview Pitunjuk Operasi Konci Loker Éléktronik LEHMANN M610 LEGIC L043-A03
Pitunjuk operasi anu lengkep pikeun konci loker éléktronik LEHMANN M610 LEGIC L043-A03, anu ngawengku pamasangan, pamrograman, operasi, pangropéa, sareng ngungkulan masalah.