Waveshare Industrial Grade Serial Server User Manual

1. Produk Langkungview

The Waveshare Industrial Grade Serial Server is a versatile device data acquisitor and IoT gateway designed for robust industrial environments. It integrates multiple functionalities including a serial server, Modbus gateway, MQTT gateway, and serial port to HTTPD Client. Equipped with RS232, RS485, WiFi, and Ethernet interfaces, this module facilitates seamless communication such as serial port to WiFi, serial port to Ethernet, and Ethernet to WiFi.

fitur konci ngawengku:

• Multi-functional Integration: Combines serial server, Modbus gateway, MQTT gateway, and serial port to HTTPD Client.
• Konéktipitas Fleksibel: Supports RS232, RS485, WiFi, and Ethernet interfaces for diverse application scenarios.
• Input kakuatan lebar: Onboard multiple power supply interfaces supporting 6~36V wide range power supply, with optional PoE function.
• Desain Kelas Industri: Features a durable metal case, supporting both wall-mount and rail-mount installations for easy integration into industrial setups.
• Aplikasi: Ideal for data acquisition, IoT gateway solutions, safety & security IoT, and intelligent instrument monitoring.

Figure 1: Waveshare Industrial Grade Serial Server

2. Eusi Paket

Pariksa heula sadaya barang anu didaptarkeun di handap ieu kalebet kana pakét anjeun. Upami aya barang anu leungit atanapi ruksak, mangga ngahubungi vendor anjeun.

Gambar 2: Eusi pakét

• Waveshare Industrial Grade Serial Server Unit
• Antena WiFi
• Wall-mount/Rail-mount Bracket
• Obeng
• Pasangan Sekrup (4x)

Note: The power supply is not included. A 12V power adapter is recommended for use if not utilizing PoE.

3. Spésifikasi

Detailed technical specifications for the Waveshare Industrial Grade Serial Server.

Gambar 3: Spésifikasi Produk Di Luhurview

4. Setup Guide

4.1 Instalasi fisik

The device supports both wall-mount and rail-mount installations. Use the provided bracket and screws to secure the unit in your desired location. Ensure adequate ventilation around the device.

Figure 4: Interface Introduction and Dimensions

4.2 Sambungan Daya

The device offers flexible power options:

• PoE (Power over Ethernet): If your network infrastructure supports 802.3af PoE, connect an Ethernet cable from a PoE-enabled switch or injector to the device's RJ45 Ethernet port. This will power the device and provide network connectivity simultaneously.
• Input Daya DC: Alternatively, connect a DC power adapter (6~36V recommended, 12V typical) to the DC 5.5 power port or use the screw terminal for direct wiring. Ensure correct polarity when using the screw terminal (GND and 6-36V).

Figure 5: Multi Power Supply Methods

4.3 Serial Port Connection (RS232/RS485)

• RS232: Connect your RS232 device to the DB9 male connector. Refer to the pinout diagram (Figure 4) for correct wiring.
• RS485: Connect your RS485 device to the A and B terminals on the screw terminal block. Ensure proper A/B polarity for communication.

4.4 Network Connection (Ethernet/WiFi)

• Ethernet: Connect an Ethernet cable from your network switch or router to the RJ45 Ethernet port.
• Wifi: Screw the provided WiFi antenna onto the SMA connector. The device can operate in various WiFi modes (AP, STA, AP+STA) which are configured via the web interface or serial commands.

5. Modeu Operasi sareng Konfigurasi

The Waveshare Serial Server supports a variety of operating modes to suit different application needs. Configuration is primarily done via a web interface or AT commands through the serial port.

5.1 Aksés Awal jeung Konfigurasi

To access the device's web interface for configuration:

1. Ensure the device is powered on and connected to your network (via Ethernet or WiFi).
2. The default IP address for the WiFi interface is typically 10.10.100.254. Ensure your computer is on the same subnet for initial access.
3. Buka a web browser and enter the device's IP address (e.g., http://10.10.100.254).
4. Log in using the default credentials (refer to the full manual or product documentation for default username/password, if any).
5. Ti web interface, you can configure network settings (IP address, subnet, gateway), serial port parameters (baud rate, data bits, parity, stop bits), and select the desired operating mode.

Note: Some advanced configurations or troubleshooting may require using specific software tools (e.g., SSCOM) or AT commands via a serial terminal. Refer to the manufacturer's detailed documentation for comprehensive AT command sets.

5.2 Supported Operating Modes

The device supports various modes for data transmission and network integration:

• Transparent Transmission Mode: Allows direct, transparent data transfer between serial and network interfaces (TCP Server, TCP Client, UDP Server, UDP Client).
• Modbus Gateway: Converts Modbus RTU/ASCII to Modbus TCP, enabling Modbus devices to communicate over Ethernet/WiFi.
• MQTT Gateway: Facilitates communication with MQTT brokers, allowing serial data to be published to or subscribed from MQTT topics.
• Serial Port to HTTPD Client: Enables the device to send serial data to an HTTP server via HTTP POST/GET requests.
• Modeu WiFi:
  • Mode AP: The device acts as an Access Point, allowing other WiFi devices to connect to it.
  • Modeu STA: The device connects to an existing WiFi network as a client.
  • AP+STA Mode: The device operates as both an Access Point and a client simultaneously.
• Wired + Wireless Networking Applications: Supports APLAN, APWAN, Router, and Bridge modes for complex network setups.

Figure 6: Transmission and Wireless Networking Modes

Figure 7: Wired and Wireless Networking Methods

6. Pangropéa

To ensure optimal performance and longevity of your Waveshare Industrial Grade Serial Server, follow these maintenance guidelines:

• beberesih: Periodically clean the device's exterior with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Pembaruan firmware: Check the Waveshare official website for any available firmware updates. Keeping the firmware updated can improve performance, add new features, and resolve potential issues. Follow the provided instructions carefully when performing updates.
• Kaayaan Lingkungan: Ensure the device operates within its specified temperature and humidity ranges (-40°C ~ 85°C, 5-95% relative humidity). Avoid exposing the device to excessive dust, moisture, or direct sunlight.
• Manajemén Kabel: Ensure all connected cables (serial, Ethernet, power) are securely fastened and not under strain to prevent accidental disconnections or damage.

7. Cara ngungkulan

This section addresses common issues you might encounter with the Waveshare Industrial Grade Serial Server.

8. Garansi jeung Rojongan

Waveshare products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Waveshare websitus.

For technical support, troubleshooting assistance, or to download the latest drivers and firmware, please visit the Waveshare official support page or contact their customer service directly. When contacting support, please have your product model number (RS232/485 TO W-FI POE ETH (B)) and purchase details ready.

Official Waveshare Websitus: www.waveshare.com