Buku Panduan Pangguna Sistem Komunikasi Headset Bluetooth Motor Sena 10S

1. Produk Langkungview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Fitur konci:

• Bluetooth 4.1 sareng Universal Intercom pikeun kompatibilitas anu lega.
• Audio HD anu jernih pisan kalayan Kontrol Noise Canggih pikeun kualitas sora anu unggul.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Gambar 1.1: Hareupeun view of the Sena 10S Motorcycle Bluetooth Headset.

2. Eusi Paket

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Spéker Set
• Mikropon Boom
• Mikropon kabel
• Pamasangan Clamp Kit
• USB Power & Kabel Data
• Kabel Audio
• Velcro Pads pikeun Speaker
• Spons Mikropon

Figure 2.1: All components included in the Sena 10S package.

3. Setup jeung Instalasi

3.1 Ngecas Alat

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Gambar 3.1: Sisi view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Loosen nu screws dina tonggong cl nuamp hijian.
2. Ngageser clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Parentah Operasi

4.1 Daya Hurung/Pareuman

• Daya Hurung: Pencét terus tahan Tombol Telepon sareng Jog Dial salami 1 detik.
• Pareum listrik: Ketok Tombol Telepon sareng Jog Dial sacara babarengan.

4.2 Volume Control

Puterkeun Jog Dial searah jarum jam pikeun ningkatkeun volume sareng berlawanan arah jarum jam pikeun ngirangan volume.

4.3 Ngapasangkeun Bluetooth (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. Dina telepon pinter anjeun, aktipkeun Bluetooth teras milarian alat-alatna.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Komunikasi Interkom

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Puter/Reureuh Musik: Pencét jeung tahan Jog Dial salila 1 detik.
• Ngajawab / mungkas Telepon: Ketok Tombol Telepon.
• Dial sora: Pencét jeung tahan Tombol Telepon salila 3 detik.

5. Pangropéa sarta perawatan

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Tetep alat tetep garing. Uap bisa ngaruksak sirkuit internal.
• Ulah make bahan kimia kasar, pangleyur beberesih, atawa deterjen kuat pikeun ngabersihan alat.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Simpen alat dina tempat anu tiis sareng garing upami henteu dianggo.
• Ngeusi batre rutin, sanajan teu dipake, pikeun ngajaga kaséhatan batré.

6. Cara ngungkulan

If you encounter issues with your Sena 10S, try the following steps:

• Henteu aya kakuatan: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Taya Sora/Polumeu Lemah: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Interkom Teu Nyambung: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Pegatkeun sambungan Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• Ngareset Alat: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Spésifikasi Téknis

8. Video Produk Resmi

9. Garansi jeung Rojongan

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.