Danfoss 077B2317L

Danfoss Thermostat 25T65 077B2317L Freezer Instruction Manual

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of the Danfoss Thermostat 25T65 077B2317L. This component is designed as a replacement part for various freezer and combined refrigerator models. Please read these instructions carefully before proceeding with installation or use to ensure proper function and safety.

2. Émbaran Kasalametan

Always prioritize safety when working with electrical appliances. Improper installation or handling can lead to electric shock, injury, or damage to the appliance.

  • Pegatkeun Daya: Before any installation, maintenance, or repair, ensure the appliance is completely disconnected from the main power supply.
  • Personil anu mumpuni: Installation and replacement should ideally be performed by a qualified technician.
  • Nanganan kalayan ati-ati: The capillary tube is delicate. Avoid bending it sharply or damaging its insulation, as this can affect thermostat performance.
  • Sambungan listrik: Ensure all electrical connections are secure and correctly wired according to the appliance's wiring diagram.
  • Kaayaan Lingkungan: Do not expose the thermostat to excessive moisture or extreme temperatures outside its operating range.

3. Pedaran produk na Fitur

The Danfoss 25T65 077B2317L is a mechanical thermostat manufactured in Europe, specifically designed for temperature control in freezers and combined refrigerators. It features a long capillary tube for precise temperature sensing and a signaling contact that activates when the temperature rises above a set point, indicating a potential issue or defrost cycle.

Fitur konci:

  • Model: 077B2317L
  • Capillary Length: 2600 mm
  • Electrical Connections: 6.3 mm / 4.8 mm terminals
  • Special Function: Signaling contact for temperature increase
  • Compatibility: Suitable for various models including R5351A, KB2039, K59L1137, 59KL1141, 077B6429, and 077B2317.
Danfoss Thermostat 077B2317L with capillary tube

Gambar 1: Leuwihview of the Danfoss 077B2317L thermostat, showing the main body and the coiled capillary tube.

Handapeun view of Danfoss Thermostat 077B2317L showing model number

Gambar 2: Handapeun view of the thermostat, clearly displaying the model number '077B2317L' and other markings.

4. Setup jeung Instalasi

The installation of a replacement thermostat requires careful attention to detail. It is recommended that this procedure be carried out by a qualified appliance repair technician.

  1. Pegatkeun daya: Unplug the freezer or refrigerator from the electrical outlet to ensure no power is supplied to the unit.
  2. Access Old Thermostat: Locate and carefully remove the access panel or housing that covers the existing thermostat.
  3. Sambungan Dokumén: Before disconnecting, take clear photos or make a diagram of the wiring connections to the old thermostat. Note the position of each wire (e.g., power, compressor, signaling contact).
  4. Leupaskeun Thermostat Old: Disconnect the electrical wires and carefully unmount the old thermostat. Gently remove the capillary tube from its sensing location, ensuring it does not get damaged or kinked.
  5. Pasang Termostat Anyar: Mount the new Danfoss 077B2317L thermostat in the same location as the old one.
  6. Sambungkeun Wiring: Reconnect the electrical wires to the new thermostat's terminals (6.3 mm / 4.8 mm) according to your documented diagram. Ensure connections are firm and secure.
  7. Posisi Tabung Kapiler: Carefully route the new capillary tube to the exact same sensing location as the original. The placement of the capillary tube is critical for accurate temperature control. Avoid sharp bends or kinks.
  8. Aman sareng Reassemble: Secure the thermostat and capillary tube in place. Reattach any access panels or housing removed earlier.
  9. Tes: Plug the appliance back into the power outlet. Set the thermostat to the desired temperature and monitor the appliance's operation to ensure it cools correctly and cycles on/off as expected.
Samping view of Danfoss Thermostat 077B2317L showing electrical terminals

Gambar 3: Samping view of the thermostat, highlighting the electrical connection terminals.

Sisi séjén view of Danfoss Thermostat 077B2317L showing different electrical terminals

Gambar 4: Sisi séjén view, providing a clearer look at the various electrical terminals for wiring.

5. Parentah Operasi

Once installed, the Danfoss 25T65 077B2317L thermostat operates automatically to maintain the set temperature within your freezer or refrigerator. Most appliances with this type of thermostat will have an external or internal dial for temperature adjustment.

  • Setélan suhu: Adjust the temperature dial (if present on your appliance) to your desired coldness level. Typically, a higher number on the dial indicates a colder setting.
  • Ngawaskeun: Allow several hours for the appliance to reach the new temperature setting. Use an appliance thermometer to verify the internal temperature.
  • Signaling Contact: The integrated signaling contact will activate if the temperature inside the appliance rises significantly, which can occur during defrost cycles or if there is a malfunction. This contact can be wired to an indicator light or alarm system, depending on the appliance's design.

6. Pangropéa

The Danfoss 25T65 077B2317L thermostat is designed for reliable, long-term operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

  • Inspeksi Visual: Periodically inspect the thermostat and its capillary tube for any signs of physical damage, corrosion, or loose connections.
  • Kabersihan: Ensure the area around the thermostat and the capillary tube's sensing point is free from ice buildup or debris, which could interfere with accurate temperature sensing.
  • Pariksa profésional: If you suspect a problem, have a qualified technician inspect the thermostat and the appliance's refrigeration system.

7. Cara ngungkulan

If your appliance is not maintaining the correct temperature after thermostat replacement, consider the following:

MasalahMungkin Cukang lantarananaSolusi
Appliance not cooling at allNo power, faulty wiring, compressor issue, or completely failed thermostat.Check power supply. Verify wiring connections. Consult a technician for compressor or thermostat testing.
Appliance too warmThermostat set too high, capillary tube improperly placed, or thermostat malfunction.Adjust temperature setting. Ensure capillary tube is correctly positioned. If problem persists, thermostat may need replacement.
Appliance too cold / constantly runningThermostat set too low, capillary tube dislodged, or thermostat stuck in 'on' position.Adjust temperature setting. Verify capillary tube placement. If problem persists, thermostat may need replacement.
Signaling contact constantly activeHigh internal temperature, defrost cycle, or faulty signaling contact.Check appliance temperature. Observe if it's during a defrost cycle. If not, investigate cooling system or thermostat.

Upami léngkah-léngkah ngungkulan masalah henteu ngabéréskeun masalah, disarankeun pikeun ngahubungi teknisi layanan anu mumpuni.

8. Spésifikasi

SpésifikasiRincian
merekDanfoss
Nomer modél077B2317L
Rujukan Produsén077B2317L
TipeMechanical Capillary Thermostat
Panjang Kapiler2600 mm
Sambungan6.3 mm / 4.8 mm terminals
Perkiraan Ukuran (L x W x H)60 x 30 x 25 mm
Fitur hususSignaling contact for temperature increase
BahanBaja Tahan Karat (éksterior)
minuhanEN 60730-2-9 (as per product title)

9. Émbaran jaminan

Specific warranty details for replacement parts like the Danfoss 25T65 077B2317L thermostat typically depend on the retailer or the manufacturer's general policy for spare parts. Please refer to your purchase documentation or contact the seller for precise warranty terms and conditions. Keep your proof of purchase for any warranty claims.

10. Rojongan

For technical assistance, installation guidance, or troubleshooting beyond the scope of this manual, please contact the retailer from whom you purchased the thermostat or a certified appliance repair professional. When seeking support, have your product model number (077B2317L) and any relevant appliance information readily available.

11. Gambar produk

Puncak view of Danfoss Thermostat 077B2317L

Gambar 5: Puncak view of the Danfoss 077B2317L thermostat, showing the main body and mounting points.

Umum view of Danfoss Thermostat 077B2317L

Gambar 6: General perspective view of the thermostat, highlighting its compact design.

12. Video Produk Resmi

Henteu aya pidéo produk resmi ti anu ngajual anu sayogi pikeun barang ieu.