Orient Japanese Automatic 40mm Diver Style Watch Instruction Manual

Bubuka

This manual provides essential instructions for the proper use and care of your new Orient Japanese Automatic 40mm Diver Style Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Hareupeun view of the Orient Japanese Automatic 40mm Diver Style Watch, showcasindial biru sareng gelang baja tahan karat.

Disetél

1. Gulungan Mimiti

Your Orient watch is powered by an F6722 automatic movement, which is also hand-windable. To start the watch or if it has stopped, gently wind the crown clockwise approximately 30-40 times. This builds up the initial power reserve.

2. Nyetel Waktos sareng Kaping

1. Leupaskeun Makuta: The crown is a screw-down type for water resistance. Rotate the crown counter-clockwise until it springs out to position 1.
2. Setel Tanggal: Pull the crown out to position 2. Rotate the crown clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Setel waktos: Pull the crown out to position 3. The second hand will stop (hacking feature). Rotate the crown to set the hour and minute hands. To ensure accurate time, set the time a few minutes ahead, then push the crown back to position 1 when a time signal (e.g., from a radio or phone) reaches the desired time.
4. Ngamankeun Mahkota: Push the crown back to position 1 and screw it down clockwise firmly against the case to maintain water resistance.

Tukangeun view of the watch, showing the screw-down case back and the stainless steel bracelet clasp.

Ngoperasikeun Arloji Anjeun

Gerakan Otomatis

The F6722 movement is an automatic, self-winding caliber. It winds itself through the motion of your wrist. Regular wear will keep the watch powered. If the watch is not worn for an extended period, it will stop and require manual winding as described in the "Initial Winding" section.

Bezel Puteran Unidirectional

The watch features a unidirectional rotating bezel. This bezel can be used to measure elapsed time, typically for diving or other timed activities. To use it, align the triangle marker on the bezel with the minute hand at the start of your activity. The minute hand will then indicate the elapsed time against the bezel's markings.

Tahan cai

Jam tangan ieu tahan cai dugi ka 200 méter (660 kaki). Rating ieu ngajantenkeun cocog pikeun kagiatan laut profésional sareng olahraga cai permukaan anu serius. It is not suitable for scuba diving. Pastikeun makuta jam tangan tos disekrup sapinuhna sateuacan ngalaan jam tangan kana cai.

Pangropéa sareng Perawatan

• beberesih: Wipe the watch regularly with a soft, dry cloth to remove dust and smudges. For stainless steel parts, a slightly damp lawon bisa dipaké, dituturkeun ku drying langsung.
• Kristal Safir: The watch is equipped with a scratch-resistant sapphire crystal. While highly durable, it is not entirely impervious to damage. Avoid extreme impacts.
• Suhu ekstrim: Avoid exposing your watch to extreme temperatures or sudden temperature changes, as this can affect the movement and seals.
• Kimia: Keep the watch away from chemicals, solvents, and detergents, which can damage the case, seals, and strap materials.
• Médan magnét: Médan magnét anu kuat tiasa mangaruhan akurasi jam tangan mékanis. Jauhkeun jam tangan anjeun tina magnét anu kuat (contona, speaker, kulkas, alat éléktronik tertentu).
• jasa: For optimal performance, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years.

Pamérésan masalah

• Nonton Teu Ngajalankeun: If the watch has stopped, ensure it is sufficiently wound. Manually wind the crown 30-40 times. If it still does not start, gently shake the watch side-to-side to engage the rotor.
• Waktu teu akurat: Minor variations in accuracy are normal for mechanical watches. If the watch is consistently gaining or losing significant time, it may require adjustment by a professional watchmaker. Exposure to strong magnetic fields can also cause inaccuracy.
• Tanggal Teu Robah: Ensure the crown is fully pulled out to position 2 when setting the date. If the date is stuck, try advancing the time past midnight to see if it changes. If not, consult a watchmaker.
• Watch jero cai: If you notice condensation or water inside the watch, immediately take it to a qualified watchmaker for inspection and repair to prevent further damage.

spésifikasi

Garansi sareng Rojongan

For information regarding warranty coverage, service centers, or additional support, please refer to the official Orient websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

Sumberdaya tambahan

Below are some videos that may provide further insight into the watch's features and operation: