Bubuka
This instruction manual provides detailed guidance for assembling your ROBOTIME Wooden Craft Kits, featuring the Big Ben TG507 and Drum TG409 models. These 3D wooden puzzles are designed to provide an engaging and educational building experience. Please read all instructions carefully before beginning assembly.
Naon dina Box
Your ROBOTIME Wooden Craft Kit package includes the following components:
- Big Ben model components (pre-cut wooden sheets, LED light module)
- Drum model components (pre-cut wooden sheets, drumsticks, drum skin)
- Detailed graphic instructions for each model
- Small sandpaper piece (for smoothing edges, if needed)
Figure 1: Contents of the ROBOTIME Wooden Craft Kits, showing both Big Ben and Drum Kit models.
Setup sareng Majelis
Before starting, ensure you have a clean, flat workspace. Identify all wooden sheets and familiarize yourself with the part numbers. Gently push out the pieces from the wooden sheets. Do not force them. If a piece is difficult to remove, use a craft knife to carefully cut the connecting points.
Big Ben TG507 Assembly
Figure 2: The completed Big Ben model with its LED light feature.
- Persiapan: Carefully detach all Big Ben pieces from their wooden sheets. Organize them by part number to simplify the assembly process. Refer to the included graphic instructions for a detailed parts list.
- Pangwangunan Dasar: Begin by assembling the base of the Big Ben model. Connect the designated base pieces according to the numerical sequence in the instructions. Ensure all joints are snug.
- Tower Sections: Proceed to build the tower sections layer by layer. Each layer will interlock with the previous one. Pay close attention to the orientation of each piece, especially those with window cutouts.
- Clock Faces: Assemble and insert the clock face components into their respective positions on the tower.
- Pamasangan Lampu LED: Before fully closing the tower, locate the LED light module. Insert it into the designated cavity within the tower structure. Ensure the wiring is not pinched and the light source is positioned to illuminate the interior effectively.
- Roof and Spire: Complete the top sections, including the roof and the intricate spire. These pieces often require careful alignment.
- Cék ahir: Once assembled, gently press all connections to ensure they are secure. Test the LED light functionality.
Gambar 3: Detil views of the Big Ben model's architecture and clock faces.
Drum TG409 Assembly
Figure 4: The completed Drum Kit model.
- Persiapan: Separate all Drum Kit pieces from their wooden sheets. Group similar parts (e.g., drum bodies, stands, cymbals) to facilitate assembly.
- Drum Bodies: Assemble the individual drum bodies (bass drum, snare drum, tom-toms) by interlocking the curved wooden pieces and attaching the drum skins.
- Stands and Supports: Construct the various stands and supports for the drums and cymbals. These often involve interlocking base pieces and vertical posts.
- Cymbals and Pedals: Attach the cymbal pieces to their stands and assemble any pedal mechanisms if included.
- Final Arrangement: Once individual components are built, arrange and connect them to form the complete drum kit. Refer to the diagram for the correct placement of each drum and cymbal.
- stik drum: Place the miniature drumsticks as desired.
Figure 5: Hands demonstrating the assembly of a drum component.
Gambar 6: Detil views of the Drum Kit model's components.
Parentah Operasi
These models are primarily designed for display and decorative purposes. They are not intended for rough play.
- Big Ben LED Light: The Big Ben model includes an LED light module. To activate the light, ensure batteries are correctly installed (batteries not included, typically 2x AAA). Locate the small switch on the base or side of the model to turn the light on or off.
- tampilan: Place your assembled models on a stable, flat surface away from direct sunlight or excessive humidity.
Pangropéa
Proper care will ensure the longevity of your wooden models.
- beberesih: Dust the models gently with a soft, dry cloth or a soft-bristled brush. Avoid using water or chemical cleaners, as these can damage the wood.
- Panyimpenan: If storing, keep the models in a dry, cool place, ideally in their original packaging or a protective container to prevent dust accumulation and damage.
- Kaayaan Lingkungan: Avoid exposing the models to extreme temperatures, high humidity, or direct sunlight, which can cause warping, fading, or cracking of the wood.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pieces do not fit together easily. | Excess wood residue; incorrect orientation. | Gently sand the edges of the piece. Check the graphic instructions for correct orientation. Do not force pieces. |
| Model feels unstable after assembly. | Connections are not fully seated. | Carefully press all joints and connections to ensure they are fully interlocked. |
| Big Ben LED light does not turn on. | Batteries are missing, incorrectly installed, or depleted; switch is off. | Ensure batteries are inserted with correct polarity. Replace old batteries. Check that the power switch is in the "ON" position. |
spésifikasi
| Modél | Katerangan | Ukuran anu parantos dirakit (Kira-kira) | popotongan |
|---|---|---|---|
| Big Ben (TG507) | 3D Wooden Puzzle with LED Light | Ukuran 3.9 x 4.2 x 7.5 inci (L x W x H) | ~220 (approximate, based on similar models) |
| Drum Kit (TG409) | 3D Wooden Puzzle Drum Kit | Ukuran 7.5 x 5.3 x 4.3 inci (L x W x H) | 246 |
Figure 7: Dimensions for Big Ben (left) and Drum Kit (right) models.
Garansi sareng Rojongan
ROBOTIME is committed to providing high-quality products. If you encounter any issues or have questions regarding your wooden craft kit, please contact ROBOTIME customer support. Refer to the product packaging or the official ROBOTIME websitus pikeun inpo kontak.
For more information and product details, visit the official ROBOTIME store: ROBOTIME Store on Amazon.
