Buku Panduan Pangguna PRITECH Foil sareng Alat Cukur Botak RSM-1699

Bubuka

This manual provides detailed instructions for the safe and effective use of your PRITECH Foil and Bald Shaver RSM-1699. Please read all instructions carefully before first use and retain this manual for future reference.

Émbaran Kasalametan

Perhatosan Kasalametan Penting:

• When charging, use a power adapter with an input voltage not higher than 5V 1A to ensure safety and efficiency.
• Jaga alat tetep garing. Ulah dicelupkeun kana cai.
• Jauhkeun tina jangkauan barudak.
• Do not use if the foil or blades are damaged, as this may cause injury.
• Unplug the shaver before cleaning with water.

Produk Leuwihview

The PRITECH Foil and Bald Shaver RSM-1699 is a versatile 2-in-1 electric shaver designed for both foil shaving and bald head trimming. It features adjustable speeds and an LED display.

Image: The PRITECH Foil and Bald Shaver RSM-1699, showing the main unit, protective cover, and USB charging cable.

komponén:

• Kepala Pencukur Foil: For close shaving of facial hair and bald heads.
• Pemangkas pop-up: For pre-trimming longer hair, sideburns, or detailing.
• Témbong LED: Shows motor speed (RPM) and remaining battery percentage.
• Tombol Daya: Turns the shaver on/off and activates travel lock.
• Tombol Pangaturan Laju (+/-): To increase or decrease motor speed.
• Palabuhan Ngecas USB: For recharging the shaver.
• Panutup pelindung: To protect the foil head when not in use.

Gambar: Hiji ngabeledug view of the shaver, highlighting the LED display, USB charge port, upgraded double cutting knife tube, ultra-thin cutter head, durable mesh head, and protective cover.

Disetél

Ngecas Awal

Before first use, fully charge the shaver for approximately 2 hours. A full charge provides up to 120 minutes of cordless operation.

• Sambungkeun kabel ngecas USB kana port ngecas alat cukur.
• Connect the other end of the USB cable to a compatible power source (e.g., a 5V/1A USB adapter, laptop, USB outlet, car charger, or power bank).
• Layar LED bakal nunjukkeun status ngecas.

Image: Various USB charging options for the shaver, including laptop, USB outlet, USB adapter, car charger, and power bank. It also shows 120 minutes running time after 2 hours of fast charging.

Parentah Operasi

Turning On/Off and Travel Lock

• Pikeun Ngahurungkeun/Pareuman: Pencét sakeudeung tombol daya.
• To Activate Travel Lock: Press and hold the power button for three seconds. A lock icon will appear on the LED display.
• To Deactivate Travel Lock: Press and hold the power button for three seconds. The display will count down from 3 to 1, then the shaver will unlock and turn on.

Image: Illustration of how to activate and deactivate the intelligent travel lock by holding the power button for 3 seconds, with a countdown shown on the LED display.

Nyaluyukeun Speed

The shaver offers 3 adjustable speeds (6500RPM, 7000RPM, 7500RPM) to suit different hair thicknesses and lengths.

• Pencét éta '+' button to increase the motor speed.
• Pencét éta '-' button to decrease the motor speed.
• Kagancangan ayeuna bakal ditingalikeun dina layar LED.

Image: Close-up of the shaver's LED display showing motor speed (RPM) and remaining power percentage, along with the '+' and '-' buttons for speed adjustment.

Shaving Procedure

1. Pre-trimming (for longer hair): If your hair or beard is long, first use the pop-up trimmer to shorten it. Slide the pop-up trimmer switch upwards to engage it.
2. Foil Shaving: For a close shave, use the main foil shaver head. Move the shaver gently against the direction of hair growth, ensuring the foil makes full contact with your skin.
3. Contouring: The independently floating blades adapt to facial contours for a thorough shave.

Image: A visual guide demonstrating the steps for using the shaver for a bald head, including opening the pop-up trimmer, trimming side hair, trimming top hair, and using the foil head for the final shave.

Gambar: Detil view of the pop-up trimmer and the foil shaver head, highlighting the double floating cutter head, geometric pattern grid, and 0.02mm ultra-thin knife net for a close shave.

Pangropéa

Ngabersihkeun Alat Cukur

Pembersih rutin ngajamin kinerja sareng kabersihan anu optimal.

1. Remove Foil Net: Press the button on the right side of the shaver to easily detach the foil net.
2. Bersihan sikat: Use the provided cleaning brush to remove loose hairs from the blades and inside the shaver head.
3. Bilas: The shaver head is washable. Rinse the detached foil net and blades under running water. Ensure the main body is not immersed.
4. garing: Ngidinan sadaya bagian ka hawa garing lengkep sateuacan reassembling.

Image: A sequence of images demonstrating how to clean the shaver, including pressing a button to remove the foil head, brushing the blades, and rinsing the head under water.

Agul jeung Foil ngagantian

For continued optimal performance, it is recommended to replace the foil and blades periodically, typically every 12-18 months, depending on usage. Replacement parts can be purchased separately from authorized PRITECH retailers.

Pamérésan masalah

• Alat cukur henteu hurung: Check if the battery is charged. Ensure the travel lock is deactivated.
• Kinerja cukur anu goréng: Clean the shaver head and blades. Consider replacing the foil and blades if they are old or damaged. Ensure the shaver is fully charged.
• Masalah ngecas: Verify the USB cable and power adapter are working correctly and meet the 5V/1A specification.

spésifikasi

Rojongan Palanggan

Your satisfaction is important to us. If you encounter any issues or have questions regarding your PRITECH Foil and Bald Shaver, please contact our customer support team for assistance. We are committed to providing 100% satisfaction.