Targus USB-C Dual HDMI Travel Dock DSU200TT Instruction Manual

1. Langkungview

The Targus USB-C Dual HDMI Travel Dock DSU200TT is designed to expand your productivity on the go. This compact docking station allows for seamless connectivity, supporting dual 4K UHD 60Hz monitors and providing a range of essential ports for your peripherals.

Fitur konci:

• Supports up to dual 4K UHD 60Hz monitors via 2 HDMI ports.
• USB-C Alt Mode 7" host cable supports power pass-thru up to 100W.
• Includes 2 USB-A ports, 1 SD slot, 1 Micro SD slot, and 1 Gigabit Ethernet port.
• High Dynamic Range (HDR) capable.

2. Komponén produk

Gambar 2.1: Top-handap view of the Targus USB-C Dual HDMI Travel Dock, showcasing its compact design and integrated USB-C host cable.

Gambar 2.2: Sisi view of the dock, highlighting the two HDMI ports, SD card slot, Micro SD card slot, and a USB-C port for power delivery.

Gambar 2.3: Sisi sabalikna view of the dock, showing two USB-A ports and the Gigabit Ethernet port.

Figure 2.4: Close-up of the integrated USB-C host cable, used to connect the dock to your laptop or host device.

3. Parentah Setup

3.1 Nyambungkeun ka Alat Host Anjeun

1. Connect the integrated USB-C host cable from the Targus Travel Dock to an available USB-C port on your laptop or host device. Ensure the USB-C port on your device supports DisplayPort Alternate Mode (Alt Mode) for video output.

3.2 Connecting External Displays

1. Connect your HDMI monitors to the two HDMI ports on the Targus Travel Dock using standard HDMI cables. The dock supports dual 4K UHD (3840x2160) resolution at 60Hz.
2. Ensure your monitors are powered on and set to the correct HDMI input source.

3.3 Nyambungkeun périferal

1. Alat USB-A: Plug your USB-A peripherals (e.g., keyboard, mouse, external hard drive) into the two USB-A ports on the dock.
2. SD/Micro SD Cards: Insert your SD or Micro SD memory cards into the corresponding slots for data transfer.
3. Ethernet: For a stable wired network connection, connect an Ethernet cable from your router or network switch to the Gigabit Ethernet port on the dock.

3.4 Pangiriman kakuatan

1. To charge your host device while using the dock, connect your laptop's USB-C power adapter to the USB-C Power Delivery (PD) input port on the dock. The dock supports power pass-through up to 100W.

4. Parentah Operasi

4.1 Modeu Tampilan Ganda

Once connected, your host device should automatically detect the external monitors. You can configure your display settings (e.g., Extend, Duplicate, or Second Screen Only) through your operating system's display settings.

• Windows: Right-click on the desktop, select 'Display settings', and adjust as needed.
• macOS: Go to 'System Preferences' > 'Displays' to arrange and configure your monitors.

4.2 USB Data Transfer

The USB-A ports support data transfer for connected devices. Ensure your devices are properly connected and recognized by your host system.

4.3 Konéktipitas Ethernet

The Gigabit Ethernet port provides a stable and fast wired network connection. Your host device should automatically detect the Ethernet connection. If not, check your network settings.

4.4 Card Reader Functionality

Insert your SD or Micro SD cards into the respective slots. The cards will appear as removable drives on your host device, allowing you to transfer files.

5. Pangropéa

• Keep the dock clean by wiping it with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Pastikeun ventilasi anu leres di sabudeureun darmaga pikeun nyegah overheating.
• Ulah nepi ka dermaga kakeunaan suhu anu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
• Handle the integrated USB-C cable with care to prevent damage.

6. Cara ngungkulan

• Henteu aya kaluaran tampilan:
  - Ensure your host device's USB-C port supports DisplayPort Alternate Mode.
  - Verify that the HDMI cables are securely connected to both the dock and the monitors.
  - Check your monitor's input source settings to ensure they are set to the correct HDMI input.
  - Try restarting your host device.
• Ethernet Connection Drops/Not Working:
  - Ensure the Ethernet cable is securely connected to both the dock and your network.
  - Check your host device's network settings to confirm the Ethernet adapter is recognized and enabled.
  - Try updating your host device's network drivers.
• USB Peripherals Not Recognized:
  - Ensure the USB-A devices are securely plugged into the dock's USB-A ports.
  - Try connecting the peripheral directly to your host device to confirm it functions independently.
  - If using a high-power USB device, ensure the dock is receiving sufficient power via the USB-C PD input.
• Power Pass-Through Not Working:
  - Ensure your laptop's USB-C power adapter is connected to the correct USB-C PD input port on the dock.
  - Verify that your power adapter is functioning correctly.

7. Spésifikasi Téknis

8. Garansi jeung Rojongan

This Targus USB-C Dual HDMI Travel Dock (DSU200TT) is backed by the manufacturer's 3-year limited warranty. For warranty claims or technical support, please refer to the official Targus websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.

Pikeun pitulung salajengna, mangga buka di Targus Store on Amazon.