Okin Power Recliner Motor Instruction Manual

Produk Leuwihview

This manual provides essential information for the installation, operation, and maintenance of the Okin Model JLDQ-12 & JLDQ.12.157.333K Power Recliner Motor. This motor is designed as a replacement part for electric sofa lift chairs.

Figure 1: Okin JLDQ.12.157.333K Power Recliner Motor assembly.

The Okin JLDQ.12.157.333K is an original Okin JLDQ motor. It is suitable for replacing the JLDQ.12.157.333K model and can also serve as a replacement for JLDQ.12.157.333E/F/G/H/K/L/P/U/V/W/X/Z series motors, with minor differences that do not affect functionality.

Émbaran Kasalametan

Always prioritize safety when handling and installing electrical components. Read and understand all instructions before proceeding.

• Before attempting any replacement or repair, ensure the power supply to the recliner chair is disconnected.
• Verify the motor brand and model number on your existing motor matches the replacement part (JLDQ.12.157.333K or compatible series).
• Troubleshoot the switch and power supply unit first if the recliner is not functioning, before assuming the motor is faulty.
• Ensure the replacement motor's minimum install dimension, stroke, and plugs are compatible with your recliner's frame.
• Follow all safety instructions provided with your specific recliner chair.
• Pikeun pamakéan indoor wungkul.

Spésifikasi produk

The following table details the technical specifications of the Okin JLDQ.12.157.333K Power Recliner Motor:

angka 2: Tutup-up view of the motor's identification label, displaying model JLDQ.12.157.333K and serial number Q22075291 00049.

Eusi pakét

pakét ngawengku komponén di handap:

• 1 x Okin Refined Power Recliner Motor (Model JLDQ.12.157.333K)

The actuator motor set consists of the motor unit and three distinct connectors:

• A 5-pin round plug for the switch hand control.
• A 2-pin square plug with a clip for the power supply connection.
• A 2-pin socket for connecting a slaved motor (if applicable).

Gambar 3: Detil view of the motor's connectors, including the 2-pin square plug for power, the 5-pin round plug for hand control, and the 2-pin socket for a slaved motor.

Instalasi (Setélan)

Replacing the Okin recliner motor is a straightforward process. Follow these steps carefully:

1. Pegatkeun Daya: Before beginning, unplug the recliner chair from the wall outlet to prevent electrical shock.
2. Aksés ka Motor: Carefully tilt the recliner chair onto its side or back to expose the existing motor and frame.
3. Identipikasi sambungan: Note how the existing motor is connected to the hand control, power supply, and the recliner frame. Take photos if necessary for reference.
4. Leupaskeun motor heubeul: Unscrew and detach the old motor from the recliner frame. Disconnect all plugs (hand control, power, and any slaved motor connections).
5. Pasang Motor Anyar: Position the new Okin JLDQ.12.157.333K motor in the same location as the old one. Secure it to the recliner frame using the appropriate screws. The installation is typically easy, often involving 6 screws of the same size.
6. Connect Plugs: Connect the 5-pin round plug to the hand control, the 2-pin square plug with clip to the power supply, and the 2-pin socket to any slaved motor if your chair uses one. Ensure all connections are secure.
7. Fungsi Uji: Once the motor is securely installed and all connections are made, carefully return the recliner to its upright position. Plug the chair back into the wall outlet and test the recliner's functions using the hand control.

Figure 4: Visual representation of the motor's features and how it integrates into a recliner chair.

Operasi

The Okin JLDQ.12.157.333K motor operates in conjunction with your recliner's existing hand control. Once installed and powered, the motor will respond to commands from the hand control to extend or retract the recliner mechanism.

• Use the hand control buttons to initiate the reclining or lifting motion.
• The motor has an operation frequency of "On 1 min / Off 8 min". This means it is designed for intermittent use. Avoid continuous operation for more than 1 minute to prevent overheating and ensure longevity. Allow the motor to rest for at least 8 minutes after 1 minute of continuous use.
• The motor provides a push and pull force of 750N, enabling smooth and reliable movement of the recliner mechanism.

Pangropéa

The Okin JLDQ.12.157.333K power recliner motor is designed for durability and requires minimal maintenance. However, periodic checks can help ensure its optimal performance and extend its lifespan.

• Tetep Bersih: Ensure the motor and its moving parts are free from dust, debris, and obstructions. Use a dry cloth to wipe down the exterior.
• Pariksa sambungan: Periodically inspect all electrical connections (power, hand control, slaved motor) to ensure they are secure and free from damage.
• Lubrication: The motor is generally self-lubricating. Do not apply additional lubricants unless specifically instructed by the manufacturer or a qualified technician.
• Hindarkeun Overload: Do not exceed the maximum weight recommendation of your recliner chair, as this can strain the motor.

Pamérésan masalah

If your recliner chair is not functioning correctly after motor replacement, or if you experience issues, consider the following troubleshooting steps:

If these steps do not resolve the issue, contact Okin customer support or a qualified technician.

Garansi sareng Rojongan

For information regarding warranty coverage for your Okin JLDQ.12.157.333K Power Recliner Motor, please refer to the warranty documentation provided with your purchase or visit the official Okin websitus.

For technical support, replacement parts, or further assistance, please contact Okin customer service. You can find contact information on the Okin brand store page or through their official websitus.

Nganjang ka Toko Okin dina Amazon pikeun langkung seueur produk sareng inpormasi.