Docreate spot welder
Docreate Portable Spot Welder Instruction Manual
Model: Rectangle Spot Welder
1. Bubuka
This manual provides detailed instructions for the safe and effective operation and maintenance of your Docreate Portable Spot Welder. This device is designed for precise spot welding of various nickel-plated strips and battery types, including 18650, nickel-metal hydride, and cadmium nickel batteries. Its portable design and adjustable power output make it suitable for a wide range of DIY and professional applications.
Image 1.1: Docreate Portable Spot Welder and included accessories.
2. Émbaran Kasalametan
Always read and understand all safety warnings and instructions before operating the spot welder. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the work area is clean, well-lit, and free from flammable materials.
- Wear appropriate personal protective equipment, including safety glasses, during operation.
- Do not operate the spot welder in wet or damp kaayaan.
- Avoid accidental contact between the welding probes when energized to prevent short circuits or unexpected sparks.
- Do not attempt to weld on rusty, corroded, or dirty surfaces, as this can lead to poor welds and potential hazards.
- Jauhkeun alat ti barudak jeung piaraan.
- Use only the provided charging cable and ensure proper voltage (5V) for charging to prevent damage to the internal battery.
- Do not disassemble or modify the spot welder. Refer all servicing to qualified personnel.
Image 2.1: Do not weld on rusty or corroded surfaces.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- Docreate Portable Spot Welder Unit
- Welding Probes (Detachable)
- Nickel Strip Sample
- Kabel Ngecas USB Tipe-C
Image 3.1: Contents of the Docreate Portable Spot Welder package.
4. Fitur Produk
- Konstruksi kualitas luhur: Made of high-quality ABS and metal material, ensuring high durability and stable performance for a long service life.
- Color OLED Display: Features an OLED color display that shows preheat delay time, gear position, and other operational data, providing clear status at a glance.
- 80 Levels Adjustable Output: Offers 80-speed adjustable output power for precise welding and optimal results.
- Portabel sareng Merenah: Handheld design supports welding of various common nickel mobile phone batteries, making it convenient for on-the-go repairs.
- Aplikasi lega: Supports welding of nickel-plated strips with a thickness of 0.1mm-0.2mm, suitable for cylindrical lithium batteries, nickel-metal hydride batteries, and cadmium nickel batteries (e.g., 18650).
- Detachable Welding Pens: Equipped with copper oxide aluminum welding needles that are strong and replaceable.
Gambar 4.1: Detil view of the OLED color display.
Image 4.2: The portable design allows for flexible use without being constrained by cable length.
5. Setélan
5.1 Ngecas Alat
Before first use, fully charge the spot welder using the provided Type-C USB charging cable. Connect the cable to the Type-C port on the device and a compatible 5V power source (e.g., USB wall adapter, computer USB port). The charging indicator light will show the charging status.
Image 5.1: Type-C charging port for convenient power replenishment.
5.2 Connecting Welding Probes
Insert the two welding probes into their respective ports on the front of the spot welder. Ensure they are securely connected.
5.3 Powering on / Pareum
To power on the device, long-press the POWER button. To power off, long-press the POWER button again. The device features an automatic shutdown in 6 minutes of inactivity to conserve power.
5.4 Basa jeung Mode Pamilihan
- To switch between English and Chinese, press the POWER jeung + tombol babarengan.
- To switch between Automatic and Manual mode, press the + jeung - tombol babarengan.
Image 5.2: Control buttons and ports for operation and settings.
6. Parentah Operasi
6.1 Ngartos Layar OLED
The OLED display provides real-time information about the spot welder's status:
- Automatic/Manual Mode: Nunjukkeun mode operasi ayeuna.
- Batré Voltage: Shows the remaining power of the internal battery.
- Preheat (PreH): Displays the preheat delay time.
- Delay (Dlay): Shows the welding delay time.
- Gear: Indicates the current power output level (1-80).
- Welding Progress Bar: Visual representation of the welding process.
6.2 Adjusting Output Power (Gear)
Ngagunakeun éta + jeung - buttons to adjust the output power (gear) from 1 to 80 levels. Higher numbers indicate stronger welds. Experiment with different settings on scrap material to find the optimal level for your specific application and material thickness (0.1mm-0.2mm nickel-plated strips).
6.3 Performing a Spot Weld
- Ensure the battery terminals and nickel strips are clean and free of oxidation.
- Position the nickel strip firmly against the battery terminal.
- Place both welding probes onto the nickel strip, ensuring good contact and maintaining a 60-degree angle for optimal results.
- Press the foot pedal (if connected) or activate the weld via the device's controls. The device will automatically execute the weld based on the set preheat and delay times.
- Lift the probes once the weld is complete. Inspect the weld for strength and consistency.
Image 6.1: Maintain a 60-degree angle for effective welding.
Image 6.2: Correct (top) and incorrect (bottom) welding probe placement.
7. Pangropéa
- beberesih: Regularly clean the welding probes and the device body with a dry, soft cloth. Ensure no debris or metal particles accumulate on the probes.
- Ngagantian Probe: The welding probes are detachable and replaceable. If the tips become worn or damaged, replace them to ensure consistent weld quality.
- Panyimpenan: Store the spot welder in a cool, dry place away from direct sunlight and moisture. Ensure the device is powered off before storage.
- Perawatan batré: For optimal battery life, avoid fully discharging the internal battery frequently. Charge the device when the battery indicator is low.
Image 7.1: Detachable welding pens for easy maintenance and replacement.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Poor or inconsistent welds | Incorrect power setting (gear), dirty/worn probes, oxidized material, improper probe pressure/angle. | Adjust gear setting, clean/replace probes, ensure material is clean, apply firm and even pressure at a 60-degree angle. |
| Alat teu hurung | Low battery, power button not pressed long enough. | Charge the device fully. Long-press the POWER button for 3 seconds. |
| Display is blank or erratic | Low battery, internal error. | Charge the device. If problem persists, contact customer support. |
| Overheating | Continuous use without cooling, high power setting for prolonged periods. | Allow the device to cool down between uses. Reduce power setting if not necessary. |
9. Spésifikasi
- merek: Docreate
- model: Spot Welder (Rectangle Spot Welder variant)
- Beurat barang: 14.4 ons
- Ukuran Paket: 11.1 x 3.39 x 1.61 inci
- Sumber Daya: Internal Rechargeable Battery (charged via AC adapter, not included)
- Kaluaran adjustable: 80 Gear Levels
- Supported Nickel Strip Thickness: 0.1mm - 0.2mm
- tampilan: Color OLED
- Pareum otomatis: Leres, saatos 6 menit teu aktip
- ASIN: B0CB5B59J6
- Titimangsa munggaran sadia: 5 Juli 2023
10. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please contact Docreate customer service through the retailer where the product was purchased. Please have your product model and ASIN (B0CB5B59J6) ready when contacting support.
For additional resources and frequently asked questions, please visit the official Docreate website or the product page on Amazon.com.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.