Modul Saklar Gordén Pinter AVATTO N-CSM01-2 WiFi TUYA Manual Pangguna

1. Bubuka

Thank you for choosing the AVATTO N-CSM01-2 Smart Curtain Switch Module. This module allows you to control your motorized curtains or blinds remotely via Wi-Fi using the Tuya Smart Life application, or through voice commands when integrated with compatible smart home assistants. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Émbaran Kasalametan

• Pastikeun kakuatan dipegatkeun saméméh instalasi atawa perawatan pikeun nyegah shock listrik.
• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni atanapi jalma anu gaduh pangaweruh listrik.
• Do not exceed the maximum load specified for the device.
• Ngoperasikeun alat dina vol dieusiantage rentang.
• Jauhkeun alat tina cai sareng lingkungan kalembaban anu luhur.

3. Produk Langkungview jeung Spésifikasi

The AVATTO N-CSM01-2 is a compact Wi-Fi module designed to convert traditional curtain switches into smart controls. It supports two channels for independent control of two curtain motors or one motor with open/close functionality.

3.1 Spésifikasi Téknis

• model: N-CSM01-2
• Masukan Voltage: AC100-240V, 50/60Hz
• Max. Beban: 2x3A
• Protokol nirkabel: Wi-Fi (2.4GHz)
• Aplikasi Kontrol: Tuya Smart / Smart Kahirupan
• ASIN: B0C9YN2K3P
• Rujukan Pabrikan: 2829

3.2 Diagram Wiring

Gambar 1: Hareupeun view of the AVATTO N-CSM01-2 module showing input voltage, max load, and detailed wiring terminals (L1, L2, L3, L4 for motor connections, L, N for power input, and S1, S2, S3, S4 for external switch connections).

3.3 Dimensi modul

Gambar 2: Balik view of the AVATTO N-CSM01-2 module, illustrating its compact design suitable for integration behind existing switches or within junction boxes.

4. Setup jeung Instalasi

4.1 Instalasi Listrik

1. Pegatkeun Daya: Sateuacan ngamimitian, pastikeun catu daya utama ka sirkuit dipareuman dina pemutus sirkuit.
2. Identipikasi Kawat: Locate the Live (L) and Neutral (N) wires for power input, and the motor control wires (typically Open, Close, and Common/Neutral for the motor).
3. Nyambungkeun Input Daya: Connect the Live (L) wire from your power supply to the 'L' terminal on the module and the Neutral (N) wire to the 'N' terminal on the module.
4. Nyambungkeun Motor:
   • For a single motor with Open/Close: Connect the motor's 'Open' wire to L1, 'Close' wire to L2, and the motor's Neutral/Common to L. (Refer to Figure 1 for L, N, L1, L2, L3, L4 connections).
   • For two independent motors: Connect Motor 1's Open to L1, Close to L2. Connect Motor 2's Open to L3, Close to L4. Ensure both motors share a common Neutral connected to the 'L' terminal on the module (as per diagram, 'L' is common for motor outputs).
5. Connect External Switches (Optional): If using traditional physical switches, connect them to S1, S2, S3, S4 terminals as per your desired configuration. S1/S2 typically control L1/L2, and S3/S4 control L3/L4.
6. Modul Aman: Place the module securely within the switch box or junction box, ensuring no wires are pinched.
7. Mulangkeun Daya: Hurungkeun deui catu daya utama.

4.2 App Pairing (Tuya Smart / Smart Life)

1. Unduh App: Unduh aplikasi "Tuya Smart" atanapi "Smart Life" tina toko aplikasi telepon pinter anjeun (iOS atanapi Android).
2. Ngadaptar/Log: Buka aplikasi teras daptar pikeun ngadamel akun énggal atanapi lebet kana akun anu tos aya.
3. Lebetkeun Mode Papasangan: After powering on the module, it should automatically enter pairing mode (indicated by a rapidly blinking indicator light, if present). If not, press and hold the reset button (if available, or the connected physical switch for 5-10 seconds) until the indicator blinks rapidly.
4. Tambahkeun Alat: In the app, tap the '+' icon in the top right corner to add a device. Select "Curtain Switch" or "Curtain Module" from the device list.
5. Konfirmasi Kedip-kedip: Confirm that the indicator light is blinking rapidly in the app.
6. Nyambung ka Wi-Fi: Enter your 2.4GHz Wi-Fi network name and password. The module does not support 5GHz Wi-Fi.
7. papasangan: The app will begin searching for and connecting to the device. Once connected, you can rename the device and assign it to a room.

5. Ngoperasikeun Modul

5.1 App Control

• Open the Tuya Smart or Smart Life app and select your curtain module.
• You will see controls for "Open", "Close", and "Stop" for each connected curtain.
• You can also set schedules, timers, and create scenes for automated operation.
• Saluyukeun persén bubukatage for precise control (if supported by your motor and app calibration).

5.2 Voice Control (with compatible assistants)

Once integrated with Amazon Alexa or Google Assistant (via the Tuya Smart/Smart Life app settings), you can use voice commands:

• "Alexa, open [Curtain Name]"
• "Hey Google, close [Curtain Name]"
• "Alexa, stop [Curtain Name]"
• "Hey Google, set [Curtain Name] to 50%" (if percentage control is calibrated)

5.3 Manual Control (via connected physical switches)

If you have connected traditional physical switches, you can still operate your curtains manually by pressing the corresponding switch buttons.

6. Pangropéa

• beberesih: Gently wipe the module with a dry, soft cloth if necessary. Do not use liquid cleaners or solvents.
• Pembaruan firmware: Periodically check the Tuya Smart/Smart Life app for available firmware updates to ensure optimal performance and security.
• Kaayaan Lingkungan: Ensure the module is kept within its operating temperature and humidity ranges.

7. Cara ngungkulan

8. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided by the retailer or manufacturer at the time of purchase. General return policies are subject to the retailer's terms and conditions.

For further assistance, you may contact AVATTO customer support or consult the Tuya Smart / Smart Life app's help section.