1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your FERMAX Duox Plus Veo-XL DDA 7-inch Monitor. Please read these instructions carefully before using the device to ensure safe and efficient operation. Keep this manual for future reference.
2. Émbaran Kasalametan
Observe the following safety precautions to prevent damage to the device or injury to users:
- Kasalametan listrik: Installation and wiring must be performed by qualified personnel in accordance with local electrical codes. Disconnect power before performing any installation or maintenance.
- Lingkungan: Do not expose the monitor to extreme temperatures, humidity, direct sunlight, or corrosive environments. Ensure adequate ventilation.
- Penanganan: Nanganan alat kalayan ati-ati. Hindarkeun ragrag atanapi tunduk kana dampak anu kuat.
- beberesih: Anggo kaén anu lemes sareng garing pikeun beberesih. Ulah make cleaners abrasive atawa pangleyur.
3. Eusi Paket
Pastikeun yén sadaya komponén aya dina bungkusan:
- FERMAX Duox Plus Veo-XL DDA 7-inch Monitor
- Kurung ningkatna
- Pamasangan screws na colokan témbok
- Connection terminals/connectors
- Manual pangguna (dokumén ieu)
4. Setup jeung Instalasi
The FERMAX Duox Plus Veo-XL DDA monitor is designed for wall-mounted installation. Ensure the installation location is suitable and provides easy access for wiring.
4.1 Masang Monitor
- Nyiapkeun Tembok: Choose a suitable location on the wall, ensuring it is free from obstructions and has access to the necessary wiring.
- Pasang Bracket Pasang: Use the provided screws and wall plugs to securely attach the mounting bracket to the wall. Ensure the bracket is level.
- Sambungkeun Wiring: Before mounting the monitor, connect the Duox Plus system wiring to the terminals on the back of the monitor. Refer to the wiring diagram for correct connections.
- Pasang Monitor: Carefully align the monitor with the mounting bracket and secure it in place. Ensure it clicks or slides firmly into position.
Figure 1: FERMAX Duox Plus Veo-XL DDA 7-inch Monitor. This image shows the front view of the monitor, highlighting its 7-inch screen and sleek design, ready for wall mounting.
4.2 Mimiti Power-On
Once the monitor is securely mounted and wired, restore power to the Duox Plus system. The monitor should power on and display the initial setup screen or standby interface. Follow any on-screen prompts for initial configuration, if applicable.
5. Parentah Operasi
The FERMAX Duox Plus Veo-XL DDA monitor provides intuitive controls for managing your video intercom system.
5.1 Ngajawab Telepon
When an outdoor panel initiates a call, the monitor will ring and display the caller's video. Press the Waleran button (typically indicated by a telephone icon) to establish communication.
5.2 Muka Panto
During an active call or while monitoring the outdoor panel, press the Panto Buka button (typically indicated by a key icon) to unlock the entrance door.
5.3 Monitoring the Outdoor Panel
Ka view the outdoor panel camera without an incoming call, press the Ngawaskeun button (often a camera icon). This allows you to see who is at the entrance at any time.
5.4 Nyaluyukeun Setélan
Access the monitor's menu to adjust settings such as ringtone volume, display brightness, and other system preferences. Navigate the menu using the directional buttons and confirm selections with the OK or ménu kancing.
6. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your FERMAX monitor.
6.1 Cleaning the Screen and Casing
Make kaen nu lemes, teu aya lint rada dampened with water to clean the screen and the monitor casing. Do not use harsh chemicals, abrasive cleaners, or aerosol sprays, as these can damage the surface or internal components.
6.2 Perawatan Umum
- Keep the monitor free from dust and debris.
- Ensure no liquids spill onto the device.
- Hindarkeun nempatkeun barang beurat dina monitor.
7. Cara ngungkulan
Upami anjeun mendakan masalah sareng monitor anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Monitor teu hurung. | No power supply; loose wiring. | Check power connection to the system. Verify wiring connections are secure. |
| No video from outdoor panel. | Camera issue; wiring fault; system configuration. | Check outdoor panel camera. Inspect video wiring. Consult system installer for configuration check. |
| Teu aya audio nalika nelepon. | Microphone/speaker issue; volume too low; wiring fault. | Adjust monitor volume. Check audio wiring. |
| Door open function not working. | Wiring to door lock faulty; lock mechanism issue. | Verify wiring to the door strike/lock. Check the door lock mechanism. |
Upami masalahna teras-terasan saatos nyobian solusi ieu, hubungi dukungan téknis anu mumpuni.
8. Spésifikasi
Technical specifications for the FERMAX Duox Plus Veo-XL DDA 7-inch Monitor:
- merek: FERMAX
- model: Duox Plus Veo-XL DDA
- Ukuran layar: 7 inci
- Ukuran Layar Ngadeg: 7 inci
- Téknologi tampilan: LCD
- Pedaran Beungeut Layar: Herang
- Fitur husus: layar lebar
- Ukuran Paket: 7.48 x 7.48 x 1.69 inci
- Pabrikan: FERMAX
- ASIN: B0C9F4CMGM
- Titimangsa munggaran sadia: 26 Juni 2023
9. Garansi jeung Rojongan
FERMAX products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official FERMAX websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
