OPTIMA D200+ Battery Maintainer and Lithium Charger User Manual

Bubuka

The OPTIMA D200+ is a 12V performance battery maintainer and charger designed for various battery types, including Lithium (LiFePO4), AGM, and standard Flooded batteries. This device offers advanced features such as a 4-color Charge Mode Status LED bar, a dual-function battery gauge, and selectable performance profiles to optimize battery life and performance. Its weatherproof construction and integrated cable management make it suitable for both portable and wall-mounted use.

This manual provides essential information for the safe and effective operation, setup, and maintenance of your OPTIMA D200+ charger.

Émbaran Kasalametan penting

Baca sadaya parentah sateuacan nganggo produk ieu.

• Salawasna nganggo panyalindungan panon sareng pakean pelindung nalika damel sareng batré.
• Pastikeun ventilasi anu cekap nalika ngecas batré pikeun nyegah akumulasi gas anu ngabeledug.
• Never smoke or allow a spark or flame in the vicinity of a battery or engine.
• Nyambungkeun sarta megatkeun kaluaran DC clamps only after setting the charger switch to the OFF position and removing the AC cord from the electrical outlet.
• Ulah ngalaan carjer ka hujan atawa kalembaban anu kaleuleuwihan.
• Jauhkeun tina jangkauan barudak.
• Do not use the charger if it has received a sharp blow, been dropped, or otherwise damaged.
• Ensure the AC power cord is properly routed to prevent tripping hazards or damage.

Fitur produk

The OPTIMA D200+ is equipped with several features designed for convenience and optimal battery care:

• Kompatibilitas Multi-Batré: Supports Lithium (LiFePO4), AGM, and Flooded 12V batteries.
• Manajemén Kabel Terpadu: Features a wrap for organized storage of AC and DC cables.
• Dual-Use Body Design: Allows for portable use or permanent wall mounting with the included bracket.
• Advanced LED Indicators: A 4-color LED bar displays charge mode status, alongside indicators for Connected, Power, and Check.
• Dual-Function Battery Gauge: Provides a pre-charge battery test and displays charging progress.
• Energy Saver Auto Maintain Mode: Monitors and maintains the battery at a full state of charge while minimizing AC power consumption.
• Téknologi Sambungan Tanpa Spark: Enhances safety during connection and disconnection.

Figure 1: OPTIMA D200+ Battery Maintainer with integrated cable management.

angka 2: Tutup-up view of the D200+ LED display panel, showing Connected, Power, and Check indicators, along with the charge mode status bar.

Eusi pakét

Pastikeun yén sadaya item aya dina bungkusan:

• OPTIMA D200+ Battery Maintainer Unit
• Batre Clamps (Beureum jeung Hideung)
• Tembok Pangatur Bracket
• Kabel Daya AC

Figure 3: The wall organizer bracket for convenient storage.

Disetél

Nyambungkeun ka Batré

1. Ensure the OPTIMA D200+ is disconnected from AC power.
2. Sambungkeun cl positip beureum (+)amp ka terminal positif (+) batré.
3. Sambungkeun hideung négatip (-) clamp to the negative (-) terminal of the battery. For vehicle applications, if the battery is installed in the vehicle, connect the black negative (-) clamp kana chassis kendaraan atanapi blok mesin jauh tina batréna.
4. Sakali clamps are securely connected, plug the AC power cord into a standard electrical outlet.

Figure 4: The D200+ connected to a battery in a vehicle.

Pamasangan témbok (Opsional)

The D200+ can be mounted using the provided wall organizer bracket. Secure the bracket to a suitable surface using appropriate mounting hardware (not included). The charger unit then slides into the bracket for secure storage.

Parentah Operasi

Power On and Initial Status

Once connected to both the battery and AC power, the charger will power on. The "Power" LED will illuminate, and the "Connected" LED will turn green if the connection is successful.

Pilihan Tipe Batré

The D200+ supports three battery types: OPTIMA LiFePO4, AGM, and Flooded. Press the "Select" button (located near the battery type indicators) to cycle through the options until the correct battery type is illuminated.

Figure 5: Indicators for OPTIMA Li, AGM, and Flooded battery types.

Pre-Charge Battery Test

Before charging, you can perform a pre-charge battery test. Press the "Test" button to view the current battery charge level on the dual-function battery gauge. This gauge displays the charge percentage ti 0% nepi ka 100%.

Figure 6: The "Test" button and battery charge level gauge.

Charging Process and Status Indicators

Once the battery type is selected, the D200+ will automatically begin the charging process. The 4-color Charge Mode Status LED bar will indicate the current charging phase:

• nganalisis: Blue pulsing light.
• muatan: Lampu beureum padet.
• Conditioning: Solid amber light.
• Ngajaga Otomatis: Lampu héjo padet.
• Kasalahan: OFF (no light).

The charger will transition to "Auto Maintain" mode once the battery is fully charged, ensuring optimal battery health without overcharging.

Pangropéa

• Tetep carjer beresih jeung garing. Ngusap ku hipu, damp lawon lamun perlu.
• Regularly inspect the AC power cord and DC output cables for any signs of damage, cuts, or fraying. Do not use the charger if cables are damaged.
• Store the charger in a cool, dry place when not in use. Utilize the integrated cable management wrap for tidy storage.
• Pastikeun terminal batré bersih sareng bébas tina korosi sateuacan nyambungkeun carjer.

Pamérésan masalah

If you encounter issues with your OPTIMA D200+, refer to the following common problems and solutions:

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support, please refer to the official OPTIMA website or contact OPTIMA customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

OPTIMA Customer Support: Visit OPTIMA Support Page