Buku Panduan Panutup Sikat Utama roborock Seri Qrevo

1. Bubuka

This manual provides instructions for the installation and maintenance of the roborock Qrevo Series Main Brush Cover. This accessory is designed to protect the main brush and ensure optimal cleaning performance for your compatible roborock robot vacuum cleaner.

Kasaluyuan: This main brush cover is compatible with roborock Qrevo, Qrevo S, Qrevo Pro, and Qrevo MaxV robot vacuum models.

2. Fitur Produk

• Desain ngambang: The cover features a versatile floating mechanism that allows it to adjust to various floor surfaces, ensuring consistent contact and improved cleaning effectiveness.
• Shock-Absorbing Rubber Coating: Equipped with a special shock-absorbing rubber pad where it contacts the floor, this design reduces wear on the cover and helps prevent damage to your flooring.
• Desain anti kusut: The unique structure of the main brush cover helps to block and contain hair, preventing it from tangling around the main brush.
• Snap-on Structure: Designed for ease of use, the cover features a snap-on mechanism for simple, one-handed installation and removal.

3. Pamasangan

Follow these steps to install or replace the main brush cover on your roborock Qrevo series robot vacuum:

1. Pareum listrik: Ensure your robot vacuum is powered off before beginning installation.
2. Kompartemen Sikat Aksés: Turn the robot vacuum upside down to access the main brush compartment.
3. Cabut Panutup Lawas (upami aya): Locate the two release tabs on the existing main brush cover. Press these tabs inward and lift the cover to remove it.
4. Posisi Panutup Anyar: Align the new main brush cover with the compartment opening. Ensure the tabs on the cover match the slots on the robot.
5. Panutup Aman: Gently press the new cover down until you hear a click, indicating it is securely locked into place. Verify that both tabs are fully engaged.

Gambar 1: Luhur view of the roborock Qrevo Series Main Brush Cover. This image shows the overall shape and the small brushes designed to prevent tangles.

Gambar 2: Sisi view of the main brush cover, highlighting the snap-on structure for easy installation and removal.

4. Pangropéa

Regular maintenance of the main brush cover helps ensure the longevity and optimal performance of your robot vacuum.

• Frékuénsi beberesih: Inspect the main brush cover weekly, or more frequently if your robot vacuum operates in areas with high hair or debris accumulation.
• panyabutan bulu: The anti-tangle design helps, but some hair may still accumulate. Remove any tangled hair or debris from the small brushes and the edges of the cover.
• Ngusap handap: Use a dry cloth to wipe down the cover and remove any dust or dirt. Avoid using harsh chemicals or abrasive materials.
• Pariksa Karusakan: Periodically check the rubber coating and the snap-on tabs for any signs of wear or damage. Replace the cover if it is damaged to maintain proper function and floor protection.

5. Cara ngungkulan

Upami anjeun mendakan masalah anu aya hubunganana sareng panutup sikat utama, pertimbangkeun hal-hal ieu:

• Panutup Henteu Ngamankeun: Ensure the cover is correctly aligned and pressed down firmly until both snap-on tabs click into place. Check for any obstructions preventing proper closure.
• Ngaronjat Noise: A loose or improperly installed cover can cause increased operational noise. Reinstall the cover, ensuring it is fully secured.
• Kinerja beberesih anu dikirangan: Excessive hair or debris trapped under the cover or around the main brush can hinder cleaning. Perform thorough maintenance as described in Section 4.
• Goresan lantai: If the shock-absorbing rubber coating is damaged or missing, it may lead to floor scratches. Inspect the cover for damage and replace if necessary.

6. Spésifikasi

7. Garansi jeung Rojongan

For warranty information or technical support, please refer to the official roborock website or contact roborock customer service directly. Keep your purchase receipt for warranty claims.

Official Roborock Store: Roborock Official EU Store