Tyger Auto LanderX Running Board Installation Manual

1. Produk Langkungview

The Tyger Auto LanderX Running Boards are designed to provide a secure and convenient step for entering and exiting your truck. Constructed from heavy-duty carbon steel with a textured black finish, these running boards offer durability and enhanced corrosion resistance. The unique triangular tubing design boosts structural strength, and the 5-inch drop ensures effortless access.

Image 1.1: Tyger Auto LanderX Running Boards. This image displays the pair of textured black running boards with their triangular tube structure and integrated drop steps.

2. Kasaluyuan jeung Fitment

These running boards are compatible with the following Crew Cab models:

• 2009-2018 Dodge Ram 1500
• 2010-2026 Ram 2500 3500
• 2019-2024 Ram 1500 Classic

Important Cab Size Note:

• Only fits Crew Cab models with 4 full-size doors.
• Not compatible with Quad Cab or Mega Cab models.
• Not compatible with Chassis Cab and Diesel models.
• Not compatible with 5th Gen 2019-UP Ram 1500.

Image 2.1: Crew Cab Compatibility Diagram. This diagram illustrates the difference between Quad Cab, Crew Cab, and Mega Cab configurations, highlighting that only Crew Cab (with 4 full doors) is compatible.

For 2009-2011 and some 2012 models, minor drilling of 1/4'' holes through the pinch weld may be required for support brackets.

3. Daptar Bagian

Pastikeun sadaya komponén aya sateuacan ngamimitian pamasangan:

• Driver Side Running Board (1)
• Passenger Side Running Board (1)
• Mounting Brackets (Set for driver and passenger sides)
• All necessary hardware (bolts, washers, nuts)
• Pituduh Instalasi (manual ieu)

Refer to the detailed parts diagram in the included paper instruction manual for specific quantities and types of hardware.

4. Pakakas Diperlukeun

Alat-alat di handap ieu biasana diperyogikeun pikeun instalasi:

• Soket Wrench Set
• Torsi konci
• Drill (for specific models, as noted in compatibility)
• Pita Ukur
• Kacamata Kasalametan
• Sarung tangan

5. Parentah instalasi

It is recommended to have a second person assist with the installation due to the size and weight of the running boards.

Lengkah 5.1: Nyiapkeun Kandaraan

1. Parkir kendaraan di tempat anu datar sareng datar sareng rem parkir.
2. Locate the factory mounting points along the rocker panel of your truck. These are typically threaded holes.
3. For 2009-2011 and some 2012 models, if necessary, drill 1/4'' holes through the pinch weld for additional support brackets.

Lengkah 5.2: Pasang Kurung Pasang

1. Identify the correct mounting brackets for each position (front, middle, rear) on both the driver and passenger sides. Refer to the paper manual for specific bracket identification.
2. Attach the brackets to the vehicle's frame using the provided hardware. Hand-tighten all bolts initially to allow for adjustment.

Step 5.3: Attach Running Boards

1. Carefully lift one running board and align it with the installed mounting brackets.
2. Secure the running board to the brackets using the remaining hardware. Again, hand-tighten all bolts.
3. Adjust the position of the running board to ensure it is level and properly aligned with the vehicle.

Lengkah 5.4: Tightening Final

1. Once satisfied with the alignment, fully tighten all bolts on both the brackets and the running boards. Refer to the paper manual for specific torque specifications.
2. Ngulang sakabéh prosés pikeun sisi sabalikna tina wahana.

Image 5.2: Heavy-Duty Steel Brackets. This image shows the robust steel brackets with pre-drilled threaded holes designed for secure and easy installation onto the vehicle's frame.

6. Pangropéa

To ensure the longevity and appearance of your Tyger Auto LanderX Running Boards, follow these maintenance guidelines:

• Ngabersihan rutin: Wash the running boards regularly with mild soap and water to remove dirt, road salt, and debris. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• Pariksa Hardware: Periodically check all mounting hardware for tightness. Vibrations from driving can sometimes loosen bolts over time. Re-tighten as necessary.
• Pariksa Karusakan: Inspect the running boards for any signs of damage, such as dents, scratches, or corrosion. Address any issues promptly to prevent further deterioration.
• Lapisan pelindung: The dual-stage E-coating powder textured black finish provides excellent rust and corrosion resistance. Avoid scratching this coating to maintain protection.

7. Cara ngungkulan

If you encounter any issues during or after installation, consider the following:

• Running Board Not Level: Loosen the mounting bolts, adjust the running board's position until level, and then re-tighten all hardware securely.
• Leupas: Ensure all bolts are fully tightened to the recommended torque specifications. Check that the correct brackets are used for each mounting point.
• Bagian anu leungit: If any parts are missing from your package, contact Tyger Auto customer support immediately.
• Masalah Perlengkapan: Double-check your vehicle's make, model, and cab type against the compatibility section (Section 2). Ensure you have a Crew Cab model.

8. Spésifikasi

Image 8.1: Product Dimensions Diagram. This image provides a visual representation of the running board's length, width, and height.

9. Garansi jeung Rojongan

Tyger Auto backs this product with a 5-year warranty for US customers against manufacturing defects. For warranty claims, technical assistance, or any questions regarding your LanderX Running Boards, please contact Tyger Auto customer support through their official websitus atanapi pangecér dimana produkna dibeuli.

Punten nahan bukti pameseran anjeun pikeun validasi garansi.