Truper HILA-1600C Compact Electric Pressure Washer

Bubuka

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Truper HILA-1600C Compact Electric Pressure Washer. Please read all instructions carefully before use and retain this manual for future reference.

Produk Leuwihview jeung Komponén

Familiarize yourself with the components of your pressure washer to ensure proper assembly and operation.

Gambar 1: Hareupeun view of the Truper HILA-1600C Compact Electric Pressure Washer.

Figure 2: Diagram showing the main components of the Truper HILA-1600C pressure washer, including the high-pressure gun, 5m power cable, 500ml soap dispenser, 5m high-pressure hose, extension lance, adjustable lance, and quick connector for the hose.

Komponén Kaasup:

• Gun tekanan tinggi
• 5m kabel kakuatan
• 500ml Soap dispenser
• 5m High-pressure hose
• Lanceuk ekstensi
• Lanceuk adjustable
• Quick connector for hose
• Saringan cai
• Nozzle cleaner

Disetél

Follow these steps for initial setup before operating your pressure washer.

1. Ngabongkar Unit: Sacara saksama miceun sadaya komponén tina bungkusan. Mariksa karusakan naon waé.
2. Nyambungkeun suplai cai: Attach a garden hose (not included) to the water inlet on the pressure washer. Ensure the connection is secure to prevent leaks.
3. Pasang saringan cai: Insert the water filter into the water inlet connection. This prevents debris from entering the pump.
4. Sambungkeun Selang Tekanan Tinggi: Connect one end of the 5m high-pressure hose to the high-pressure outlet on the unit and the other end to the high-pressure gun. Tighten all connections firmly.
5. Assemble Lance: Attach the extension lance to the high-pressure gun, then attach the adjustable lance to the extension lance. Ensure they click securely into place.
6. Fill Soap Dispenser (Optional): If using detergent, fill the 500ml soap dispenser with appropriate pressure washer detergent. Attach it to the high-pressure gun if desired.
7. Sambungkeun Kakuatan: Plug the 5m power cable into a grounded 127V electrical outlet.

Figure 3: Visual guide for connecting the water supply, high-pressure hose, and assembling the gun with lances.

Parentah Operasi

Follow these guidelines for safe and effective operation of your pressure washer.

1. Nyiapkeun pikeun pamakéan: Ensure all connections are secure. Turn on the water supply completely before turning on the pressure washer.
2. Ngabersihan hawa tina sistem: Squeeze the trigger on the high-pressure gun to release air from the system until a steady stream of water emerges.
3. Mimitian Unit: Turn the ON/OFF switch to the 'ON' position. The motor will start, and the unit will build pressure.
4. Saluyukeun pola semprot: Rotate the adjustable lance nozzle to select the desired spray pattern (from a concentrated jet to a wide fan spray) for your cleaning task.
5. Larapkeun Detergent (Opsional): If using the soap dispenser, ensure it is attached. The pressure washer will automatically draw detergent when operating at low pressure or with the detergent nozzle.
6. Mimitian beberesih: Hold the gun firmly with both hands and maintain a safe distance from the surface being cleaned. Always start with a wider spray pattern and move closer as needed to avoid damaging the surface.
7. Pareuman: When finished, turn the ON/OFF switch to the 'OFF' position. Turn off the water supply. Squeeze the trigger to release any remaining pressure in the system. Disconnect the power cable and water hose.

Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur mesin cuci tekanan anjeun.

• Saringan Cai Bersih: Regularly check and clean the water filter to prevent blockages. Rinse it under running water to remove debris.
• Nozzle beberesih: If the nozzle becomes clogged, use the provided nozzle cleaner tool to clear any obstructions.
• Hose and Gun Inspection: Periodically inspect the high-pressure hose and gun for any signs of wear, cracks, or damage. Replace damaged parts immediately.
• Panyimpenan: Before storing, ensure all water is drained from the unit, hose, and gun to prevent freezing damage. Store the pressure washer in a dry, frost-free area.
• Manajemén Kabel: Wrap the power cable neatly around the designated storage area on the unit.

Pamérésan masalah

Tingal bagian ieu pikeun solusi masalah umum.

spésifikasi

Garansi sareng Rojongan

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official TRUPER websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.